Minisforum MS-A1 - custom build info need?

[dreadknot2077]

does anyone know if i use a ryzen 7600x or 7700x with the Minisforum MS-A1 ?

an could i get 144 to 165hz refresh rate vi the display port on ubuntu 24.04 lts ?

also , unless im missing something that this unit take desktop cpu’s does the mean the cpu mounting

might allow a cpu cooling fan like Thermalright AXP120-X67 59 CFM CPU Cooler

or a arctic freezer III to that mobo , im ok with having a open case like that in my rack

iv got a custom rack shelf that mounts a twin 5.25in bay an rad for an old open frame build that i once had , that was to big but if i could use this with my 280mm aio an burner an 5.25in bay raid adapter that would be great as id

get far better horse power in a smaller footprint then my current setup.

[AlfieAvery]

For the Minisforum MS-A1 custom build, you might wanna start by checking the power supply requirements and ensure compatibility with your chosen components. Also, look into the thermal management to avoid overheating issues.

[LiKenun]

I’m curious about the “U.2” support mentioned on their page.

If it’s a typo though or it’s situated in a spot that can only accommodate z-height < 15 mm…

[scentilating]

@dreadknot2077

does anyone know if i use a ryzen 7600x or 7700x with the Minisforum MS-A1 ?

an could i get 144 to 165hz refresh rate vi the display port on ubuntu 24.04 lts ?

also , unless im missing something that this unit take desktop cpu’s does the mean the cpu mounting

might allow a cpu cooling fan like Thermalright AXP120-X67 59 CFM CPU Cooler

or a arctic freezer III to that mobo , im ok with having a open case like that in my rack

iv got a custom rack shelf that mounts a twin 5.25in bay an rad for an old open frame build that i once had , that was to big but if i could use this with my 280mm aio an burner an 5.25in bay raid adapter that would be great as id

get far better horse power in a smaller footprint then my current setup.

This is what i did with my MS01. I think theyre the same with different processors upon cursory inspection. I have mobo dims and hole spacing for mine.