[ 0.000000] Linux version 4.16.3-1-ARCH (builduser@heftig-2067) (gcc version 7.3.1 20180406 (GCC)) #1 SMP PREEMPT Thu Apr 19 09:17:56 UTC 2018 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=4504ba0a-c834-4d7e-92b8-a2908b60494d rw quiet [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000000400a000-0x0000000009cfffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000009d00000-0x0000000009ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000daeb6fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000daeb7000-0x00000000dc3bafff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dc3bb000-0x00000000dc4b0fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dc4b1000-0x00000000dc88dfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dc88e000-0x00000000dd284fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dd285000-0x00000000dd317fff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000dd318000-0x00000000deffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd800000-0x00000000fdffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000081f37ffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.60 by American Megatrends [ 0.000000] efi: ACPI 2.0=0xdc4b1000 ACPI=0xdc4b1000 SMBIOS=0xf05e0 SMBIOS 3.0=0xf0600 ESRT=0xd93fe898 MEMATTR=0xd8a5e018 [ 0.000000] random: fast init done [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./AB350 Pro4, BIOS P4.70 02/12/2018 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x81f380 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF write-through [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000820000000 aka 33280M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000 [ 0.000000] esrt: Reserving ESRT space from 0x00000000d93fe898 to 0x00000000d93fe8d0. [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 96000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x1ea64a000, 0x1ea64afff] PGTABLE [ 0.000000] BRK [0x1ea64b000, 0x1ea64bfff] PGTABLE [ 0.000000] BRK [0x1ea64c000, 0x1ea64cfff] PGTABLE [ 0.000000] BRK [0x1ea64d000, 0x1ea64dfff] PGTABLE [ 0.000000] BRK [0x1ea64e000, 0x1ea64efff] PGTABLE [ 0.000000] BRK [0x1ea64f000, 0x1ea64ffff] PGTABLE [ 0.000000] BRK [0x1ea650000, 0x1ea650fff] PGTABLE [ 0.000000] BRK [0x1ea651000, 0x1ea651fff] PGTABLE [ 0.000000] BRK [0x1ea652000, 0x1ea652fff] PGTABLE [ 0.000000] BRK [0x1ea653000, 0x1ea653fff] PGTABLE [ 0.000000] BRK [0x1ea654000, 0x1ea654fff] PGTABLE [ 0.000000] BRK [0x1ea655000, 0x1ea655fff] PGTABLE [ 0.000000] Secure boot could not be determined [ 0.000000] RAMDISK: [mem 0x37233000-0x37910fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000DC4B1000 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000DC4B10A0 0000BC (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DC4B79A8 000114 (v06 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180105/tbfadt-658) [ 0.000000] ACPI: DSDT 0x00000000DC4B11F0 0067B4 (v02 ALASKA A M I 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x00000000DC876E00 000040 [ 0.000000] ACPI: APIC 0x00000000DC4B7AC0 0000DE (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000DC4B7BA0 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x00000000DC4B7BE8 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000DC4B7C88 008C98 (v02 AMD AMD ALIB 00000002 MSFT 04000000) [ 0.000000] ACPI: SSDT 0x00000000DC4C0920 002314 (v01 AMD AMD CPU 00000001 AMD 00000001) [ 0.000000] ACPI: CRAT 0x00000000DC4C2C38 000F50 (v01 AMD AMD CRAT 00000001 AMD 00000001) [ 0.000000] ACPI: CDIT 0x00000000DC4C3B88 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 0x00000000DC4C3BB8 002CDC (v01 AMD AMD AOD 00000001 INTL 20120913) [ 0.000000] ACPI: MCFG 0x00000000DC4C6898 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: AAFT 0x00000000DC4C68D8 000294 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000DC4C6B70 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.000000] ACPI: SSDT 0x00000000DC4C6BA8 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913) [ 0.000000] ACPI: UEFI 0x00000000DC4C6BD0 000042 (v01 00000000 00000000) [ 0.000000] ACPI: IVRS 0x00000000DC4C6C18 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000) [ 0.000000] ACPI: BGRT 0x00000000DC4C6CE8 000038 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000DC4C6D20 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DC4C6E18 001A41 (v01 AMD AmdTable 00000001 INTL 20120913) [ 0.000000] ACPI: WSMT 0x00000000DC4C8860 000028 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000081f37ffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x81f37d000-0x81f37ffff] [ 0.000000] tsc: Fast TSC calibration failed [ 0.000000] tsc: Using PIT calibration value [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000081f37ffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000003ffffff] [ 0.000000] node 0: [mem 0x000000000400a000-0x0000000009cfffff] [ 0.000000] node 0: [mem 0x000000000a000000-0x000000000affffff] [ 0.000000] node 0: [mem 0x000000000b020000-0x00000000daeb6fff] [ 0.000000] node 0: [mem 0x00000000dc3bb000-0x00000000dc4b0fff] [ 0.000000] node 0: [mem 0x00000000dd318000-0x00000000deffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000081f37ffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000081f37ffff] [ 0.000000] On node 0 totalpages: 8371338 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 27 pages reserved [ 0.000000] DMA zone: 3999 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14054 pages used for memmap [ 0.000000] DMA32 zone: 899435 pages, LIFO batch:31 [ 0.000000] Normal zone: 116686 pages used for memmap [ 0.000000] Normal zone: 7467904 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 97 pages [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 16 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x04000000-0x04009fff] [ 0.000000] PM: Registered nosave memory: [mem 0x09d00000-0x09ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaeb7000-0xdc3bafff] [ 0.000000] PM: Registered nosave memory: [mem 0xdc4b1000-0xdc88dfff] [ 0.000000] PM: Registered nosave memory: [mem 0xdc88e000-0xdd284fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd285000-0xdd317fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfd7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfd800000-0xfdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:16 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 8240507 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=4504ba0a-c834-4d7e-92b8-a2908b60494d rw quiet [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 32806448K/33485352K available (10252K kernel code, 1263K rwdata, 3372K rodata, 1452K init, 632K bss, 678904K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.000000] ftrace: allocating 31747 entries in 125 pages [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=16. [ 0.000000] RCU priority boosting: priority 1 delay 500 ms. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16 [ 0.000000] NR_IRQS: 20736, nr_irqs: 1096, preallocated irqs: 16 [ 0.000000] Offload RCU callbacks from CPUs: . [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20180105 [ 0.000000] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.003333] Switched APIC routing to physical flat. [ 0.003333] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.019999] tsc: Fast TSC calibration failed [ 0.026666] tsc: PIT calibration matches HPET. 1 loops [ 0.026666] tsc: Detected 2993.962 MHz processor [ 0.026666] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2b27fd42f6e, max_idle_ns: 440795240346 ns [ 0.026666] Calibrating delay loop (skipped), value calculated using timer frequency.. 5990.42 BogoMIPS (lpj=9979873) [ 0.026666] pid_max: default: 32768 minimum: 301 [ 0.030039] Security Framework initialized [ 0.030039] Yama: becoming mindful. [ 0.034638] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.037252] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.037347] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.037418] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.037626] CPU: Physical Processor ID: 0 [ 0.037627] CPU: Processor Core ID: 0 [ 0.037634] mce: CPU supports 23 MCE banks [ 0.037652] LVT offset 1 assigned for vector 0xf9 [ 0.037726] LVT offset 2 assigned for vector 0xf4 [ 0.037738] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512 [ 0.037739] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0 [ 0.037740] Spectre V2 : Mitigation: Full AMD retpoline [ 0.037740] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier [ 0.038484] Freeing SMP alternatives memory: 24K [ 0.043333] smpboot: CPU0: AMD Ryzen 7 1700 Eight-Core Processor (family: 0x17, model: 0x1, stepping: 0x1) [ 0.053357] Performance Events: Fam17h core perfctr, AMD PMU driver. [ 0.053364] ... version: 0 [ 0.053364] ... bit width: 48 [ 0.053365] ... generic registers: 6 [ 0.053366] ... value mask: 0000ffffffffffff [ 0.053366] ... max period: 00007fffffffffff [ 0.053367] ... fixed-purpose events: 0 [ 0.053367] ... event mask: 000000000000003f [ 0.060014] Hierarchical SRCU implementation. [ 0.080144] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.086680] smp: Bringing up secondary CPUs ... [ 0.116700] x86: Booting SMP configuration: [ 0.116702] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 [ 0.538981] smp: Brought up 1 node, 16 CPUs [ 0.538981] smpboot: Max logical packages: 1 [ 0.538981] smpboot: Total of 16 processors activated (95845.73 BogoMIPS) [ 0.540893] devtmpfs: initialized [ 0.540893] x86/mm: Memory block size: 128MB [ 0.541833] PM: Registering ACPI NVS region [mem 0x04000000-0x04009fff] (40960 bytes) [ 0.541833] PM: Registering ACPI NVS region [mem 0xdc4b1000-0xdc88dfff] (4050944 bytes) [ 0.541833] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.541833] futex hash table entries: 4096 (order: 6, 262144 bytes) [ 0.543347] pinctrl core: initialized pinctrl subsystem [ 0.543446] RTC time: 19:12:23, date: 04/23/18 [ 0.545025] NET: Registered protocol family 16 [ 0.545145] cpuidle: using governor ladder [ 0.545145] cpuidle: using governor menu [ 0.545145] ACPI: bus type PCI registered [ 0.545145] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.545145] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.545145] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.545145] PCI: Using configuration type 1 for base access [ 0.546719] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.546719] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.546796] ACPI: Added _OSI(Module Device) [ 0.546797] ACPI: Added _OSI(Processor Device) [ 0.546798] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.546798] ACPI: Added _OSI(Processor Aggregator Device) [ 0.546975] ACPI: Executed 2 blocks of module-level executable AML code [ 0.553964] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.557471] ACPI: Interpreter enabled [ 0.557486] ACPI: (supports S0 S3 S4 S5) [ 0.557486] ACPI: Using IOAPIC for interrupt routing [ 0.557813] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.558105] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.567476] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.567480] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.567750] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.567761] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.568140] PCI host bridge to bus 0000:00 [ 0.568143] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.568144] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.568145] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.568146] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.568147] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.568148] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.568149] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window] [ 0.568151] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window] [ 0.568152] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.568158] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000 [ 0.568244] pci 0000:00:00.2: [1022:1451] type 00 class 0x080600 [ 0.568345] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000 [ 0.568419] pci 0000:00:01.1: [1022:1453] type 01 class 0x060400 [ 0.568664] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.568752] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400 [ 0.568854] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold [ 0.568945] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000 [ 0.569036] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000 [ 0.569113] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400 [ 0.569549] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold [ 0.569633] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000 [ 0.569716] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000 [ 0.569779] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400 [ 0.569806] pci 0000:00:07.1: enabling Extended Tags [ 0.569879] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold [ 0.570080] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000 [ 0.570152] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400 [ 0.570471] pci 0000:00:08.1: enabling Extended Tags [ 0.570546] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold [ 0.570672] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 [ 0.570893] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 [ 0.571118] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000 [ 0.571179] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000 [ 0.571241] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000 [ 0.571303] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000 [ 0.571364] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000 [ 0.571425] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000 [ 0.571489] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000 [ 0.571555] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000 [ 0.571700] pci 0000:01:00.0: [15b7:5001] type 00 class 0x010802 [ 0.571722] pci 0000:01:00.0: reg 0x10: [mem 0xfe900000-0xfe903fff 64bit] [ 0.583374] pci 0000:00:01.1: PCI bridge to [bus 01] [ 0.583381] pci 0000:00:01.1: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.583701] pci 0000:03:00.0: [1022:43bb] type 00 class 0x0c0330 [ 0.583725] pci 0000:03:00.0: reg 0x10: [mem 0xfe3a0000-0xfe3a7fff 64bit] [ 0.583810] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 0.583900] pci 0000:03:00.1: [1022:43b7] type 00 class 0x010601 [ 0.583948] pci 0000:03:00.1: reg 0x24: [mem 0xfe380000-0xfe39ffff] [ 0.583956] pci 0000:03:00.1: reg 0x30: [mem 0xfe300000-0xfe37ffff pref] [ 0.583995] pci 0000:03:00.1: PME# supported from D3hot D3cold [ 0.584045] pci 0000:03:00.2: [1022:43b2] type 01 class 0x060400 [ 0.584118] pci 0000:03:00.2: PME# supported from D3hot D3cold [ 0.596706] pci 0000:00:01.3: PCI bridge to [bus 03-25] [ 0.596711] pci 0000:00:01.3: bridge window [io 0xc000-0xefff] [ 0.596714] pci 0000:00:01.3: bridge window [mem 0xfe000000-0xfe3fffff] [ 0.596717] pci 0000:00:01.3: bridge window [mem 0xf0300000-0xf04fffff 64bit pref] [ 0.596881] pci 0000:1d:00.0: [1022:43b4] type 01 class 0x060400 [ 0.596979] pci 0000:1d:00.0: PME# supported from D3hot D3cold [ 0.597067] pci 0000:1d:01.0: [1022:43b4] type 01 class 0x060400 [ 0.597155] pci 0000:1d:01.0: PME# supported from D3hot D3cold [ 0.597238] pci 0000:1d:04.0: [1022:43b4] type 01 class 0x060400 [ 0.597326] pci 0000:1d:04.0: PME# supported from D3hot D3cold [ 0.597394] pci 0000:1d:05.0: [1022:43b4] type 01 class 0x060400 [ 0.597479] pci 0000:1d:05.0: PME# supported from D3hot D3cold [ 0.597548] pci 0000:1d:06.0: [1022:43b4] type 01 class 0x060400 [ 0.597633] pci 0000:1d:06.0: PME# supported from D3hot D3cold [ 0.597703] pci 0000:1d:07.0: [1022:43b4] type 01 class 0x060400 [ 0.597787] pci 0000:1d:07.0: PME# supported from D3hot D3cold [ 0.597865] pci 0000:03:00.2: PCI bridge to [bus 1d-25] [ 0.597870] pci 0000:03:00.2: bridge window [io 0xc000-0xefff] [ 0.597872] pci 0000:03:00.2: bridge window [mem 0xfe000000-0xfe2fffff] [ 0.597877] pci 0000:03:00.2: bridge window [mem 0xf0300000-0xf04fffff 64bit pref] [ 0.597909] pci 0000:1d:00.0: PCI bridge to [bus 1e] [ 0.597970] pci 0000:1f:00.0: [10ec:8168] type 00 class 0x020000 [ 0.598007] pci 0000:1f:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.598043] pci 0000:1f:00.0: reg 0x18: [mem 0xfe200000-0xfe200fff 64bit] [ 0.598065] pci 0000:1f:00.0: reg 0x20: [mem 0xf0400000-0xf0403fff 64bit pref] [ 0.598189] pci 0000:1f:00.0: supports D1 D2 [ 0.598190] pci 0000:1f:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.610047] pci 0000:1d:01.0: PCI bridge to [bus 1f] [ 0.610055] pci 0000:1d:01.0: bridge window [io 0xe000-0xefff] [ 0.610058] pci 0000:1d:01.0: bridge window [mem 0xfe200000-0xfe2fffff] [ 0.610063] pci 0000:1d:01.0: bridge window [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.610152] pci 0000:1d:04.0: PCI bridge to [bus 22] [ 0.610200] pci 0000:1d:05.0: PCI bridge to [bus 23] [ 0.610262] pci 0000:24:00.0: [1b21:0612] type 00 class 0x010601 [ 0.610292] pci 0000:24:00.0: reg 0x10: [io 0xd050-0xd057] [ 0.610305] pci 0000:24:00.0: reg 0x14: [io 0xd040-0xd043] [ 0.610317] pci 0000:24:00.0: reg 0x18: [io 0xd030-0xd037] [ 0.610329] pci 0000:24:00.0: reg 0x1c: [io 0xd020-0xd023] [ 0.610342] pci 0000:24:00.0: reg 0x20: [io 0xd000-0xd01f] [ 0.610354] pci 0000:24:00.0: reg 0x24: [mem 0xfe100000-0xfe1001ff] [ 0.620042] pci 0000:1d:06.0: PCI bridge to [bus 24] [ 0.620050] pci 0000:1d:06.0: bridge window [io 0xd000-0xdfff] [ 0.620053] pci 0000:1d:06.0: bridge window [mem 0xfe100000-0xfe1fffff] [ 0.620150] pci 0000:25:00.0: [10ec:8168] type 00 class 0x020000 [ 0.620191] pci 0000:25:00.0: reg 0x10: [io 0xc000-0xc0ff] [ 0.620227] pci 0000:25:00.0: reg 0x18: [mem 0xfe000000-0xfe000fff 64bit] [ 0.620250] pci 0000:25:00.0: reg 0x20: [mem 0xf0300000-0xf0303fff 64bit pref] [ 0.620393] pci 0000:25:00.0: supports D1 D2 [ 0.620395] pci 0000:25:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.630049] pci 0000:1d:07.0: PCI bridge to [bus 25] [ 0.630057] pci 0000:1d:07.0: bridge window [io 0xc000-0xcfff] [ 0.630061] pci 0000:1d:07.0: bridge window [mem 0xfe000000-0xfe0fffff] [ 0.630066] pci 0000:1d:07.0: bridge window [mem 0xf0300000-0xf03fffff 64bit pref] [ 0.630529] pci 0000:26:00.0: [1002:67df] type 00 class 0x030000 [ 0.630554] pci 0000:26:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.630564] pci 0000:26:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.630571] pci 0000:26:00.0: reg 0x20: [io 0xf000-0xf0ff] [ 0.630577] pci 0000:26:00.0: reg 0x24: [mem 0xfe800000-0xfe83ffff] [ 0.630584] pci 0000:26:00.0: reg 0x30: [mem 0xfe840000-0xfe85ffff pref] [ 0.630601] pci 0000:26:00.0: BAR 0: assigned to efifb [ 0.630649] pci 0000:26:00.0: supports D1 D2 [ 0.630651] pci 0000:26:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.630741] pci 0000:26:00.1: [1002:aaf0] type 00 class 0x040300 [ 0.630761] pci 0000:26:00.1: reg 0x10: [mem 0xfe860000-0xfe863fff 64bit] [ 0.630831] pci 0000:26:00.1: supports D1 D2 [ 0.643375] pci 0000:00:03.1: PCI bridge to [bus 26] [ 0.643381] pci 0000:00:03.1: bridge window [io 0xf000-0xffff] [ 0.643383] pci 0000:00:03.1: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.643386] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.643875] pci 0000:27:00.0: [1022:145a] type 00 class 0x130000 [ 0.643905] pci 0000:27:00.0: enabling Extended Tags [ 0.643989] pci 0000:27:00.2: [1022:1456] type 00 class 0x108000 [ 0.644004] pci 0000:27:00.2: reg 0x18: [mem 0xfe500000-0xfe5fffff] [ 0.644012] pci 0000:27:00.2: reg 0x24: [mem 0xfe600000-0xfe601fff] [ 0.644018] pci 0000:27:00.2: enabling Extended Tags [ 0.644092] pci 0000:27:00.3: [1022:145c] type 00 class 0x0c0330 [ 0.644105] pci 0000:27:00.3: reg 0x10: [mem 0xfe400000-0xfe4fffff 64bit] [ 0.644125] pci 0000:27:00.3: enabling Extended Tags [ 0.644151] pci 0000:27:00.3: PME# supported from D0 D3hot D3cold [ 0.644211] pci 0000:00:07.1: PCI bridge to [bus 27] [ 0.644215] pci 0000:00:07.1: bridge window [mem 0xfe400000-0xfe6fffff] [ 0.644498] pci 0000:28:00.0: [1022:1455] type 00 class 0x130000 [ 0.644527] pci 0000:28:00.0: enabling Extended Tags [ 0.644600] pci 0000:28:00.2: [1022:7901] type 00 class 0x010601 [ 0.644631] pci 0000:28:00.2: reg 0x24: [mem 0xfe708000-0xfe708fff] [ 0.644639] pci 0000:28:00.2: enabling Extended Tags [ 0.644671] pci 0000:28:00.2: PME# supported from D3hot D3cold [ 0.644728] pci 0000:28:00.3: [1022:1457] type 00 class 0x040300 [ 0.644740] pci 0000:28:00.3: reg 0x10: [mem 0xfe700000-0xfe707fff] [ 0.644761] pci 0000:28:00.3: enabling Extended Tags [ 0.644790] pci 0000:28:00.3: PME# supported from D0 D3hot D3cold [ 0.644849] pci 0000:00:08.1: PCI bridge to [bus 28] [ 0.644853] pci 0000:00:08.1: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.645355] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0 [ 0.645423] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0 [ 0.645481] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0 [ 0.645553] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0 [ 0.645618] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0 [ 0.645672] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0 [ 0.645726] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0 [ 0.645779] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0 [ 0.646681] pci 0000:26:00.0: vgaarb: setting as boot VGA device [ 0.646681] pci 0000:26:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.646681] pci 0000:26:00.0: vgaarb: bridge control possible [ 0.646681] vgaarb: loaded [ 0.646753] EDAC MC: Ver: 3.0.0 [ 0.646849] Registered efivars operations [ 0.660457] PCI: Using ACPI for IRQ routing [ 0.662641] PCI: pci_cache_line_size set to 64 bytes [ 0.662713] e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff] [ 0.662714] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff] [ 0.662715] e820: reserve RAM buffer [mem 0xdaeb7000-0xdbffffff] [ 0.662715] e820: reserve RAM buffer [mem 0xdc4b1000-0xdfffffff] [ 0.662716] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff] [ 0.662716] e820: reserve RAM buffer [mem 0x81f380000-0x81fffffff] [ 0.662785] NetLabel: Initializing [ 0.662785] NetLabel: domain hash size = 128 [ 0.662786] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.662798] NetLabel: unlabeled traffic allowed by default [ 0.663365] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.663367] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.666669] clocksource: Switched to clocksource tsc-early [ 0.675344] VFS: Disk quotas dquot_6.6.0 [ 0.675360] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.675412] pnp: PnP ACPI init [ 0.675529] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.675533] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.675604] system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved [ 0.675606] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.675691] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.675920] system 00:03: [io 0x0280-0x028f] has been reserved [ 0.675921] system 00:03: [io 0x0290-0x029f] has been reserved [ 0.675923] system 00:03: [io 0x02a0-0x02af] has been reserved [ 0.675924] system 00:03: [io 0x02b0-0x02bf] has been reserved [ 0.675928] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.676247] pnp 00:04: [dma 0 disabled] [ 0.676283] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.676559] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.676560] system 00:05: [io 0x040b] has been reserved [ 0.676561] system 00:05: [io 0x04d6] has been reserved [ 0.676564] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.676565] system 00:05: [io 0x0c14] has been reserved [ 0.676566] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.676567] system 00:05: [io 0x0c52] has been reserved [ 0.676568] system 00:05: [io 0x0c6c] has been reserved [ 0.676569] system 00:05: [io 0x0c6f] has been reserved [ 0.676570] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.676571] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.676573] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.676574] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.676575] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.676576] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.676577] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.676578] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.676579] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.676580] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.676582] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.676583] system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved [ 0.676584] system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved [ 0.676586] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.676587] system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved [ 0.676588] system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.676590] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.676593] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.677073] pnp: PnP ACPI: found 6 devices [ 0.682624] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.682688] pci 0000:00:01.1: PCI bridge to [bus 01] [ 0.682691] pci 0000:00:01.1: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.682696] pci 0000:1d:00.0: PCI bridge to [bus 1e] [ 0.682705] pci 0000:1d:01.0: PCI bridge to [bus 1f] [ 0.682708] pci 0000:1d:01.0: bridge window [io 0xe000-0xefff] [ 0.682711] pci 0000:1d:01.0: bridge window [mem 0xfe200000-0xfe2fffff] [ 0.682714] pci 0000:1d:01.0: bridge window [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.682719] pci 0000:1d:04.0: PCI bridge to [bus 22] [ 0.682728] pci 0000:1d:05.0: PCI bridge to [bus 23] [ 0.682738] pci 0000:1d:06.0: PCI bridge to [bus 24] [ 0.682740] pci 0000:1d:06.0: bridge window [io 0xd000-0xdfff] [ 0.682743] pci 0000:1d:06.0: bridge window [mem 0xfe100000-0xfe1fffff] [ 0.682750] pci 0000:1d:07.0: PCI bridge to [bus 25] [ 0.682751] pci 0000:1d:07.0: bridge window [io 0xc000-0xcfff] [ 0.682755] pci 0000:1d:07.0: bridge window [mem 0xfe000000-0xfe0fffff] [ 0.682758] pci 0000:1d:07.0: bridge window [mem 0xf0300000-0xf03fffff 64bit pref] [ 0.682762] pci 0000:03:00.2: PCI bridge to [bus 1d-25] [ 0.682764] pci 0000:03:00.2: bridge window [io 0xc000-0xefff] [ 0.682768] pci 0000:03:00.2: bridge window [mem 0xfe000000-0xfe2fffff] [ 0.682770] pci 0000:03:00.2: bridge window [mem 0xf0300000-0xf04fffff 64bit pref] [ 0.682775] pci 0000:00:01.3: PCI bridge to [bus 03-25] [ 0.682776] pci 0000:00:01.3: bridge window [io 0xc000-0xefff] [ 0.682779] pci 0000:00:01.3: bridge window [mem 0xfe000000-0xfe3fffff] [ 0.682781] pci 0000:00:01.3: bridge window [mem 0xf0300000-0xf04fffff 64bit pref] [ 0.682784] pci 0000:00:03.1: PCI bridge to [bus 26] [ 0.682785] pci 0000:00:03.1: bridge window [io 0xf000-0xffff] [ 0.682787] pci 0000:00:03.1: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.682789] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.682792] pci 0000:00:07.1: PCI bridge to [bus 27] [ 0.682794] pci 0000:00:07.1: bridge window [mem 0xfe400000-0xfe6fffff] [ 0.682798] pci 0000:00:08.1: PCI bridge to [bus 28] [ 0.682801] pci 0000:00:08.1: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.682805] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.682806] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.682807] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.682808] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.682809] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.682811] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.682812] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window] [ 0.682813] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window] [ 0.682814] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.682815] pci_bus 0000:03: resource 0 [io 0xc000-0xefff] [ 0.682816] pci_bus 0000:03: resource 1 [mem 0xfe000000-0xfe3fffff] [ 0.682818] pci_bus 0000:03: resource 2 [mem 0xf0300000-0xf04fffff 64bit pref] [ 0.682819] pci_bus 0000:1d: resource 0 [io 0xc000-0xefff] [ 0.682820] pci_bus 0000:1d: resource 1 [mem 0xfe000000-0xfe2fffff] [ 0.682821] pci_bus 0000:1d: resource 2 [mem 0xf0300000-0xf04fffff 64bit pref] [ 0.682822] pci_bus 0000:1f: resource 0 [io 0xe000-0xefff] [ 0.682823] pci_bus 0000:1f: resource 1 [mem 0xfe200000-0xfe2fffff] [ 0.682824] pci_bus 0000:1f: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.682825] pci_bus 0000:24: resource 0 [io 0xd000-0xdfff] [ 0.682826] pci_bus 0000:24: resource 1 [mem 0xfe100000-0xfe1fffff] [ 0.682827] pci_bus 0000:25: resource 0 [io 0xc000-0xcfff] [ 0.682828] pci_bus 0000:25: resource 1 [mem 0xfe000000-0xfe0fffff] [ 0.682829] pci_bus 0000:25: resource 2 [mem 0xf0300000-0xf03fffff 64bit pref] [ 0.682830] pci_bus 0000:26: resource 0 [io 0xf000-0xffff] [ 0.682831] pci_bus 0000:26: resource 1 [mem 0xfe800000-0xfe8fffff] [ 0.682832] pci_bus 0000:26: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.682834] pci_bus 0000:27: resource 1 [mem 0xfe400000-0xfe6fffff] [ 0.682835] pci_bus 0000:28: resource 1 [mem 0xfe700000-0xfe7fffff] [ 0.682927] NET: Registered protocol family 2 [ 0.683063] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes) [ 0.683142] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.683439] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.683559] TCP: Hash tables configured (established 262144 bind 65536) [ 0.683603] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 0.683677] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 0.683777] NET: Registered protocol family 1 [ 0.683951] pci 0000:26:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.684070] PCI: CLS 64 bytes, default 64 [ 0.684105] Unpacking initramfs... [ 0.772165] Freeing initrd memory: 7032K [ 0.772182] AMD-Vi: IOMMU performance counters supported [ 0.772455] iommu: Adding device 0000:00:01.0 to group 0 [ 0.772564] iommu: Adding device 0000:00:01.1 to group 1 [ 0.772665] iommu: Adding device 0000:00:01.3 to group 2 [ 0.772773] iommu: Adding device 0000:00:02.0 to group 3 [ 0.772879] iommu: Adding device 0000:00:03.0 to group 4 [ 0.772984] iommu: Adding device 0000:00:03.1 to group 5 [ 0.773085] iommu: Adding device 0000:00:04.0 to group 6 [ 0.773193] iommu: Adding device 0000:00:07.0 to group 7 [ 0.773287] iommu: Adding device 0000:00:07.1 to group 8 [ 0.773390] iommu: Adding device 0000:00:08.0 to group 9 [ 0.773482] iommu: Adding device 0000:00:08.1 to group 10 [ 0.773586] iommu: Adding device 0000:00:14.0 to group 11 [ 0.773598] iommu: Adding device 0000:00:14.3 to group 11 [ 0.773715] iommu: Adding device 0000:00:18.0 to group 12 [ 0.773727] iommu: Adding device 0000:00:18.1 to group 12 [ 0.773738] iommu: Adding device 0000:00:18.2 to group 12 [ 0.773750] iommu: Adding device 0000:00:18.3 to group 12 [ 0.773761] iommu: Adding device 0000:00:18.4 to group 12 [ 0.773773] iommu: Adding device 0000:00:18.5 to group 12 [ 0.773784] iommu: Adding device 0000:00:18.6 to group 12 [ 0.773796] iommu: Adding device 0000:00:18.7 to group 12 [ 0.773900] iommu: Adding device 0000:01:00.0 to group 13 [ 0.774013] iommu: Adding device 0000:03:00.0 to group 14 [ 0.774034] iommu: Adding device 0000:03:00.1 to group 14 [ 0.774053] iommu: Adding device 0000:03:00.2 to group 14 [ 0.774063] iommu: Adding device 0000:1d:00.0 to group 14 [ 0.774074] iommu: Adding device 0000:1d:01.0 to group 14 [ 0.774084] iommu: Adding device 0000:1d:04.0 to group 14 [ 0.774093] iommu: Adding device 0000:1d:05.0 to group 14 [ 0.774103] iommu: Adding device 0000:1d:06.0 to group 14 [ 0.774112] iommu: Adding device 0000:1d:07.0 to group 14 [ 0.774128] iommu: Adding device 0000:1f:00.0 to group 14 [ 0.774138] iommu: Adding device 0000:24:00.0 to group 14 [ 0.774154] iommu: Adding device 0000:25:00.0 to group 14 [ 0.774269] iommu: Adding device 0000:26:00.0 to group 15 [ 0.774288] iommu: Using direct mapping for device 0000:26:00.0 [ 0.774315] iommu: Adding device 0000:26:00.1 to group 15 [ 0.774372] iommu: Adding device 0000:27:00.0 to group 16 [ 0.774473] iommu: Adding device 0000:27:00.2 to group 17 [ 0.774566] iommu: Adding device 0000:27:00.3 to group 18 [ 0.774683] iommu: Adding device 0000:28:00.0 to group 19 [ 0.774778] iommu: Adding device 0000:28:00.2 to group 20 [ 0.774884] iommu: Adding device 0000:28:00.3 to group 21 [ 0.775122] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40 [ 0.775122] AMD-Vi: Extended features (0xf77ef22294ada): [ 0.775123] PPR NX GT IA GA PC GA_vAPIC [ 0.775126] AMD-Vi: Interrupt remapping enabled [ 0.775126] AMD-Vi: virtual APIC enabled [ 0.775239] AMD-Vi: Lazy IO/TLB flushing enabled [ 0.776146] amd_uncore: AMD NB counters detected [ 0.776150] amd_uncore: AMD LLC counters detected [ 0.776655] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank). [ 0.776700] Scanning for low memory corruption every 60 seconds [ 0.777254] Initialise system trusted keyrings [ 0.777267] Key type blacklist registered [ 0.777333] workingset: timestamp_bits=44 max_order=23 bucket_order=0 [ 0.778205] zbud: loaded [ 0.779706] Key type asymmetric registered [ 0.779708] Asymmetric key parser 'x509' registered [ 0.779734] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.779776] io scheduler noop registered [ 0.779777] io scheduler deadline registered [ 0.779808] io scheduler cfq registered (default) [ 0.779809] io scheduler mq-deadline registered [ 0.779810] io scheduler kyber registered [ 0.779814] io scheduler bfq registered [ 0.782402] pcieport 0000:00:01.1: AER enabled with IRQ 26 [ 0.782437] pcieport 0000:00:01.3: AER enabled with IRQ 27 [ 0.782456] pcieport 0000:00:03.1: AER enabled with IRQ 28 [ 0.782474] pcieport 0000:00:07.1: AER enabled with IRQ 29 [ 0.782490] pcieport 0000:00:08.1: AER enabled with IRQ 31 [ 0.782500] pcieport 0000:00:01.1: Signaling PME with IRQ 26 [ 0.782511] pcieport 0000:00:01.3: Signaling PME with IRQ 27 [ 0.782523] pcieport 0000:00:03.1: Signaling PME with IRQ 28 [ 0.782533] pcieport 0000:00:07.1: Signaling PME with IRQ 29 [ 0.782548] pcieport 0000:00:08.1: Signaling PME with IRQ 31 [ 0.782598] efifb: probing for efifb [ 0.782607] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k [ 0.782608] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 0.782608] efifb: scrolling: redraw [ 0.782609] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.783846] Console: switching to colour frame buffer device 128x48 [ 0.784855] fb0: EFI VGA frame buffer device [ 0.784910] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.784917] ACPI: Power Button [PWRB] [ 0.784948] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.784967] ACPI: Power Button [PWRF] [ 0.785028] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.785151] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.785216] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.785321] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.785382] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.785476] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.785583] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.785677] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.785754] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.785833] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.785908] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.791500] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.791721] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.791839] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.791919] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.792004] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.792324] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.813374] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.815164] nvme nvme0: pci function 0000:01:00.0 [ 0.815484] ledtrig-cpu: registered to indicate activity on CPUs [ 0.815708] NET: Registered protocol family 10 [ 0.818002] Segment Routing with IPv6 [ 0.818014] NET: Registered protocol family 17 [ 0.818578] RAS: Correctable Errors collector initialized. [ 0.819089] microcode: CPU0: patch_level=0x08001136 [ 0.819093] microcode: CPU1: patch_level=0x08001136 [ 0.819096] microcode: CPU2: patch_level=0x08001136 [ 0.819100] microcode: CPU3: patch_level=0x08001136 [ 0.819102] microcode: CPU4: patch_level=0x08001136 [ 0.819105] microcode: CPU5: patch_level=0x08001136 [ 0.819109] microcode: CPU6: patch_level=0x08001136 [ 0.819113] microcode: CPU7: patch_level=0x08001136 [ 0.819118] microcode: CPU8: patch_level=0x08001136 [ 0.819122] microcode: CPU9: patch_level=0x08001136 [ 0.819127] microcode: CPU10: patch_level=0x08001136 [ 0.819132] microcode: CPU11: patch_level=0x08001136 [ 0.819136] microcode: CPU12: patch_level=0x08001136 [ 0.819141] microcode: CPU13: patch_level=0x08001136 [ 0.819146] microcode: CPU14: patch_level=0x08001136 [ 0.819150] microcode: CPU15: patch_level=0x08001136 [ 0.819184] microcode: Microcode Update Driver: v2.2. [ 0.819198] sched_clock: Marking stable (819180936, 0)->(897468455, -78287519) [ 0.819432] registered taskstats version 1 [ 0.819438] Loading compiled-in X.509 certificates [ 0.819459] zswap: loaded using pool lzo/zbud [ 0.821386] Key type big_key registered [ 0.821774] Magic number: 14:898:243 [ 0.821869] hctosys: unable to open rtc device (rtc0) [ 0.823596] Freeing unused kernel memory: 1452K [ 0.823597] Write protecting the kernel read-only data: 16384k [ 0.823984] Freeing unused kernel memory: 2016K [ 0.825427] Freeing unused kernel memory: 724K [ 0.918964] SCSI subsystem initialized [ 0.920852] ACPI: bus type USB registered [ 0.920875] usbcore: registered new interface driver usbfs [ 0.920887] usbcore: registered new interface driver hub [ 0.920968] usbcore: registered new device driver usb [ 0.922459] libata version 3.00 loaded. [ 0.924148] QUIRK: Enable AMD PLL fix [ 0.924167] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.924173] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1 [ 0.979518] xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x48000418 [ 0.979649] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.979651] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.979652] usb usb1: Product: xHCI Host Controller [ 0.979653] usb usb1: Manufacturer: Linux 4.16.3-1-ARCH xhci-hcd [ 0.979654] usb usb1: SerialNumber: 0000:03:00.0 [ 0.979758] hub 1-0:1.0: USB hub found [ 0.979770] hub 1-0:1.0: 10 ports detected [ 0.980036] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.980039] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2 [ 0.980041] xhci_hcd 0000:03:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 0.980066] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.980081] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.980082] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.980083] usb usb2: Product: xHCI Host Controller [ 0.980084] usb usb2: Manufacturer: Linux 4.16.3-1-ARCH xhci-hcd [ 0.980085] usb usb2: SerialNumber: 0000:03:00.0 [ 0.980151] hub 2-0:1.0: USB hub found [ 0.980159] hub 2-0:1.0: 4 ports detected [ 0.980226] usb: port power management may be unreliable [ 0.980320] ahci 0000:03:00.1: version 3.0 [ 0.980408] xhci_hcd 0000:27:00.3: xHCI Host Controller [ 0.980411] xhci_hcd 0000:27:00.3: new USB bus registered, assigned bus number 3 [ 0.980474] ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled [ 0.980504] xhci_hcd 0000:27:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x00000418 [ 0.980510] ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode [ 0.980513] ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst [ 0.980600] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.980601] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.980602] usb usb3: Product: xHCI Host Controller [ 0.980603] usb usb3: Manufacturer: Linux 4.16.3-1-ARCH xhci-hcd [ 0.980604] usb usb3: SerialNumber: 0000:27:00.3 [ 0.980683] hub 3-0:1.0: USB hub found [ 0.980689] hub 3-0:1.0: 4 ports detected [ 0.980828] xhci_hcd 0000:27:00.3: xHCI Host Controller [ 0.980830] xhci_hcd 0000:27:00.3: new USB bus registered, assigned bus number 4 [ 0.980841] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.980856] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.980857] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.980858] usb usb4: Product: xHCI Host Controller [ 0.980859] usb usb4: Manufacturer: Linux 4.16.3-1-ARCH xhci-hcd [ 0.980859] usb usb4: SerialNumber: 0000:27:00.3 [ 0.980931] hub 4-0:1.0: USB hub found [ 0.980937] hub 4-0:1.0: 4 ports detected [ 0.981162] scsi host0: ahci [ 0.981317] scsi host1: ahci [ 0.981394] scsi host2: ahci [ 0.981711] scsi host3: ahci [ 0.981856] scsi host4: ahci [ 0.982067] scsi host5: ahci [ 0.982179] scsi host6: ahci [ 0.982291] scsi host7: ahci [ 0.982318] ata1: SATA max UDMA/133 abar m131072@0xfe380000 port 0xfe380100 irq 47 [ 0.982320] ata2: SATA max UDMA/133 abar m131072@0xfe380000 port 0xfe380180 irq 47 [ 0.982321] ata3: DUMMY [ 0.982321] ata4: DUMMY [ 0.982322] ata5: SATA max UDMA/133 abar m131072@0xfe380000 port 0xfe380300 irq 47 [ 0.982324] ata6: SATA max UDMA/133 abar m131072@0xfe380000 port 0xfe380380 irq 47 [ 0.982324] ata7: DUMMY [ 0.982325] ata8: DUMMY [ 0.982465] ahci 0000:24:00.0: SSS flag set, parallel bus scan disabled [ 0.982505] ahci 0000:24:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 0.982507] ahci 0000:24:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs [ 0.982697] scsi host8: ahci [ 0.982763] scsi host9: ahci [ 0.982791] ata9: SATA max UDMA/133 abar m512@0xfe100000 port 0xfe100100 irq 49 [ 0.982793] ata10: SATA max UDMA/133 abar m512@0xfe100000 port 0xfe100180 irq 49 [ 0.982914] ahci 0000:28:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 0.982916] ahci 0000:28:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 0.983034] scsi host10: ahci [ 0.983062] ata11: SATA max UDMA/133 abar m4096@0xfe708000 port 0xfe708100 irq 51 [ 1.044237] nvme0n1: p1 p2 [ 1.290296] ata11: SATA link down (SStatus 0 SControl 300) [ 1.290301] ata1: SATA link down (SStatus 0 SControl 300) [ 1.307068] usb 1-4: new high-speed USB device number 2 using xhci_hcd [ 1.310053] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.450421] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.451423] ata9.00: ATA-9: ST2000DM001-1ER164, CC25, max UDMA/133 [ 1.451424] ata9.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.452535] ata9.00: configured for UDMA/133 [ 1.454285] usb 3-3: New USB device found, idVendor=2109, idProduct=2812 [ 1.454287] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.454288] usb 3-3: Product: USB2.0 Hub [ 1.454289] usb 3-3: Manufacturer: VIA Labs, Inc. [ 1.461599] hub 3-3:1.0: USB hub found [ 1.462034] hub 3-3:1.0: 4 ports detected [ 1.545046] usb 1-4: New USB device found, idVendor=0951, idProduct=1665 [ 1.545048] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.545050] usb 1-4: Product: DataTraveler 2.0 [ 1.545051] usb 1-4: Manufacturer: Kingston [ 1.545052] usb 1-4: SerialNumber: 1C6F654E5934FE318953CC16 [ 1.551677] usb-storage 1-4:1.0: USB Mass Storage device detected [ 1.551784] scsi host11: usb-storage 1-4:1.0 [ 1.551844] usbcore: registered new interface driver usb-storage [ 1.552313] usbcore: registered new interface driver uas [ 1.574105] usb 4-3: new SuperSpeed USB device number 2 using xhci_hcd [ 1.605406] ata2: SATA link down (SStatus 0 SControl 300) [ 1.783742] tsc: Refined TSC clocksource calibration: 2994.373 MHz [ 1.783755] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b2981a153b, max_idle_ns: 440795305653 ns [ 1.783996] clocksource: Switched to clocksource tsc [ 1.831207] usb 4-3: New USB device found, idVendor=2109, idProduct=0812 [ 1.831209] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.831211] usb 4-3: Product: USB3.0 Hub [ 1.831211] usb 4-3: Manufacturer: VIA Labs, Inc. [ 1.845572] hub 4-3:1.0: USB hub found [ 1.845830] hub 4-3:1.0: 4 ports detected [ 1.950395] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 2.080413] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.081363] ata5.00: ATA-9: ST2000DM001-1ER164, CC25, max UDMA/133 [ 2.081365] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.082507] ata5.00: configured for UDMA/133 [ 2.082615] scsi 4:0:0:0: Direct-Access ATA ST2000DM001-1ER1 CC25 PQ: 0 ANSI: 5 [ 2.093712] usb 3-4: New USB device found, idVendor=0644, idProduct=8045 [ 2.093714] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.093715] usb 3-4: Product: TASCAM US-2x2 [ 2.093716] usb 3-4: Manufacturer: TEAC Corporation [ 2.104821] hidraw: raw HID events driver (C) Jiri Kosina [ 2.106023] usbcore: registered new interface driver usbhid [ 2.106024] usbhid: USB HID core driver [ 2.106662] hid-generic 0003:0644:8045.0001: hiddev0,hidraw0: USB HID v1.10 Device [TEAC Corporation TASCAM US-2x2] on usb-0000:27:00.3-4/input4 [ 2.177075] usb 3-3.1: new high-speed USB device number 4 using xhci_hcd [ 2.284209] usb 3-3.1: New USB device found, idVendor=2109, idProduct=2812 [ 2.284211] usb 3-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.284213] usb 3-3.1: Product: USB2.0 Hub [ 2.284214] usb 3-3.1: Manufacturer: VIA Labs, Inc. [ 2.293647] hub 3-3.1:1.0: USB hub found [ 2.294207] hub 3-3.1:1.0: 4 ports detected [ 2.353894] usb 4-3.1: new SuperSpeed USB device number 3 using xhci_hcd [ 2.557070] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.569077] ata6.00: ATA-9: INTEL SSDSC2CT080A4, 335u, max UDMA/133 [ 2.569079] ata6.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.578689] scsi 11:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 4 [ 2.579091] ata6.00: configured for UDMA/133 [ 2.579268] scsi 5:0:0:0: Direct-Access ATA INTEL SSDSC2CT08 335u PQ: 0 ANSI: 5 [ 2.579545] scsi 8:0:0:0: Direct-Access ATA ST2000DM001-1ER1 CC25 PQ: 0 ANSI: 5 [ 2.580271] sd 4:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 2.580273] sd 4:0:0:0: [sda] 4096-byte physical blocks [ 2.580287] sd 4:0:0:0: [sda] Write Protect is off [ 2.580289] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.580313] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.580361] sd 5:0:0:0: [sdc] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 2.580371] sd 5:0:0:0: [sdc] Write Protect is off [ 2.580374] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.580375] sd 8:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 2.580376] sd 8:0:0:0: [sdd] 4096-byte physical blocks [ 2.580388] sd 8:0:0:0: [sdd] Write Protect is off [ 2.580389] sd 8:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.580395] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.580405] sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.580464] sd 11:0:0:0: [sdb] 15131636 512-byte logical blocks: (7.75 GB/7.21 GiB) [ 2.580679] sd 11:0:0:0: [sdb] Write Protect is off [ 2.580680] sd 11:0:0:0: [sdb] Mode Sense: 45 00 00 00 [ 2.580864] sd 11:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 2.581115] sdc: sdc1 sdc2 [ 2.581335] sd 5:0:0:0: [sdc] Attached SCSI disk [ 2.582711] sdb: sdb1 [ 2.583613] sd 11:0:0:0: [sdb] Attached SCSI removable disk [ 2.597404] sd 8:0:0:0: [sdd] Attached SCSI disk [ 2.603886] sd 4:0:0:0: [sda] Attached SCSI disk [ 2.607964] usb 4-3.1: New USB device found, idVendor=2109, idProduct=0812 [ 2.607966] usb 4-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.607967] usb 4-3.1: Product: USB3.0 Hub [ 2.607968] usb 4-3.1: Manufacturer: VIA Labs, Inc. [ 2.613605] hub 4-3.1:1.0: USB hub found [ 2.613830] hub 4-3.1:1.0: 4 ports detected [ 2.690407] usb 3-3.1.1: new full-speed USB device number 5 using xhci_hcd [ 2.804324] usb 3-3.1.1: New USB device found, idVendor=258a, idProduct=001f [ 2.804326] usb 3-3.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.804328] usb 3-3.1.1: Product: Mechanical Keyboard [ 2.804329] usb 3-3.1.1: Manufacturer: SINO WEALTH [ 2.841570] input: SINO WEALTH Mechanical Keyboard as /devices/pci0000:00/0000:00:07.1/0000:27:00.3/usb3/3-3/3-3.1/3-3.1.1/3-3.1.1:1.0/0003:258A:001F.0002/input/input2 [ 2.896876] hid-generic 0003:258A:001F.0002: input,hidraw1: USB HID v1.10 Keyboard [SINO WEALTH Mechanical Keyboard] on usb-0000:27:00.3-3.1.1/input0 [ 2.902489] input: SINO WEALTH Mechanical Keyboard as /devices/pci0000:00/0000:00:07.1/0000:27:00.3/usb3/3-3/3-3.1/3-3.1.1/3-3.1.1:1.1/0003:258A:001F.0003/input/input3 [ 2.957374] hid-generic 0003:258A:001F.0003: input,hiddev1,hidraw2: USB HID v1.10 Keyboard [SINO WEALTH Mechanical Keyboard] on usb-0000:27:00.3-3.1.1/input1 [ 3.043738] usb 3-3.1.3: new full-speed USB device number 6 using xhci_hcd [ 3.050414] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.051348] ata10.00: ATA-9: ST2000DM001-1ER164, CC25, max UDMA/133 [ 3.051349] ata10.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.052474] ata10.00: configured for UDMA/133 [ 3.052782] scsi 9:0:0:0: Direct-Access ATA ST2000DM001-1ER1 CC25 PQ: 0 ANSI: 5 [ 3.053020] sd 9:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.053022] sd 9:0:0:0: [sde] 4096-byte physical blocks [ 3.053046] sd 9:0:0:0: [sde] Write Protect is off [ 3.053049] sd 9:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 3.053072] sd 9:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.070345] sd 9:0:0:0: [sde] Attached SCSI disk [ 3.157476] usb 3-3.1.3: New USB device found, idVendor=046d, idProduct=c52b [ 3.157478] usb 3-3.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.157479] usb 3-3.1.3: Product: USB Receiver [ 3.157481] usb 3-3.1.3: Manufacturer: Logitech [ 3.206311] logitech-djreceiver 0003:046D:C52B.0006: hiddev2,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:27:00.3-3.1.3/input2 [ 3.290411] usb 3-3.1.4: new full-speed USB device number 7 using xhci_hcd [ 3.319480] input: Logitech Unifying Device. Wireless PID:101a as /devices/pci0000:00/0000:00:07.1/0000:27:00.3/usb3/3-3/3-3.1/3-3.1.3/3-3.1.3:1.2/0003:046D:C52B.0006/0003:046D:101A.0007/input/input4 [ 3.319526] hid-generic 0003:046D:101A.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101a] on usb-0000:27:00.3-3.1.3:1 [ 3.327308] input: Logitech Performance MX as /devices/pci0000:00/0000:00:07.1/0000:27:00.3/usb3/3-3/3-3.1/3-3.1.3/3-3.1.3:1.2/0003:046D:C52B.0006/0003:046D:101A.0007/input/input5 [ 3.327371] logitech-hidpp-device 0003:046D:101A.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Performance MX] on usb-0000:27:00.3-3.1.3:1 [ 3.356614] SGI XFS with ACLs, security attributes, realtime, scrub, no debug enabled [ 3.358687] XFS (nvme0n1p2): Mounting V5 Filesystem [ 3.371727] XFS (nvme0n1p2): Ending clean mount [ 3.403352] usb 3-3.1.4: New USB device found, idVendor=046d, idProduct=c52b [ 3.403355] usb 3-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.403356] usb 3-3.1.4: Product: USB Receiver [ 3.403357] usb 3-3.1.4: Manufacturer: Logitech [ 3.427842] logitech-djreceiver 0003:046D:C52B.000A: hiddev3,hidraw5: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:27:00.3-3.1.4/input2 [ 3.437981] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid) [ 3.454465] systemd[1]: Detected architecture x86-64. [ 3.460142] systemd[1]: Set hostname to . [ 3.548589] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 3.548651] systemd[1]: Listening on udev Kernel Socket. [ 3.549269] input: Logitech M705 as /devices/pci0000:00/0000:00:07.1/0000:27:00.3/usb3/3-3/3-3.1/3-3.1.4/3-3.1.4:1.2/0003:046D:C52B.000A/0003:046D:101B.000B/input/input6 [ 3.549316] logitech-hidpp-device 0003:046D:101B.000B: input,hidraw6: USB HID v1.11 Mouse [Logitech M705] on usb-0000:27:00.3-3.1.4:1 [ 3.550008] systemd[1]: Created slice system-getty.slice. [ 3.552181] systemd[1]: Reached target Swap. [ 3.552554] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.552607] systemd[1]: Listening on LVM2 poll daemon socket. [ 3.553634] systemd[1]: Listening on Process Core Dump Socket. [ 3.574446] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 3.574494] sd 11:0:0:0: Attached scsi generic sg1 type 0 [ 3.574541] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 3.574586] sd 8:0:0:0: Attached scsi generic sg3 type 0 [ 3.574625] sd 9:0:0:0: Attached scsi generic sg4 type 0 [ 3.582165] fuse init (API version 7.26) [ 3.582736] RPC: Registered named UNIX socket transport module. [ 3.582738] RPC: Registered udp transport module. [ 3.582738] RPC: Registered tcp transport module. [ 3.582739] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.604511] vboxdrv: loading out-of-tree module taints kernel. [ 3.609769] vboxdrv: Found 16 processor cores [ 3.611446] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 3.620596] mousedev: PS/2 mouse device common for all mice [ 3.625984] systemd-journald[390]: Received request to flush runtime journal from PID 1 [ 3.626909] vboxdrv: TSC mode is Invariant, tentative frequency 2994354421 Hz [ 3.626910] vboxdrv: Successfully loaded version 5.2.10 (interface 0x00290001) [ 3.628453] VBoxPciLinuxInit [ 3.628456] vboxpci: IOMMU found [ 3.629726] VBoxNetAdp: Successfully started. [ 3.630709] VBoxNetFlt: Successfully started. [ 3.654033] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.674847] random: crng init done [ 3.676599] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.677136] r8169 0000:1f:00.0 eth0: RTL8168e/8111e at 0x000000007e3504dd, ec:08:6b:04:61:c6, XID 0c200000 IRQ 67 [ 3.677138] r8169 0000:1f:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.677171] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.687714] r8169 0000:25:00.0 eth1: RTL8168g/8111g at 0x00000000f18cd00a, 70:85:c2:3d:17:dc, XID 0c000800 IRQ 68 [ 3.687718] r8169 0000:25:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.687805] Linux agpgart interface v0.103 [ 3.688548] acpi_cpufreq: overriding BIOS provided _PSD data [ 3.689875] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 3.689877] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 3.692947] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 3.692982] ccp 0000:27:00.2: enabling device (0000 -> 0002) [ 3.693231] sp5100-tco sp5100-tco: I/O address 0x0cd6 already in use [ 3.696852] ccp 0000:27:00.2: ccp enabled [ 3.696885] ccp 0000:27:00.2: psp initialization failed [ 3.696886] ccp 0000:27:00.2: enabled [ 3.697859] sp5100-tco: probe of sp5100-tco failed with error -16 [ 3.702453] rtc_cmos 00:02: RTC can wake from S4 [ 3.702700] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 3.702761] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 3.704382] snd_hda_intel 0000:26:00.1: Handle vga_switcheroo audio client [ 3.704385] snd_hda_intel 0000:26:00.1: Force to non-snoop mode [ 3.704675] snd_hda_intel 0000:28:00.3: enabling device (0000 -> 0002) [ 3.721273] cryptd: max_cpu_qlen set to 1000 [ 3.721363] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 3.747298] r8169 0000:1f:00.0 enp31s0: renamed from eth0 [ 3.761236] r8169 0000:25:00.0 enp37s0: renamed from eth1 [ 3.772081] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input8 [ 3.772141] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input9 [ 3.772186] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input10 [ 3.772246] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input11 [ 3.772309] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input12 [ 3.772378] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input13 [ 3.779023] AVX2 version of gcm_enc/dec engaged. [ 3.779024] AES CTR mode by8 optimization enabled [ 3.779325] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 3.779327] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.779329] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 3.779330] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 3.779331] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 3.779333] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 3.779334] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 3.779336] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 3.831817] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input14 [ 3.831883] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input15 [ 3.831948] md127: detected capacity change from 0 to 6000793878528 [ 3.831949] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input16 [ 3.832003] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input17 [ 3.832046] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input18 [ 3.879718] kvm: Nested Virtualization enabled [ 3.879722] kvm: Nested Paging enabled [ 3.879722] SVM: Virtual VMLOAD VMSAVE supported [ 3.879722] SVM: Virtual GIF supported [ 3.881618] MCE: In-kernel MCE decoding enabled. [ 3.883766] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.883767] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 3.965825] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.965827] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 3.997693] [drm] amdgpu kernel modesetting enabled. [ 4.001015] AMD IOMMUv2 driver by Joerg Roedel [ 4.055129] Parsing CRAT table with 1 nodes [ 4.055136] Ignoring ACPI CRAT on non-APU system [ 4.055139] Virtual CRAT table created for CPU [ 4.055140] Parsing CRAT table with 1 nodes [ 4.055141] Creating topology SYSFS entries [ 4.055155] Topology: Add CPU node [ 4.055156] Finished initializing topology [ 4.055227] kfd kfd: Initialized module [ 4.055705] checking generic (e0000000 300000) vs hw (e0000000 10000000) [ 4.055706] fb: switching to amdgpudrmfb from EFI VGA [ 4.055726] Console: switching to colour dummy device 80x25 [ 4.056030] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1462:0x3417 0xE7). [ 4.056052] [drm] register mmio base: 0xFE800000 [ 4.056052] [drm] register mmio size: 262144 [ 4.056062] [drm] probing gen 2 caps for device 1022:1453 = 737903/e [ 4.056063] [drm] probing mlw for device 1022:1453 = 737903 [ 4.056071] [drm] UVD is enabled in VM mode [ 4.056072] [drm] UVD ENC is enabled in VM mode [ 4.056073] [drm] VCE enabled in VM mode [ 4.056257] amdgpu 0000:26:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff [ 4.056271] ATOM BIOS: MS-V34113-F1 [ 4.056291] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 4.057673] amdgpu 0000:26:00.0: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used) [ 4.057678] amdgpu 0000:26:00.0: GTT: 256M 0x0000000000000000 - 0x000000000FFFFFFF [ 4.057687] [drm] Detected VRAM RAM=8192M, BAR=256M [ 4.057689] [drm] RAM width 256bits GDDR5 [ 4.057753] [TTM] Zone kernel: Available graphics memory: 16469178 kiB [ 4.057755] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 4.057756] [TTM] Initializing pool allocator [ 4.057761] [TTM] Initializing DMA pool allocator [ 4.057789] [drm] amdgpu: 8192M of VRAM memory ready [ 4.057791] [drm] amdgpu: 8192M of GTT memory ready. [ 4.057804] [drm] GART: num cpu pages 65536, num gpu pages 65536 [ 4.057916] [drm] PCIE GART of 256M enabled (table at 0x000000F400040000). [ 4.058873] [drm] Chained IB support enabled! [ 4.063532] [drm] Found UVD firmware Version: 1.130 Family ID: 16 [ 4.064765] [drm] Found VCE firmware Version: 52.4 Binary ID: 3 [ 4.123665] [drm] DM_PPLIB: values for Engine clock [ 4.123666] [drm] DM_PPLIB: 30000 [ 4.123667] [drm] DM_PPLIB: 60000 [ 4.123667] [drm] DM_PPLIB: 92700 [ 4.123667] [drm] DM_PPLIB: 117900 [ 4.123668] [drm] DM_PPLIB: 125100 [ 4.123668] [drm] DM_PPLIB: 129400 [ 4.123668] [drm] DM_PPLIB: 133900 [ 4.123669] [drm] DM_PPLIB: 138000 [ 4.123669] [drm] DM_PPLIB: Validation clocks: [ 4.123669] [drm] DM_PPLIB: engine_max_clock: 138000 [ 4.123670] [drm] DM_PPLIB: memory_max_clock: 200000 [ 4.123670] [drm] DM_PPLIB: level : 0 [ 4.123671] [drm] DM_PPLIB: values for Memory clock [ 4.123671] [drm] DM_PPLIB: 30000 [ 4.123672] [drm] DM_PPLIB: 100000 [ 4.123672] [drm] DM_PPLIB: 200000 [ 4.123672] [drm] DM_PPLIB: Validation clocks: [ 4.123673] [drm] DM_PPLIB: engine_max_clock: 138000 [ 4.123673] [drm] DM_PPLIB: memory_max_clock: 200000 [ 4.123673] [drm] DM_PPLIB: level : 0 [ 4.133408] [drm] Display Core initialized with v3.1.27! [ 4.162388] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.162390] [drm] Driver supports precise vblank timestamp query. [ 4.194083] [drm] UVD and UVD ENC initialized successfully. [ 4.261836] EXT4-fs (md127): mounted filesystem with ordered data mode. Opts: stripe=384,data=ordered [ 4.295032] [drm] VCE initialized successfully. [ 4.471904] usbcore: registered new interface driver snd-usb-audio [ 4.809317] [drm] fb mappable at 0xE056A000 [ 4.809319] [drm] vram apper at 0xE0000000 [ 4.809320] [drm] size 33177600 [ 4.809320] [drm] fb depth is 24 [ 4.809321] [drm] pitch is 15360 [ 4.809409] fbcon: amdgpudrmfb (fb0) is primary device [ 4.830438] Console: switching to colour frame buffer device 480x135 [ 4.858803] amdgpu 0000:26:00.0: fb0: amdgpudrmfb frame buffer device [ 4.883984] [drm] Initialized amdgpu 3.23.0 20150101 for 0000:26:00.0 on minor 0 [ 4.991916] IPv6: ADDRCONF(NETDEV_UP): enp31s0: link is not ready [ 5.137361] r8169 0000:1f:00.0 enp31s0: link down [ 5.137425] IPv6: ADDRCONF(NETDEV_UP): enp31s0: link is not ready [ 5.139415] IPv6: ADDRCONF(NETDEV_UP): enp37s0: link is not ready [ 5.143234] NFSD: starting 90-second grace period (net f0000099) [ 5.185987] r8169 0000:25:00.0 enp37s0: link down [ 5.185988] r8169 0000:25:00.0 enp37s0: link down [ 5.186063] IPv6: ADDRCONF(NETDEV_UP): enp37s0: link is not ready [ 8.064086] r8169 0000:25:00.0 enp37s0: link up [ 8.064097] IPv6: ADDRCONF(NETDEV_CHANGE): enp37s0: link becomes ready [ 19.716496] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 25.893265] logitech-hidpp-device 0003:046D:101B.000B: HID++ 1.0 device connected. [ 60.300918] SUPR0GipMap: fGetGipCpu=0xb [ 60.725311] vboxdrv: 00000000a38ecd65 VMMR0.r0 [ 60.772117] IPv6: ADDRCONF(NETDEV_UP): vboxnet0: link is not ready [ 60.804612] VBoxNetFlt: attached to 'vboxnet0' / 0a:00:27:00:00:00 [ 60.804623] IPv6: ADDRCONF(NETDEV_CHANGE): vboxnet0: link becomes ready [ 60.804790] device vboxnet0 entered promiscuous mode [ 60.879527] vboxdrv: 000000007ab8296b VBoxDDR0.r0 [ 60.987941] vboxpci: created IOMMU domain 00000000f1b15eec [ 89.522296] vboxpci: created IOMMU domain 000000005e975740 [ 107.119804] vboxpci: created IOMMU domain 00000000e8ac1ebc