Watercooling high temps?

Hey guys,


I recently got myself a Corsair h70 with two 120mm Corsair fans, not just the general airflow ones.

Anyway, running prime95 with a 4.1ghz overclock I get temps of around 65-75 degrees after about 20 minutes. I think that is quite high considering I am using a push-pull configuration with watercooling, should I be worried or is this normal?

 

Thanks!

IzaakB, what processor?

Under 80 you will be fine but probably a 240mm radiator works better if you have big overclock...

 

i5 3570k, I forgot to add that bit. I know it's fine, but it seems quite high, isn't it?

Are the fans push really hot air out from your case?

 

Nope, there's two 120mm in the front of my case, one is directly infront of the cooling unit with about a 20cm gap with no obstructions.

Than something is wrong... Did you use termal pasta?

 

Can you show a picture about your computer while opened?

I used the thermal paste that was already on the cooler, I'll post a picture when I get home from work.