Can I use only one SFP+ connector of a QSFP to 4xSFP+ Cable

Hi, I was looking for Intel X710 and saw that Intel XL710 are not that more expansive, but I currently only have one SFP+ port alliable, so my Question is, that if I use QSFP to 4xSFP+ (like: https://www.fs.com/de/products/74649.html?attribute=9518&id=2408956) and then only use one of the four SFP+ connector, would it still work, yes only 10G but that’s enough for me, but would allow me to upgrade to a higher speed when I buy a switch with more SFP+ ports.

Adit only the 100G/25G variant of the cable would it make problems if I used that? (Generisch Kompatibles 100G QSFP28 auf 4x25G SFP28 passives Kupfer Breakout Direct Attach Kabel (DAC), 1m (3ft) - FS.com Deutschland) As it is not that much more expansive.

For reference the NIC would be installed in to a Truenas PC, and on the other side a UDM-Pro-Max would be used.

Yes you can.

2 Likes

Ok thanks, the same would most likely be with these 55874-B21 HPE MELLANOX QSFP AUF SFP+ ADAPTER ( 655874-B21 HPE MELLANOX QSFP TO SFP+ ADAPTER - | eBay )?

Just to jump on this as well @Dutch_Master, you are saying it is possible to have the QSFP connector on the NIC side (which accepts 40G/100G depending on the NIC) and if one has a switch that is only capable of 10G at the moment, it works?

Yes, it’s in the name: QSFP means quad SFP, so that’s 4 parallel SFP+ connections technically.

You can on SOME switches. Mikrotik supports this feature but not every switch does. Compatibility like this is not universal. While Dutch_Master is correct that QSFP literally stands for quad SFP+, the firmware bonds the connections together as a single connection and the firmware must support running them un-bonded as well or it wont work.

The Intel XL710 does support this feature but you must use the Intel EPCT utility to configure 4x10 mode first.

4 Likes

Just to add for anyone who stumbles across this later…

Only a small handful of NICs support 40Gb to 4x10Gb breakout. The XL710 indeed is one of them. Otherwise 4x10 breakout is generally a switch thing…

2 Likes