So I am using the Phanteks Enthoo Pro.
I was curious about the air flow and if there's a better way of doing it.
The 200mm intake
140mm rear exhaust
and my h100i mounted to the top as a push exhaust out the top.
I have an Asus r9 290 aaaand that's about it!
Thanks Guys!
That's the best way, unless you want to do some modding and put the h100i in the front, and then 2 for top exhaust.
As of right now I would say you have negative pressure, which will accumulate dust faster than if you had neutral or positive case pressure. I would try to mount the 140mm elsewhere as an intake to achieve a more balanced pressure. Or just remove the 140mm all together and just have to 200 intake and h100i as outake
Okay what if rather than move the 140, I add a bottom Mount intake which I believe is a 140 but I'd have to check and see again
The 200mm requires no modding to be placed in the top. I have the case, can confirm that the 200mm can fit just fine in the top no modding required
that would be best. just dont buy a fan thats less than $10. i bought 4 cheap fans and they all had bad bearings within a year and a half, and one went before 6 months.
Out of curiosity, Shouldn't more exhaust fans cause LESS dust? Since the air is being pushed outside the case?
