So the other night I updated my system bios from 701 to 1003 ( 3/22/2022 release )
I had done the BMC from 1.14 to 1.16 the day before.
Today while browsing, the system just shutdown and restarted.
No errors in the logs, just click.
So I checked the bios settings and nothing was strange, no real changes I could see.
I did power the system down to cold boot it, voodoo tech troubleshooting.
The bios add support for the new chips and while I don’t have that I am a bit of a compulsive updater.
Anyone else seen an issue like this? Everything had been solid before.
Anytime a system becomes unstable after a BIOS update my first suggestion is to always run a memory test. If you’re on Windows run the ‘Windows Memory Diagnostic’ app or download MemTest86 to a USB drive if that’s not an option.
I’ve also updated to latest bios and FW version 3 days ago (previously I had the stock Bios/FW version). I haven’t noticed any sudden shutdown.
What I noticed was that the PCIe address changed of my GPU, and I had to reenable some stuff in Bios (reenable raid mode for 4x M.2 card).
I would check if there is any watchdog timer running. That happened to me once, where I forgot that I /accidentially enabled a watchdog timer, and suddendly the PC did a reset after 10 minutes.
I had no more issues yesterday, after stressing it some.
I think the full power off and subsequent ‘retraining’ cleared the issue.
After the first boot following the bios update there was a bios message listing drive info and telling me to enter bios setup. It mentioned amd raid, which I am not using. Perhaps they tweaked that a bit resulting in the PCI address change of the gpu.
I upgraded the BIOS to 1003 shortly after it was available and not issues. However, am not successful upgrading BMC to 1.16.
Would be interested hearing what you did to get it to upgrade?
Cheers
I can’t remember exactly, but I believe I did the bios upgrade via USB stick and from the BIOS menu, and
afterwards I’ve upgraded BMC via the Firmware update option in the BMC webinterface.
I’ve upgraded from the original BIOS and BMC version to 1003/1.16, since I’ve never did any updates before.
EDIT: I just did the upgrade to 1.17.0 via the BMC webinterface.
At what point is the upgrade to 1.16 failing?
I’m just doing the 1.17 now. Interesting that they came so close together.
No readme info so I guess it’s a bug fix for 16.
Just the ‘wolfpass’ section of firmware is being updated from 16.
Took about 5 minutes start to finish.