3D Workstation/Render PC Build

[arran199]

Hi all,

I’ve done a fair bit on research and am looking on getting a new workstation for 3D/adobe applications and a lot of GPU heavy 3D rendering and wanted to show you guys.

I know stock is very limited currently but just thinking about future expandability, is a 30xx 3/4 gpu set up even possible here? Guessing i’d need dual slot width/blower gpus right? And a bigger psu?

COOLERMASTER MASTERBOX NR600P MID TOWER CASE

AMD Ryzen Threadripper PRO 3955WX 16 Core CPU (3.9GHz - 4.3GHz, 72MB CACHE)

ASUS® Pro WS WRX80E-SAGE SE WIFI (Intel dual 10 G LAN, USB 3.2 Gen 2x2 Type-C port, SLI) (Pre-Order Only)

128GB Kingston DDR4 3200MHz ECC Registered (8 x 16GB)

Graphics Card - NONE, I ALREADY HAVE A GRAPHICS CARD

1TB SAMSUNG 980 PRO M.2, PCIe NVMe (up to 7000MB/R, 5000MB/W)

CORSAIR 1600W PRO SERIES™ TITANIUM AX1600i DIGITAL MODULAR PSU

1 x 1 Metre IEC C19 UK Power Cable

PCS FrostFlow 200 TR4 Series High Performance CPU Cooler

STANDARD THERMAL PASTE FOR SUFFICIENT COOLING

ONBOARD 6 CHANNEL (5.1) HIGH DEF AUDIO (AS STANDARD)

2 x 10 GIGABIT ETHERNET PORTS

WIRELESS INTEL® Wi-Fi 6 AX200 (2.4 Gbps) + BT 5.0

MIN. 2 x USB 3.0 & 2 x USB 2.0 PORTS @ BACK PANEL + MIN. 2 FRONT PORTS

NO OPERATING SYSTEM REQUIRED

–

If anyone gets a brief chance to look at this is there any concerns with compatibilty here?

Thanks all!

[GigaBusterEXE]

Can you link your cooler choice?

[arran199]

Hey Giga,

it’s PCSpecialists cooler - image below

‘The PCS FrostFlow 200 is a twin tower cooler and features 7 heat pipes and two 120mm PWM fans (1300RPM and 700-1800RPM)’

It’s actually the only one I can choose for the build.

[GigaBusterEXE]

I’ll have to look it up, but you might want to replace the fans, 1800 for 120mm kinda low speed for hedt

[arran199]

@GigaBusterEXE thankyou sm. Ill look into that.
Is a multi-gpu set up possible here also? I worry about temp and size of case

[arran199]

Guess I could need a few extra case fans too