It is, several boards are like that where some or all of the m.2 are open ended. you can use some cards in them (e.g. usb cards) though slower.
2 things.
-
The background music was one point. What was it called? Nothing that references it in the description
-
You seem to have forgot something in the description
3 Likes
Looking forward to these memory tests.
I basiclly wanne know if the Asrock bios is improved on memory overclocking aswell.
Because on the X370 Taichi board certain bios versions were a bit wonky wenn it comes to memory timings.
So… what where those memory timings?
Just get one of the high end X370 boards, no reason to go X470 with a 1000 series CPU.
I would argue there isn’t even much reason to go with X470 with a 2000 series CPU, the stuff you get is not worth double the price (at least that’s the case here).
But that’s just my opinion.
It’s from incompetech as usual, can’t say for the title, but I heard it a few days ago when I was searching for another one.
1 Like
Wendell mentioned ryzen getting a touch hot with overclock and I was wondering what kinda temps other users were getting.
With my old FX-8350 rig under load my Noctua NH-D14 could keep everything under 40c even with a healthy overclock.
With my Ryzen 2700x I have a Noctua NH-D15 and I am seeing temps around 50c and sometimes up to 60c unless I really push the fans. From what I see it’s mainly due to it auto overclocking but still even with a hefty cooler like the one I am using I was kinda surprised.
So what are other users seeing for their temps?
Love the videos about IOMMU by the way, I’ve got my old rig running proxmox and playing with iommu with some success.
On my Kraken x62 my 2700X stays at roughly 40°C when gaming. I stress tested it with OCCT a while ago and hit about 48°C degress (but I only ran if for 10 minutes).
Edit: Thus far I’ve undervolted my CPU with -50mV without any problems, once I hit my CPUs peak (or once I’m satisfied) I’ll create a seperate thread. This might also effect the temperatures a bit.
60°C is totally fine.
Its exally pretty good.
1 Like
Yeah 60s is fine.
My passively cooled firewall box sits on 60-65C all day, every day. Has done for 1-2 years at this point.
I can only tell you that my G.Skill 4133 C19 kit won’t run stable at anything above 3200. Testing with mprime -t throws errors. I can set the proper timings (14,14,14,14,34) but even running the XMP timings I can’t raise clocks. It will post up to 3600 or even a bit higher but it isn’t stable. I got the board with version 1.20 (which isn’t listed on the website btw.) and I am now on the latest Beta BIOS 1.36A on the Taichi Ultimate.
My system is stuffed into a short 4U rack case and the best cooler I can fit is the NH-C14S. I get around 55°C in games at low rpm, 65°C under real load and when mprime runs the worst stuff it gets up to 72°C at around 1300-1400RPM. At that point the system is definitely audible but still acceptable. … I bought it to run fast, not silent. 
2 Likes
Important question:
Do the gears actually spin?
Only with the correct lego technic addon.
1 Like
None of the Taichi paints would have ever worked since the first Taichi board sadly 
I wonder if anyone at Asrock has ever seen a gear before…
Why not clamp 10-15A solid core copper wire to the rear heat pipes & do a short run back to the fan grill screws, to dissipate more heat?
Didn’t see any mention of only 2x 32 GB sticks? It does list support for 4x dual-rank modules (i.e., 4x16 - albeit at fairly low clock of 1866).
Yeah, if you need that much RAM a server platform with registered memory is probably a better fit. I have 4 x 8GB G.Skill Trident-Z 3200 CL14 (that’s single rank Samsung B-Die) running without issues in my daily system. It’s just important to keep temps in check. When my 2700 passes 70°C it can throw errors in mprime.
I’m actually running 4 x 16GB DDR4-2666 Crucial ECC DIMMs in a Taichi X470 without issue.
2 Likes
Hey vkfu,
how can you tell if the memory is running in ECC? I just put a system together and the BIOS is not listing my Crucial ECC DIMMS as ECC.
EDAC, dmidecode and lshw can do that.