Proposed part list
- B550 EliteMini (borrowing from wendell to prototype)
- R5 5600 non X
- 2x16GB 3200Mhz so-dimm (borrowing from wendell to prototype
- 500GB m.2 SSD (already have)
- RTX A2000 (on order)
- SNES chassis ( think there is one in the basement)
Specifications
- 2x blower fans
- 2x 40mm fan
- 200w power brick
- barrel jack splitter
- thermal pads
- copper IC heatsinks
- Type-c 10Gpbs extender
- wifi antenna
- 2X SNES controller to USB converter
- probably some right angle adapters for display port, barrel jacks, type C, ect
- PCIe riser 4.0
- Powered Bifurcator
Snes Shell Mods
these hole will be expanded and used as exhaust “nostrils” since you can’t really see them for any view besides the bottom
I still want to retain the sleeper look as much as possible
For even more cooling, I decided to cut out the bottom and leave the fans exposed
After bottom cutout
Rear Connections
Before
After
Cartridge Screen Mod
We were going to use a screen on the cartridge, but it mysteriously broke and welp, there goes that xD
Snes Controller Mod
I believe I can make the controller ports Polymorphing because both USB and SNES controllers use 5v and has 2 unused pins
I can have a SNES controller port to USB adapter plug to plug in type A things or use a standard SNES controller and have it go through a converter as a USB controller
Controller github used
Right angle snes adapter
https://www.aliexpress.us/item/2251832707909302.html