Open source friendly printers? 2025 edition

I have heard that brother is pretty good, but also I have heard that has changed recently?

Also, if you could reccomend a specific model and where I could buy it that would be wonderful.

Thank you

1 Like

Here’s a list for the devices the brlaser (found on all distros) driver supports

1 Like

I recently took a deep dive into this rabbit hole since I had to order a new printer.

Things are happening in CUPS land! (CUPS is the printing system used by pretty much all Linux distros.)

CUPS is moving to what they call driverless printing. Basically that means that any printer marketed as AirPrint, Mopria, or IPP Everywhere compatible should “just work”. (Under the hood this apparently uses the IPP 2.0 protocol and the PCLm Printer Command Language – PCLm being based on the PDF standard and thus completely different from e.g. PCL5/6 and Postscript.)

A database of driverless printers can be found here:

Other/older printers will no longer be directly supported starting with CUPS 3.0. They will be supported through something called Printer Applications, basically a piece of software using e.g. PPD printer driver files to emulate a driverless printer.
A database of such printers can be found here:
https://openprinting.org/printers


Edit: DO NOT use the brlaser link in the previous post to find a printer for Linux use! Those are mostly ancient or odd printers that aren’t even fully supported by the old deprecated standard.

Brother has Linux drivers for many of their models, either the brlaser driver @Baz mentioned or Brother provides drivers as rpm and deb packages for many of their models. I can recommend Brother, they are the last printer company for me not trying to fuck you over in my opinion. For example they don’t stop you from using third party cartridges or toners.

What’s more interesting is what kind of printing volumes you’re looking at

The Brother HL-L2350DW is a suitable option if you need an open-source friendly printer.

I have a hp deskjet ink advantage 2135
it just werks after running the hp-plugin command on my arch machine

Ideally, you put a printer on the LAN and everything starts printing to it.

I got a Brother, and went through the drivers rigmarole. Then a year later a mobo fault caused problems eventually forcing me to reinstall, and recover data from backups. In all the drama I forgot all about the printer drivers, and a month later, after printing something it suddenly occurred to me I’d done nothing to set up the printer. KDE had found it on the LAN and set it up automatically, and driverlessly.

2 Likes

This topic was automatically closed 273 days after the last reply. New replies are no longer allowed.