Epyc 4545p on Gigabyte X870-I Mini-ITX board doesn't boot

After watching Wendell’s video on the Epyc 4545p, I really wanted to get one going in my mini rack. I wanted an ITX board that had USB4 so I could attach my SAS HBA to it, and I ended up choosing the Gigabyte X870I Aorus Pro Ice (rev 1.0) mobo. You’ll be astonished to hear that the Epyc is not on the supported CPU list for that board, but I decided to give it a go anyway.

https://www.gigabyte.com/Motherboard/X870I-AORUS-PRO-ICE-rev-10

The good news; it POSTs, completes DRAM training, and I can enter the UEFI menus. UEFI correctly identifies the Epyc processor and seems fully functional. My board arrived with their F2 firmware but in the course of troubleshooting, I also tried F4 and F7a (the latest).

The bad news; I never get anything other than the UEFI BIOS to launch. From the boot status LEDs, if I don’t interrupt the normal flow, and I do have a bootable medium connected, it quickly moves past CPU, spends a while in DRAM (as you’d expect), a couple seconds in VGA, then flashes to BOOT for only a moment before starting back over at CPU and repeating, seemingly ad infinitum.

I’ve tried turning off Secure Boot entirely, and I’ve run through this process with Windows 11 and Arch Linux install USB media, both verified working on other systems.

So, am I simply SOL here? Or might there be some fiddling in the CBS menu or other advanced options whereby I might be able to get this thing going?

Thanks in advance for any thoughts!

This topic was automatically closed 273 days after the last reply. New replies are no longer allowed.