Stepping up my home lab setup - Advice needed

Hi all,

I’ve been running a “mini” home-lab for the last 3-4 years, mostly experimenting and learning from it. But, I’ve fallen into the trap of homelabs. It runs through my blood now. Ok, it’s about time to get serious :smile:


First of all, here is my current setup that I’ve had for quite a while now. Raspberry Pi 4B+ (RAM: 4GB), running:

  • OMV (1.5TB eHDD connected via USB 3.0)
  • Docker
    • PiHole
    • Jellyfin
    • Portainer
    • Forgejo

I need a better NAS solution, so I can backup both my PCs mine and my dad’s PCs. I recently got a Mac mini to replace my old desktop, so I’m planning to repurpose the old desktop as my new main server.

The old desktop was a Dell Vostro 3888 (specs below)

  • Intel Core i5-10400
  • 48GBs of RAM
  • 1Gbe Ethernet built-in
  • 1TB nVME
  • 3 SATA Ports
  • 2x PCIe x1
  • 1x PCIe-x16 (currently occupied with a NVIDIA GT1030)
  • 1x PCI Slot

The server would primarily be used for: NAS, Virtual Machine(s), and some docker apps (Jellyfin, Forgejo, n8n, etc)

I am planning to buy either 4x 4TB HDDs or 4x 8TB HDDs (depending on budget). This means that I need to get an HBA card to connect the fourth HDD. Moreover, I’m considering of buying a 2.5Gbe NIC so I can benefit from the NAS speeds.


From my understanding, I think the best approach would be to

  1. Install Proxmox first
  2. Run TrueNAS as a VM
  3. Passthrough the HBA Card/HDDs directly to the TrueNas VM
  4. Use TrueNAS to manage my storage (RAID 10 maybe?)

I’m unsure about the boot layout. Should I install Proxmox directly on the 1TB nVME, and use that drive too for VMs? Or, would it be better to get a separate 64GB SSD to install Proxmox on?

My other major concern is network security. I consider myself a bit paranoid “ADHD” and I do not want to expose anything unnecessarily, especially that the server will contain personal backups and family data. I’d like to structure the network in a way that lets me benefit from the hardware while keeping the NAS and important services as secure as reasonably possible.

Thank you in advance for reading this long post. I’d consider myself intermediate with homelabs, but I always have this feeling that I’m missing a lot of skills and that I’m missing important fundamentals, so any guidance or criticism is very welcome.

1 Like

I think if you are at all worried about drive management then getting a separate boot drive would be ideal. My old ‘gaming pc turned home server’ already had good candidates for separate boot and VM drives so I just did that and its made me feel way more comfortable about playing around and wiping VM disk images when I’m done with them. If you would consider yourself advanced with linux disk management and feel comfortable that you know the edge cases then go for it.

Looks like a nice build. I second getting a drive for proxmox / host OS. What I’ve found with Truenas and Zfs is it’s a nice feeling that your data disks are their own entity, and if you had to you could move them to another machine and everything would be fine. No conflating your data and the OS, you might want to tear down and play with that host disc. Also my data discs are rarely used at home tbh, so they get very little IO and hopefully last a long time. Someone mentioned in one of my threads that Proxmox can write a reasonable amount of logs, so put that wear on some other disc, not your data ones. If your use is quite low you can really get thr NAS power usage right down if you play around with different settings.

Also I’ve recently gone through a “more than 1Gb” upgrade for my homelab and it was fun so I can recommend. It’s nice seeing Truenas stats that aren’t capped by network bandwidth. I found a TPLink TX201 for £19 on Amazon, and a returned Asus XG C100F 10GB half price (open box) for £50. Hopefully you can find some good deals if you dig around.

Good luck, have fun.

Oh also I bumped into a series of Lawrence Systems Truenas vids yesterday, first two in the series are on setting appropriate share permissions and hardening.