Hello everyone,
I recently picked up a FriendlyElec CM3588 Plus NAS Kit (32GB RAM), but I immediately hit a wall: I didn’t want to run the usual suspects like Armbian or OpenMediaVault. I wanted a true Red Hat-based enterprise environment, but nothing existed for this board.
So, I decided to build it myself.
After some trial and error (and a kernel transplant), I successfully have Rocky Linux 10.1 running on this board with full hardware support. It’s not just booting; it is a fully functional, SELinux-enforcing storage server.
The “Frankenstein” Specs:
- OS: Rocky Linux 10.1 (Red Quartz) Userspace
- Kernel: Custom Linux 6.1 (Rockchip Vendor Tree)
- Storage: 4x NVMe Drives in RAID 5 (MDADM)
- Filesystem Management: Full Stratis support
- Security: SELinux is Enforcing and stable
Performance & Stability: Everything is working out of the box—2.5G Network, USB, and eMMC. I am currently rebuilding the RAID 5 array, and the performance is surprisingly good for an ARM board:
- Peak Rebuild Speed: ~600 MB/s
- Sustained Speed: ~440 MB/s
- Long Term Speed: ~250 MB/s
Current State & The Image: Right now, the kernel is “static” (manually compiled Rockchip 6.1), meaning it won’t update via dnf just yet—I’m working on packaging it properly for easier management later. However, for a set-and-forget storage appliance, it is rock solid.
If anyone is interested in running RHEL/Rocky on their CM3588, I am happy to share the image.
Let me know if you want to give it a shot or if you have questions about the build process!