Tp-Link Omada upgraded the entire property to Wifi 7 a few months ago. We were getting 1.2gigabit off of our LAN speed test server on 5Ghz, in my oldest daughters room when I tested. So i was very surprised the last week when she was saying “The wifi is ass”. She also mentions her gamepad isn’t working anymore. Last night I am downloading games for her. I notice steam is at 70 megabit and peaked at 100. I turned on the gamepad she was complaining about, it acted as though it paired with dongle and the indicator lit up, but the PC didn’t detect it. Steam then dropped to 14 megabit. Unplugged the dongle, and the download speed immediately jumped to 525 megabit (starlink max). Plug the controller in with a cable and it works wired, and her internet is back to full speed. So I would assume since it all worked for months the dongle failed so spectacularly, it was causing massive wireless interference.
I used to have one of those. Guess I’m glad I don’t now.
Wait, arent wireless peripherals supposed to stay on 2.4ghz. How is that interfering with 5ghz wifi. Are those “mesh” stations using 2.4ghz for backhaul in some way
Tp-link 5x Omada Wi-Fi 7 Acess points, all of them are hard wired none are mesh. Wireless back haul between buildings is done with 5GHz point to point bridges kits they sent me not APs. Its not a mesh kit, it’s a full Omada stack with managed POE switches, Their firewall and hardware controller. Full Omada SDN in my entire network stack. (Omada is their Unifi knock off clone, Deco is their home mesh system)
As far as why it is causing interference I don’t know. On her computer I have 2.5 disabled so it only uses 5 and 6 gigahertz, but when you remove the dongle it works full speed. This is also a malfunctioning because the other five identical controllers we have don’t have this issue. The dongle just died and is bleeding interference somehow.
Omada ecosystem has “mesh” too (or more appropriately, APs that can run in “mesh” mode as well) Omada Mesh Devices hence my question.
But anyway since there is no 2.4ghz at all in your setup, this thing really failed in a way to jam 5Ghz from a supposedly 2.4ghz radio.
Yea, and I wasn’t trying to be snarky when the reply. I just can never tell with this forum where on the tech level anyone is here anymore and the Deco mesh stuff is very popular and on the shelvs everywhere.
But yea, it’s definitely causing issues, and they are repeatable by plugging it in. I am just glad the controller works wired. The older two have suddenly been rough in mice and keyboards, I didn’t want to spend $50 on another controller.
I had also taken her calling the Wifi “ass” as an insult after all i went through. They decided to debut new outdoor APs in winter so I did allot of the work outside at -15f. Then she has the nerve to call it ass lol. Now she can’t complain.
Curious if plugging it into another PC nearby would cause the same speed loss on your daughter’s PC - is it actually spewing RF interference or is it just doing something janky to the host system (maybe spewing all over the USB controller)
I’m pretty sure my phone in the same room saw some performer hit her room too which made me curious to begin with. But now I want to find where I stuck it this morning and run it through wifi analyzer, see if channel health drops when it’s plugged in, and see what the USB bus probes say when it’s plugged in.
It wouldnt be a huge shock if a Chinese product didn’t conform to UL or CE specifications. In fact it doesn’t surprise me at all given the price disparity between this any official option from Sony or MSFT… could be that’s where they’re saving the money.