GTX 1650 received! The super short variant. A Dell OEM
Did a quick test and everything worked fine. Finally I went for a R42NL for the riser as the physical 4x slot meant easier to fit with less chance of interference.
So installed it in a temporary-ish manner. Plastic part removed from the Gamecube during the initial modding was used to secured the GPU. Only screwed at the front has the PCI-E riser, being bent to fit, prop the back of the card up. Right now there is no issue, but might one to have also an attach point at the back so the card stay put whenever the PC will be moved.
Had to move the exhaust fan to the corner so it doesn’t interfere with with the PCI-E riser.
The wires fit inside, but at one point I will shorten them. Might do it if I get a RTX 3050, will depend how the card is made and if there would super short variants.
Everything closes and fits.
However the fans cases are still not connected, will maybe do that during the week because need to solder wires for that.