Advice on building a quiet NAS using NVMe and bifurcation.

After refining the workflows I plan to use, I see limited advantages in actively editing directly on a NAS, except for the redundancy it offers and the lower local storage requirements. However, I’m still exploring options to integrate a NAS workflow effectively. I do not want to pay Apple or Dell for 2tb of laptop storage.

I have not yet excluded Epyc as an option.

I found that Pudget Systems recommends “about 4x the bitrate of your media”. That would give me a need of only 170mb/s (340 Mbps Canon R6 mark II) or 1gb/s for heavy RAW video. That is If I can figure out the workflow that uses a NAS with Resolve. For 20 drives, the total potential PCIe bandwidth would be 160 GB/s (PCIe 4.0). DDR4-3200 with dual channels offers around 51.2 GB/s. While DDR4-3200 8 channel is 204.8 GB/s. I am unsure about what this all means. But this might be a none issue, or a problem for future me to resolve.

Will go that path, seems silly that I worry about spending 30 dollars more on adapter once the whole system cost is considered.

When I built my former overclocked Haswell gaming PC the Noctua cooler was quiet. While the WD Blue 1TB was audible. Should I reconsider my fobia of HDD?

I planned to use Noctua SP3 cooler with some Artic P12 to keep the chassi cool. Other than coil whine I do not see how AMD Epic would be worse then any other PC. Do I miss something?

1 Like