So I got an heatpump from daikin, it has an older wifi smart module and I’m trying to get it on my network. I set up a new specific 2,4 network for it, but I can’t get it to work with my unifi 7 router, so I set it up with an old router with the same ssid and pw and on that it works fine.
So I’ve been trying all the tips around for the unifi, but I’m a bit lost for ideas, so I was wondering if anyone had any good ideas or previously experienced something similar.
The daikin adapter is BRP069A41, and the router is the ubiquity express 7. Would prefer not to be running a separate router just for this device
Yeah, I’ve dealt with those pieces of junk before. They need a consumer router that supports adding clients via WPS. If you have an old consumer router kicking around you can double-NAT it behind the Unifi and use that to connect the Daikin module.
Well you actually don’t have to, the older ones you are able to put it in ap mode, connect to it with a phone or pc, then send it the wifi ssid and pw through an exposed web portal using http, simple commands.
That is how I got it to connect, to the old router, thought maybe it was possible to fool it with the same ssid and pw for both and then switch it, but no such luck.
Also discovered it is a plus when using home assistance, since your able to send those commands locally with out cloud communication.
Well maybe my homey bridge can do it with ir if I don’t bother setting up the secondary router.
Older (and quite frankly even a lot of new) iot devices have trouble connecting to a wifi network that isnt a classic wpa2. Yes in theory wpa2-wpa3 mixed should allow them to connect but they often enable wireless features that confuse the crappy wifi modules in the iot device.
Same for many modern devices set to generate a wpa2 wifi, they often enable some optional feature or whatever and this breaks old iot wifi modules.
The only wifi aps that i could get working (besides using old ones from the same era) are with openwrt firmware, where you have more fine control over what optional features are actually enabled or not in your wpa2 wifi
Yeah I thought it was from the wpa3 first, but I changed that, then because it was an ssid with a space, then maybe the channel, so locked it to ch6, then it would be a min speed issue, so put it on 1mb forced, but still nothing