X399 Phantom Gaming 6 Linux Soft locks

I just finished a build with this motherboard and a 1920x and 2 16gb ( Corsair LPX) ram chips. Everything was going smooth until I started getting soft locks and boot fails. Anyone have any idea on how to start diagnosing? I’ve tried the memory at the detected speed as well as the XMP profile settings.

The system will sometimes run for 24 hours before it freezes up. Sometimes it will freeze up after 2 minutes. It will often freeze after booting out of grub.

First thing first you should try clearing the CMOS and start from fresh. If that doesen’t help it could be an issue with something connected to the system. It could be possible that, if the system often freezes after GRUB, a USB device is messing up with your system and throwing it out of whack (it happened to me with a damaged Logitech wireless dongle).

1 Like

make sure the idle standby power is set to “normal” and not “low”

Thanks. That seems to have had something to do with the issue. I removed the usb hub I had and plugged in the kb/mouse directly and things have good.

1 Like

Thanks! I’ll give that a whirl also.