Recommend Mini PC with 2 Thunderbolt ports to use Mac Studio monitors on linux

Hello everyone,

Att Mods: If this is in the wrong place, please move my post.

I have reached a massive point of frustration in my little tech world. I am changing careers from an Executive Sous Chef to DevOps Engineer. So far, I have done the following:

I have learned basic bash scripting.

I have learned the basics of containers.

I have built an AI machine with both a 5090 and a 3090 with a GPU taint.

I built and tore down a a Kubernetes cluster that I built from 3 Minisforum MS-2A’s, a Mikrotik CSR, and a Mikrotik 4 port SFP+ switch. Everything is on 10G.

In order to better understand Linux and prepare for the LPIC-1, I just completed (but probably not) installing my first ever Arch Linux Platform. I partitioned the drives (boot drive + one LVM spanning 2 NVEM’s, I encrypted the drives, set up basic security, I installed Hyprland first (because that is what the cool kids do) and started fill it out with hyprpolkitagent, kitty, hyprpaper, mako, hyperlauncher, dolphin, pipewire, xdg-desktop-portal-hyprland, waybar, and wl-copy. Next I’m going to install sway because I want a proven rock solid environment when I am ready to work.

The issue I have is now this. Now that I have built Arch Linux, I want to use it! My main machine is a Mac Studio M2 Ultra that has 2x Studio Displays. I have done a tone of research and the bottom line is, if I want to run any distro of Linux at the computer I sit down at, I have to get rid of the Mac. This is not a problem, I got it for something else and it became my main machine just because I used it and I Ian’t rich. But their seams to be no way to do this and keep my studio displays. So here I am looking at having to replace my 2x studio displays because I am leaving Mac on top of getting something I can use as my daily Linux driver.

I’m hoping I am flat out wrong. If someone has a good solution that would be AMAZING! Ideally, I cheap mini pc that would run Linux and push the two Studio Displays would be perfect, but I don’t think this exists.

In the future, I want to expand the current cluster to 5 nodes with self healing. Then I want to build an Strix Halo based AI cluster, that runs next to my homelab cluster. I am trying to document everything I do on X and Linkedin as part of my “resume.”

So, now that you know where I am, what I am doing, why I am doing it…

Can anyone help me with a solution that makes sense with out setting my back accounts on fire.

P.S. I will NEVER be a part of Windows, Apple, or anyones else’s walled garden again. Forget ‘Own Nothing and be Happy.” That is retarded, I want to “Own Everything and be Free!” And then help everyone else do the same.

Thanks

why, they have thunderbolt 5 ports (probably displayport over thunderbolt). Do they have something that prevents the use of non apple hardware?

Looking online I get people on reddit saying they use it on ubuntu 3 years ago

And also link a phoronix article talking about the brightness control driver being submitted to linux kernel in 2023, and I assume its merged by now so that should work even if they implemented it in their own bullshit proprietary way instead of giving buttons or using the I2c channel in the displayport (does that not work over thunderbolt, who knows).

Looking more around, there is also a tool to adjust brightness from linux

Just get a device with 2 thunderbolt ports that support display out and it should work on linux in theory

Here a mini pc that should work for whst you need MINISFORUM Venus UM790 Pro Mini PC AMD Ryzen 9 7940HS up to 5.2 GHz 32 GB DDR5 1TB SSD with AMD Radeon 780M, 4X USB3.2, 2X USB4, 2xHDMI 2.1, 2X PCIe4.0, Wi-Fi 6E/BT5.3, RJ45 2.5 G

I don’t know your budget so take the session with a grain of salt

Yes, these are the issues I keep reading about. Apple has apparently made it difficult to run their monitors on other people equipment and I have way to much to do to sit around for a few days trying to figure out drivers and what not.

Thanks, I will check into it.

A mini PC with two thunderbolt ports might not be needed, you can chain multiple Studio Displays together and use a singular thunderbolt cable as thunderbolt supports daisy chaining

No problem, sorry for the spelling and grammar mistakes