Help with Home Network - OpenVPN WiFi Internet Access

Hardware Hub Networking
1

Hi guys,

First time post on this forum so please excuse me if I seem to be asking a dumb question.

So, I have pfsense setup on a home network using the following two guides adapted for my own needs:


https://nguvu.org/pfsense/pfsense-baseline-setup/

I am using an external WiFi AP connected to my IOT network through a GS108E switch. For additional WiFi security on my IOT network (VL20_IOT), I have added OpenVPN with FreeRadius3 2FA using the following guides:


https://vorkbaard.nl/how-to-set-up-openvpn-with-google-authenticator-on-pfsense/

My OpenVPN connection between Android device and pfsense is working fine, however, I am unable to get to the internet on the Android client device.

I have attached screenshots of my firewall rules, NAT, etc.

Net1
Net1.PNG1161x622 65.3 KB

Net2
Net2.PNG1143x460 43.2 KB

Hoping someone can help me out with how I can get this working?

Many thanks in advance.

2

If you make an allow any to any rule do you get Internet access?

3

No. Nothing at all after adding allow an any-to-any rule. Just getting a connection timed out error on my device.
I wonder what is causing it. As I mentioned in my introduction, I am not using this for remote access from outside, I just want to add an additional layer of security to my WiFi.
Thanks for contributing to my question.