Video stopped working through KVM

KVM Model:

SQ7238992 – 1.4 Display Port KVM Switch - Single Monitor - Four Computer

USB Interface (5-gigabit or 10-gigbit):

10-gigabit


Problem:

Last week while using my desktop w/ Level1Tech KVM. the video suddenly cut out entirely. Nothing “happened”, I was just working, so I had email, browser, VS Code, slack, etc. open. There were no updates or anything happening.
I thought that was weird, but, I switched to input 2 on the KVM, which has my M5 macbook pro. That worked just fine, I used it for several hours to wrap up work and then get to troubleshooting my desktop.

First thing I did was just unplug everything from the KVM, and I swapped which device is on which input. So desktop moved to input 2, MBP moved to input 1. Plugged all the power back in, turned my desktop on and… still no video for the desktop. Video still did work for the laptop, so, I think the KVM itself is fine.

I never see the boot splash screen, GRUB, or anything (desktop is dual booted, Bazzite + Win10). Using muscle memory I booted into Windows, and was able to RDP in to see that it was running fine, no errors in event viewer, etc. I rebooted into Bazzite, but again, no video, and no apparent reason it wasn’t working. Since I’m not even seeing BIOS/Grub it cannot be driver.

I switched inputs to the MBP and it worked immediately. Switched back to desktop, still no video.

To simplify, I took the DisplayPort from my desktop and plugged it directly into the monitor. It worked just fine. The accessories were still plugged into the KVM, and when I selected the desktop input on the KVM, everything worked. So USB was fine, just no video.

I had two spare DP cables. So I swapped the ones that went from Desktop to KVM, and from KVM to Monitor with the spares. These were brand new, unopened DP cables. After swapping these, I STILL had no video on the desktop.

I went out and bought two more brand new Club3D DP cables, each 3’ ones. Swapped those in, and of course still nothing at all.

I even bought a new Level1Tech KVM - I previously had a 5-gbps single monitor 2 computer model. STILL no video through the new KVM.
I replaced my GPU, a 3080, with a 5070 Ti. STILL no video through KVM.

I’m at a loss and need help. This is killing my productivity. Only thing I haven’t swapped is monitor and I don’t have the time or money to do that. I struggle to think the monitor would be the problem since the MBP works fine and the desktop works when direct, even with high compute/gpu loads.

Other Notes:

Have even forced windows updates, GPU driver updates, BIOS/UEFI firmware update, reset CMOS. Nothing is helping at all. Just never get signal from desktop through the KVM via DP cables.