I just bought an Asrock X870 Tachi Lite, a 9950X and also 2 sticks of Kingston 48GB DDR5 5600MT/s ECC Unbuffered DIMM CL46 2Rx8 based on 24Gbit Hynix M dies (KSM56E46BD8KM-48HM)
Unfortunately this does not seem to work. I’m stuck with error code 50 or 49 which indicates memory incompatibility. I already used Flashback to flash the newest BIOS. I’m aware that these sticks are not on Asrock’s Memory QVL.
Before I return the sticks and go with non-ECC sticks I would like to see if someone is successfully running these sticks. If not, then I will replace them with either a kit of Corsair CMK96GX5M2B6000Z30 or 2 sticks of Kingston KVR56U46BD8-48.
Currently I’m favoring the Kingston sticks since they run at a faster JEDEC base (I believe 5600 vs 4800). I’m a bit worried using EXPO on my Homelab server which is also a ZFS NAS.
One more question. Asrock states that this board supports up to 256G RAM. How if the biggest sticks on their Memory QVL are 48G and then they support only 2 sticks maximum? Is all above pure lottery?
Code 50 means “memory initialization error”. I believe code 15 is memory training and I have never even seen 15 so far.
I have tried each stick individually in all 4 possible slots and have reseated the CPU. No success so far, always code 50 sometimes 49
Unfortunately I do not have any other memory stick. Since all my HW is new, I can not exclude CPU or motherboard issues. But from the error code and since my sticks are not on the QVL a memory incompatibility is the most likely problem.
Luckily I built a PC for my parents using an Asrock board in December so I took my RAM and CPU to their place for testing. No issues at all, my parents PC booted without issues and also passed a 1h memory test.
I also updated their BIOS just to make sure we are running the same version and compared the Memory QVL which do match for both boards as well.