I have created a 3D-print replacement button for the L1Techs KVM. You can always email wendell at level1techs dot com for your support options, but a quick DIY fix is to print & replace it. If your button gets snapped or whatever the case may be, I gotcha covered.
It might seem intimidating to take apart your KVM, but as long as you’re careful and follow the video, you should be fine.
Note: This button should be compatible with most of the L1Techs KVMs, but some older models might use a different way for the button to be on the KVM.
final kvm button replacement.zip (39.1 KB)