Hi, I’m planning to build a budget AMD desktop PC that uses Linux, mostly for video streaming (no gaming) using OBS, video editing (kdenlive) and image processing (gimp, krita, etc).
I was thinking on buying an AMD Ryzen 8600G CPU (so I can upgrade it in the future) which has an integrated RDNA3 760m GPU, or an alternative CPU with a 780m gpu. Is this a good CPU+gpu combo for these tasks? Or should I get a dedicated GPU, or an intel processor? I saw in Phoronix that these AMD processors have good performance. I don’t know much about encoding, so I’m not sure if this CPU is good for making videos in Linux.
I was also considering on getting a cheap Arc A380 but it seems it’s getting old these days. I don’t need a performant GPU, Radeons and NVidias are around 300 usd or above in my country which is quite expensive for what I want to build.
Ideally you’d want hardware encoding for steaming so your cpu can do other things
I found this (Hardware Encoding | OBS) but it seems a bit out of date? The obs amd encoding project looks to be deprecated and I don’t see it available on my machine
Thanks for the suggestions. I’m targeting about 500 or 600 USD, for a fresh build. I’ll check what other CPUs are available. The 8600G are around 230 usd here.
Do Intel ARCs have hardware encoding? I was trying to avoid nvidias for their linux drivers, and are also very expensive these days.
Considerations:
If you intend to create lectures or “power point style” voice-overs, then any CPU from the last 8 years will do fine.
Simple animations and light editing (for example digitizing the families VHS collection) need some more RAM in order to not become frustrating.
As soon as you enter 4k-resolution or start creating complex animations:
Even if it is “just editing” a video and suddenly you need another graphic, you need RAM, minimum 32GB, preferably more.
1080p60 it will do fine
4k30 may struggle with certain effects
4k60 will be painful to use
Encoding, unless doing a lot of it (= daily), you can just leave it to run over night. Editing and timeline behaviour is where the annoyances come in.
Depends on what you want to do. Without my Nvidia GPU handling denoising-effects in CUDA, I got 3 (three, III) FPS when handling 4k30 raw footage. (System was a 5800x + 5700xt, 32GB RAM)
My new Machine is a beast that does the same at 60FPS.
If you are a tinker, AMD gpu could work for your purpose.
If you want set and go without tinkering, get a NVidia card, even Intel Arc. They works better with all production softwares.
At least in Fedora 40, it was easier to get Resolve Studio to recognize my 7900xt than it was to get the RTX 4000 to show up and actually do something.
One of main advantage(s) behind using a dGPU, is letting off the CPU and system memory
The Arc series GPUs were first of heap, in hosting AV1 file support
While A380 isn’t THAT power hungry – may still need a PCIe wire connection [pending vendor]
Thanks for all the comments. I think it’s best to get a dGPU then. I read that a ryzen 5 7600 is a good cpu option, and I’m thinking on getting an intel A380 (is more power efficient) or 580 GPU, as I read they have good features like AV1 encoding. Nvidia and AMD cards (even used) are very expensive these days where I live (above 300 usd more or less). Also, I need the system works without much tinkering, as I’m building it for someone else.