KVM issue with HID devices (Logitech Bolt)

KVM Model:

1.4 Display Port KVM Switch - Triple Monitor - Two Computer

USB Interface (5-gigabit or 10-gigbit):

10G plugged into 10G port


Problem:

Every morning I have to power cycle the KVM to get it to register my Logitech Bolt Reciever.
The reciever is plueed into the HID port on the back but have tried it in all the ports (non-HID included).
It does very occationally work.

Other Notes:

It may be exasturbated by me always sleeping my PC2
PC1 is a laptop so it’s anot always connected - not sure if it has any relevance.
I also experience that some days my keyboard (and mouse post KVM power cycle) won’t wake PC2.
I have 2 mice; MX Master (on bolt reciever in KVM back HID) and SUPERLIGHT reciever directly in PC2 10G
I have Keychron K8 on cable to front HID port on KVM and the reciever plugged intp PC2 10G - this is because you cannot change configration on the keychron when plugged in through the KVM the webbased keychron launcher wont recognize it so I flip the board to wireless for config and back to cable for KVM use.
I have a ProArt X870E-CREATOR WIFI board
The KVM is from summer 2023 but never got around to using it as i lost my main PC around the same time and only just reinvested in a gaming PC in december 2025.

I’ve read a little ont he forum but couldnt find anything that fit with my issue or the conversation was way over my head :slight_smile: