OS: Windows 11Pro For Workstations & Ubuntu .
AMD Threadripper Pro 7985WX 64-Cores / EK-Quantum Velocity² AM5 Nickel + Acetal
ASUS Pro WRX90 SAGE-SE / Sabrent Rocket 8 TB / ADATA legend 900 2 TB / Crucial T700 4Tb
768GB (8x 96gb) Micron RDIMM Ram - water cooled
ASUS Hyper M.2 PCIe expansion card with 4 Crucial T700 4Tb
4 Samsung 870 EVO 4Tb / raid 10 configuration
Duel 4090 FE - water cooled with EK APB water blocks
Case Lian Li V3000 Plus / Singularity bottom & mid duel D5 Distro plate
20 Phanteks D30-120mm fans
1 EK-Quantum Surface X560M, 2 EK-Quantum Surface X480M
Is anyone familiar with Wrx90 sage se bios setup for Threadripper Pro; when i go to setup it says that it’s unable to connect to network because of network or firewall? I am also having a little trouble getting raid 10 to work on PCIe expansion card. Besides this the system is running smoothly without any issues so far I’ve only benchmarked through CineBench and got Score of 85,000 while temps stayed around 34c.
Would Highly Appreciate any suggestions
Hello @TheM1rz
Thanks for sharing photo of your build. It is admirable & like that green theme. I am using the same motherboard ASUS WRX90e but cannot find the D-RGB header.
How were you able to connect your fans RGB?
I will highly appreciate your answer.
Thanks.
Kinuthia
Lmk if youre still struggling wit mh raid 10, have to enable bifrucation then nvme raid if youre going thst route
Hey @wendell ; I’m still having trouble getting my hyperM.2 to raid . Tried everything I could think of / find online including other raid types. Even downloaded AOMEI partition assistant. The 4 M.2s are recognized in card but not sure if this signifies system recognition of expansion card itself. I have put into bifurcation and NVMe mode but have no clue how to get it to start raid ; it just partitions drives and doesn’t do anything afterwards & AOMEI can’t select the array it’s non existent. Only shows my hard drives raided together.
The 4 evos are in raid 10 working perfectly ; Am I only able to run a single raid configuration per MB?
The only thing I haven’t tried is the last resort windows boot raid . Not best option because would require a full reset and windows reinstall .
@KinuthiaGichuhi Thanks man ; So to get RGB working on Asus WRX90 sage SE ended up using the Lian li controllers connected to a few fan splitters. Singularity stuff is controlled through an RGB remote fans are controlled by Lian li software.
Hope this helps
Let me know if you need links to specific products I purchased.
Ps - Automatic AI training for fan curves / heat management for this MB is OP!! As time goes on it will learn to stay colder .