[Thanks Fam] Unholy ram purchase

Hi chat,

I am looking to purchase more ram for my z590 build. The ram I currently have is difficult to find or costs a fortune to obtain.

I currently have the GSkill Trident Z Royal:
32GB (2x16)
3600Mhz
16-16-16-36

Searching for another 32GB, so I would have to do the unholy thing and mix ram. Hoping that sticking to GSkill minimizes any errors.
I will have to go looser timings for price purposes.

Location Type Speed timing price
ebay G.SKILL Ripjaws V Series 3600 18-22-22-42 64
Newegg G.SKILL Ripjaws V Series 3600 16-19-19-39 80
Ebay G.SKILL Trident Z Neo 3600 16-19-19-39 98
Microcenter G.Skill Trident Z Neo Series 3600 16-19-19-39 100
Microcenter G.Skill Trident Z Royal 3600 18-22-22-42 110
ebay G.SKILL Trident Z Royal 3600 18-22-22-42 120
Ebay G.SKILL Trident Z Royal 3600 16-19-19-39 130
Microcenter G.Skill Trident Z Neo 3200 16-18-18-38 84
Ebay G.SKILL Trident Z Royal 3200 16-18-18-38 91

The second row, the Ripjaws at 3600 and 16-19-19-39 seem like a plausible option, understanding that all sticks will run at looser timings.

Will this create a giant headache for me and doomed for failure?
Do I give up a lot of performance with the looser timings?
Could I entertain different brands?

  • There are some good corsair kits on ebay.

Appreciate any advice.

WWED

Here is a small fork in the road, which I honestly didn’t even know about until I saw it on the internet. Although this is related to ddr5, sharing this just incase - 4 sticks of ram on a regular/gaming mobo quite often don’t operate outside basic speeds.

I suppose I should opt for a returnable option just in case, i.e. being careful with ebay sellers.

I admittedly don’t have much data to back this up, but I believe the aversion to ā€œmismatchedā€ memory is WAY overblown. The couple of times I’ve done it were just fine, running at the lowest rated speed/timings (most recently on ddr3, same brand gskill ā€œgamingā€ skus) or even overclocked just a little (way back in the DDR2 days, complete mismash of probably lower quality stuff from big box retail stores). I’m pretty sure I remember a LTT video (for whatever that’s worth to you) ā€˜investigating’ this and it was fine, and I’m sure there are others out there you could find.

1 Like

I would suggest not to mix different types of RAM, but get 4 sticks of the same model, and then you’ll have a working for sure system.

I agree, but at the near doubling of cost if I can avoid it. Thanks for chiming in, will make note.

I think the trick is to find a set with the same memory ic as current for potentially less headache. Think samsung b die for example.

Shit, used B-Die Finder and it didnt make the shortlist, yet the 8x2’s did

F4-3600C14D-16GVKA
F4-3600C14D-32GVK
F4-3600C14D-32GVKA
F4-3600C16D-16GVK
F4-3600C17D-16GVK

You Know I love Newegg, is there a Microcenter near you? if you’re willing to spend that much if you have that is, go for it there for 4 of them, but Newegg is the better option too IMV for 4, I can’t trust e-bay for computer parts.

Ripjaws are killer overclockers at lease when I have them on my ddr3 system. Better then trident since they are usually at there peak.

If not pushing then sell the trident and get the ripjaws and call it a day if you need more ram

imo, the best thing to do in this case is ignore brand entirely, and get something with very similar speed, density, primary timings, and identical voltage, from another brand, since it’s more likely to be using the same ICs, even if it’s from a totally different brand. When in doubt, higher speed or tighter timings, or lower voltage are a safer bet.
Brands and product lines have no real meaning in RAM. Ripjaws is just a bunch of letters on a sticker. The timings at a given speed and voltage, though, tend to indicate what ICs are likely under the hood.

Another option is to buy a new kit and sell your old sticks. After all, if you’re looking for them, maybe someone else is too.

3 Likes

Thanks all,

I’m mulling 2-3 options for purchase of a used kit on eBay, If it fades into next week and the bids surpass my valuation comparables I’ll look for a 16x4 kit and sell the 3200 gskills I have in a different system

If you do end up going the different kit route and sell what you have, 32GBx2 may offer you better stability instead of 16GBx4 depending on the motherboard. Also opens up being able to add another 64GB down the line if you find another secondhand kit.

I’ve got a bid in on this for $50 before tax and shipping which is the max I want to spend. Realistically a new core of a computer can be had at Microcenter for 400-500 bucks. I want to keep this as low and close as possible

Those ripjaws should get to the same speed as your tridents with a little overclock to them. Seems like a good deal

1 Like

Received the Ripjaws. No startup errors, worked first try.

Not tolerant to tighter timings or even the smallest incremental OC.

But more RAMZ so. Once I get my GPU pass-through issue sorted, I’m ready to go.

Thanks Y’all

This topic was automatically closed 273 days after the last reply. New replies are no longer allowed.