SOLVED: How to take a BIOS screenshot? (from a consumer gigabyte MB)

TLDR;
SOLUTION: SOLVED: How to take a BIOS screenshot? (from a consumer gigabyte MB) - #16 by EfPe

How does one take a BIOS screenshot?
I recall some post here with images that seemed like a “direct” BIOS screenshots. How does one do that?

Way back in the “old days” if one had LPT printer and pressed “print screen” - the screen was printed via printer :wink:

1 Like

You could use a video capture device or use a phone/camera to take a picture and crop it.

The LPT printer, print screen thing might still work if you have an LPT printer. I still regularly see pins for them on motherboards.

1 Like

I have previously took photos, but hoped to avoid it this time :sweat_smile:

LPT: I doubt it will work with all the UEFI madness.

1 Like

Msi mobos have a screenshot tool built in. Don’t know about other brands.

2 Likes

Sadly, I’m shackled with gigabyte mb :expressionless:

Insert a USB stick (edit: GPT-partitioned and formatted with FAT32) and press F12!

3 Likes

On a server that has a BMC (“iDRAC”, “iLo”, “LOM”, “IPMI”, etc.), you can get a remote console (via HTML5 or Java) with a bit-perfect console.

For a regular PC, if it has Intel vPro or AMD DASH, you can do the same.

Businesses often (also) have IP-KVMs, which plug-in to the VGA or DP and USB port of a server, and again give you an HTML5 or Java based remote console view.

Otherwise, well, there are lots of very cheap ($6) USB HDMI-capture devices. I’ve found the picture slightly blurry but perfectly serviceable, and they come in quite handy:

1 Like

Thanks I shall try this!

Thanks, I do know about all these and use them at work. Was just hoping for an easier way to do this with consumer MB.

I still use Print screen as my screenshot tool (Spectacle/KDE) defaults to that key.

Just get a board with IPMI. Do it all in your browser, at home or on your phone. Either via remote BIOS as seen below or via KVM session (stuff is working, can’t reboot atm).

Things don’t need to be complicated…IPMI/BMC is so convenient for so many things.

1 Like

Sorry, but at present - I cannot go back in time :smiley:

There are USB dongles…PiKVM, nanoKVM or what they’re called. Get’s you most of the important stuff. Full on-board BMC has a lot more to offer, but for basic remote management, they’re a good substitute. And if you have a remote machine in a browser window, you can just screenshot the damn browser :wink:

I wouldn’t buy one just for making screenshots tbh :wink:

1 Like

Yes, I know…

Sorry - I should have been more specific - This is a consumer board from gigabyte, and it actually exists (for quite some time now). And I lack a time machine.

When it comes down to it - setting up pikvm / jetkvm / nanokvm seems like too much work - would rather just take photos.
Why? I am going to update my post regarding a “nightmare” MB of mine with lates BIOS settings - since somebody came around here, and made an account specifically to ask me for updated screen shots :sweat_smile:

Seconding what @homeserver78 said, This refers to an older gigabyte board, but more than likely F12 or PrintScreen keys will still work when you have a FAT32 formatted USB drive present.

Rufus is my preferred utility for directly formatting USB drives: GitHub - pbatard/rufus: The Reliable USB Formatting Utility

1 Like

Thanks! I will try this.

I’ve been formatting things with all the FAT versions sine 1993, so I think I’ll most likely manage even without rufus :smiley:

@homeserver78
@Log
Thank You guys once more, F12 works.

5 Likes

This topic was automatically closed 273 days after the last reply. New replies are no longer allowed.