So far I got a WD Green Caviar going at 68150hrs ~ 7.77yrs
— Rules —
— Cannot be a commercially deployed drive —
— Must be spinning rust —
Weighing in at 75101hrs, the reiging & defending champ is @ChuckH
So far I got a WD Green Caviar going at 68150hrs ~ 7.77yrs
— Rules —
— Cannot be a commercially deployed drive —
— Must be spinning rust —
Weighing in at 75101hrs, the reiging & defending champ is @ChuckH
You got me beat.
The oldest drive I still have in service is a 2TB Samsung Spinpoint with 58228 hours.
Model Family: Seagate Barracuda 7200.10
Device Model: ST3320620AS
...
9 Power_On_Hours -O--CK 017 017 000 - 73481
Drive from back when Seagate was king.
Model Family: Western Digital Raptor
Device Model: WDC WD740ADFD-00NLR1
...
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
9 Power_On_Hours 0x0032 001 001 000 Old_age Always - 78101
still as loud as when it was new…
I’ve got a windows server at the school with ~13 years power-on time on the array (24 disk shelf, mostly original disks). Next time I go there, I’ll pull the smart data.
Until then, don’t count me.
I have some old university pool computer disks with 38000h power on hours and about 200 power cycles or something.
what was your command for that specific output? Can it list multiple drives?
sudo smartctl --all /dev/sda
It outputs all the smart data, I trimmed it to the hours and mfg/model.
I’m not sure if there is a way to do multiple drives at once. I just check all the ones I have and that was the highest by far. I’m not even sure when I bought that drive, but it was the first HDD I bought new.