In bios, usually under advanced>AMD Overclocking PBO/Precision boost over drive
Set to advanced
Set power limit to motherboard
If you prefer is single/few core boost speed
Set frequency override to +200mhz
Set curve optimizer for CPU to -6
Test extensively
Raise that value by 2 each time
You might get up to -16 but probably not much further than that
This raises your max single/few core boost
So test with single/few core loads
If you rather maximize your all core freq vs single
Set freq override to -200mhz~500mhz
Set CPU curve optimizer to -10
And do both all core and single/few core loads and raise by 2 on Curve
The reason you lower the max boost for all core is
The single core bins are like 600mhz faster than all core
Your single core boost might get unstable while you still have headroom on all core
The frequency override will affect single core boost first
So closing the gap between single and all core boost bins raises your overall headroom
Example -14 curve might work at 4.3ghz, but your single wants to boost off a cliff to 4.8ghz
-500mhz brings the single core back down to stable
By the way there is no possible way to fuck up the CPU with this method as it involves undervolting, worst thing to happen is a bios rest or MAYBE a OS reinstall
But both are the norm for OC
Also, do note that OCins is mostly dead these days because Intel and AMD bin their CPUs too much and the margin for overclock is so narrow that the headache you get from the OC is usually not worth the stability issues and the single digit performance you get (usually).
These days sadly, the answer to getting the most of out of CPUs and GPUs is to buy the higher tier model.
weres that setting is the the one below the CPU curve optimizer
that is called manual cpu oc
with the manual gpu oc below it an were it says custom pstates o
whats the diff between id 19 & 20 i have no idea what either is
id like some help understanding all the setting under the advanced tab in my
aorus b450m its got the latest bios update an is now running with a 5600g & 6700xt
if its possible to run with the 6700xt as the dedicated gpu but still have to igpu enabled , if not ok but id like to know for this mobo an cpu an gpu combo what all the
settings an options do an mean as ther not all in the Manuel ,do any of the Manuel amd gpu overclocking setting effect my 6700xt from the mobo
an how do i sett the infinity fab setting for my cpu an ram
this is my current gear setup while im working on my 12core build
You can do the other stuff as well it’s a bit late in the night at the office and I have an ASRock board here, I’ll get on a gigabyte board and walk you through the bios