Hi Guys,
I have finished a couple month ago my build but never got able to use the usb4 port of my ASUS WRX 90 Sage.
Here is the list of my hardware :
SilverStone SST-RM61-312
Asus Pro WS WRX90E-SAGE SE
AMD Threadripper 7975WX
8 X Kingston Server Premier 64GB 5600MT/s KSM56R46BD4PMI-64HAI / 512GB
IceGiant ProSiphon Elite
4 X 4To Samsung nvme 990 Pro
RTX 3090 + AMD 5600XT
lsi 9300-16i
I am running Proxmox with multiple LXC and VM’s, however I cannot seem to get usb4 working, I have checked kernel logs and getting this errors.
“xhci_hcd 0000:8c:00.0: init 0000:8c:00.0 fail, -110”
“xhci_hcd: probe of 0000:8c:00.0 failed with error -110”
I also get a yellow mark on windows 11 device manager when I boot from my windows nvme drive so not only a proxmox - linux issue. I suspect a hardware issue or a bios configuration trick.
My main goal is to use an optic TB3 cable and run my Gaming VM to my office and rack mount this workstation.
Thanks for your help
1 Like
root@pve:~# dmesg | grep -i 0000:8d:00.0
[ 14.920372] pci 0000:8d:00.0: [1b21:2425] type 00 class 0x0c0340 PCIe Legacy Endpoint
[ 14.920384] pci 0000:8d:00.0: BAR 0 [mem 0xb0400000-0xb043ffff 64bit]
[ 14.920391] pci 0000:8d:00.0: BAR 2 [mem 0xb0440000-0xb044ffff 64bit]
[ 14.920452] pci 0000:8d:00.0: PME# supported from D0 D3hot D3cold
[ 20.424165] pci 0000:8d:00.0: Adding to iommu group 61
[ 21.113333] thunderbolt 0000:8d:00.0: enabling device (0000 → 0002)
[ 38.393306] thunderbolt: probe of 0000:8d:00.0 failed with error -110
root@pve:~# dmesg | grep -i 0000:8c:00.0
[ 14.920127] pci 0000:8c:00.0: [1b21:2424] type 00 class 0x0c0330 PCIe Legacy Endpoint
[ 14.920141] pci 0000:8c:00.0: BAR 0 [mem 0xb0000000-0xb0007fff 64bit]
[ 14.920216] pci 0000:8c:00.0: PME# supported from D0 D3hot D3cold
[ 20.415961] pci 0000:8c:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x801
[ 20.416073] pci 0000:8c:00.0: quirk_usb_early_handoff+0x0/0x780 took 5277959 usecs
[ 20.424159] pci 0000:8c:00.0: Adding to iommu group 60
[ 21.120100] xhci_hcd 0000:8c:00.0: xHCI Host Controller
[ 21.120104] xhci_hcd 0000:8c:00.0: new USB bus registered, assigned bus number 5
[ 38.292861] xhci_hcd 0000:8c:00.0: can’t setup: -110
[ 38.292900] xhci_hcd 0000:8c:00.0: USB bus 5 deregistered
[ 38.293179] xhci_hcd 0000:8c:00.0: init 0000:8c:00.0 fail, -110
[ 38.293182] xhci_hcd: probe of 0000:8c:00.0 failed with error -110
root@pve:~#
1 Like