Help dial in voltage please on my 2600x

[dreadknot2077]

help dial in voltage please im tring to set 1.4volts on the vcore for my amd 2600x at 4.075 - 4.1ghz

my core gear is

cpu - 2600x oc to 4.075ghz

mobo - gigabyte AORUS B450M

ram - 2 x Crucial Ballistix 16 GB (2 x 8 GB) DDR4-3200 CL16

with these volt settings

Dynamic Vcore(DVID) +0.234**
Dynamic VCORE SOC(DVID) +0.030
DRAM Voltage (CH A/B) 1.330V

an i cant tell if im getting it right

i have tried both global c states both enabled an disabled an auto

it seems more stable with c stats disabled but at the boot bios screen

it reads a peak of 1.380 volts but at main screen it looks like im getting 1.46

[Album] volts

under the gnome extension vitals iv cant tell how to read which volt

reading refers to the vcore volts reading help me with this please

[Kocytean]

What LLC settings are you using?
PBO on or off?

also - are you trying to set 1.4v all the time? thats a heck of a lot…

[dreadknot2077]

the aorus b450m doesnt have LLC settings an i dont know what
PBO on or off is

an like i said i cant tell what the vcore is at at load to even know if i hit 1.4

vitals doesn’t label the volts so im either way under or way over the mark

thers two steady 1.35volt reads an one 1.44 - 1.46 volt read

one i assume is the ram read but the other two is a toss up on which is which this is what i

need help determining which is the vcore read