Just a place to keep all of my 3D-Print designs.
Complete / Satisfactory
Hello!
Task
Wendell has a craaaazy A100 GPU. Guess what? It has no fan, and gets hot! So he tasked me with designing a model that will attach a blower-style fan to the end of the GPU.
This needed a mount
[30894_2M]
for this
[61cLW1mmq2L.AC_SL1500]
Constraints
He wanted it to fit like a glove onto the fan, have an angled/low part beside whe…
Hello!
I have created a 3D-print replacement button for the L1Techs KVM. You can always email wendell at level1techs dot com for your support options, but a quick DIY fix is to print & replace it. If your button gets snapped or whatever the case may be, I gotcha covered.
It might seem intimidating to take apart your KVM, but as long as you’re car…
Hello!
Task
Included in the M-Star Classic Model M Controller Conversion Kit is a 3D-printed Model M shim for the USB-B 3.0 port. I have been printing these and including them in the kits, but I thought making the model public would be a good idea.
Wendell actually had the G-Code for this already on the L1 printer SD card, but I couldn’t find th…
Hello!
Task
So for this little project, I was tasked with making some extender bits for the front panel of the new falcon case Wendell got! It’s a Knight Rider joke, where they extend the car into super pursuit mode!
Yanno…because Wendell pumped 1500 watts into this monster PC LOL
[Super Pursuit Mode Activated | Knight Rider]
Here’…
Hello!
Task
Wendell tasked me with #3dprinting a modified hard drive bay for his Fractal Design Vector RS case. The modified bay was to securely hold the ICY Dock MB924IP-B with the drives accessible from the top.
Fractal Design Vector RS:
ICY Dock MB924IP-B:
The hardest part was getting it to be sturdy. The ICY DOCK is very heavy empty.
F…
Hello!
Task
Wendell tasked me with creating a mount for his LianLi Dynamic case. The mount is to hold an eDP display firmly in place to the glass on the front of the case! @Autumn actually helped me with this one
Design
LianLi 011 Dynamic:
I went simple with this design, and I might add/polish it for future reference, but for …
Task
Wendell tasked me with creating a replacement backplate for a Honeywell thermostat.
What it’s replacing:
[th3210d1004-1]
Find it here:
Design
The first thing I did, was figuring out how much space I needed in the middle (1) to save filament, but (2) it wasn’t needed. The top is a catch for the latch on top of the thermostat, and the two…
Work In Progress / Complicated
Hello!
I thought it might be fun to make some 3D printable replacement backings/sides in case your KVM gets scratched, you want a new color/design, etc. This is just a fun little work-in-progress project from me when I have time.
PAAG-3112B
Object File:
PAAG-3112B Backplate.zip (12.7 KB)
[3112b]
Gcode:
PAAG-3112B Backplate gcode.zip (101.…
Hello!
Task
Wendell has reviewed several Minisforum PCs. They are great and have multiple ways to get more out of your tiny PC. PCI-E ports, SSD connectivity, M.2 slots, etc.
Wendell has an adapter similar to this M.2 B & M-Key:
[61SpyITHCbL.AC_SL1200]
He wanted to put it in the Minisforum M.2 Slot, but there would be nowhere to put the new …
Meh / Didn’t work out
Hello!
Task
Wendell tasked me with making a stand for the ICY Dock MB924IP-B in a tiny LianLi case. Ultimately, there would not be enough room, but I did make the design and give it a go!
LianLi Q30X mITX Case:
ICY Dock MB924IP-B:
I wanted to make a holder that would use the 4 holes for the SSD mounting in the bottom of the case. The diagona…
6 Likes
Neighbor teen got his 3d printer taken away.
He was making 3d copies of his " body part" and got caught passing them out to the girls in school.
Sexting on a whole new level🙄
7 Likes
How many did he make? Sounds like the kid had big plans.
1 Like
When everyone else went digital, he dared to go analog…
1 Like
Wow this list is getting big