Mac + Windows KVM Info

Hi everyone!

Something I get asked the most is, “Which KVM is right for me?” and I have noticed similar scenarios occurring. This will hopefully be a helpful hub to answer this question. This will probably be a decent bit of info, but I will add a table of contents for you to reference.

Mac Quirks

Before we get into what KVM you should get, you need to be aware of some limitations and quirks a Mac can have. The older the Mac, the worse the quirks.

Sleep Wake Failure

Sometimes Macs do not lik eto wake up from sleep. No idea why. It is unrelated to the KVM as far as I can tell.

https://medium.com/macoclock/how-to-solve-sleep-wake-failure-for-macs-bfc351a02354

DSC / Resolution compatibility?

They do not always implement DSC correctly (especially older Macs). If this Mac is one of those affected, you will be limited to 4K @60Hz, unrelated to the KVM’s capabilities. Make SURE you check that your Mac can display to your monitor before trying it through our KVM.

VRR Support?

“Some Intel-based Macs support VRR over their Thunderbolt ports via DisplayPort protocol. None support VRR over HDMI.”

“All M1 Macs and M2 (base) Macs support VRR over their Thunderbolt ports via DisplayPort protocol. They don’t support VRR over HDMI.”

“M2-M3 (Pro, Max, and Ultra) and all M4 Macs support VRR over their Thunderbolt ports via DisplayPort protocol. They also support VRR over HDMI.”

“USB Hub Depth Exceeded”?

INTEL Macbooks and M1 Mac Minis do not seem to have this issue, mainly non-intel M1 & M2 Macbooks.

I don’t know the nuances of it, however, it is something to consider. If you plug the KVM and a dock into the KVM, you could potentially get this error. You can get around it, though.

Examples from our forum:

https://forum.level1techs.com/t/dp1-4-kvm-w-caldigit-ts4-dock-update/209096/3

Solution:
We were able to solve this by having the KVM bypass a dock and plug directly into the MacBook or using the “Downstream thunderbolt port” on the Caldigit / dock.

Now that that’s out of the way, we can talk about your actual setup options.

Which KVM?

A lot of this section is listed in my “L1Techs KVM Diagrams - Common Setups & Info” thread. So I will link that here instead of repeating myself.

I have a Mac and a PC

Our most popular KVMs for this are the USB-C Combo or 10-gigabit DisplayPort because they have USB-C.

Combo Option

The benefit of the combo KVM is 1) it is power delivery and will charge your laptop as well as display, and 2) it combines the data and display on the bottom row into 1 USBC cable. This lets you use less cables from the input devices.

Your Mac + PC with the combo KVM means that your PC must have a USB-C output that supports DISPLAY & DATA. If you are unsure, I have found a helpful article from Startech to help you distinguish:

Now, if your PC does not have the appropriate USB-C port, you will have to get something like our USB-C Combiner and the output of this will go to our Combo KVM as shown in the diagram above. Anything else will have to be adapted to DisplayPort.

Adapters and cables will be recommended below.

DisplayPort Option

The DisplayPort KVM will cause you to have an additional cable coming from your PC and laptop. This is because the combo KVM combines the bottom display and data into 1, but the normal DisplayPort KVM does not. So, for a dual monitor setup, you will need 2x display connections from each input, and 1x USBC data connection.

Adapters and cables will be recommended below.

You Might Need a Dock

You will notice, our KVMs have a lot of connections. Our KVMs operate the best in a 1:1 ratio of input to output connections. If you do not have enough connections, you will need something to help with that. In most cases, people use docks.

There’s allll kinds out there expensive or cheap. Whichever you get make sure you read thoroughly that it supports your additional needs for the KVM. Most thunderbolt docks charge your connected laptop, so you might be more inclined to go with the DisplayPort option instead of the Combo KVM.

Please see my diagram in the referenced post above if you would like to have a visual for where the KVM goes in the connection stream.

Recommend a Cable?

** Buy these cables in the shortest length you can. The KVM has no repeater, and signal quality degrades with distance.

When considering what you need, think of the ports on your laptop / PC, go to the manufacturer page, etc. and see how you need to adapt the USB-C, HDMI, etc. into the KVM. Where or not you get a dock is up to you, both adapting and getting a dock are valid ways of using the KVM.

End

Just a marker for the end. If your use case is not listed here or something is unclear, let me know, and I will certainly add it!

1 Like