Ready to order parts - last ditch attempt at help

Hola,

I am close to purchasing the parts for my first PC, below is the questionnaire suggested in the sticky with my answers, along with a PCPartPicker list of components I have set together so far - I already have a normal hard drive for storage, hence the absence of one.

(http://uk.pcpartpicker.com/p/DZyqP6)

I have a few questions regarding the build I have included, they are as follows

- The CPU only supports 1333 memory, is this easy enough to fix as my build includes 1600?

- Somebody mentioned not getting memory with a voltage above 1.5v for haswell chips, is this an issue as the RAM included is 1.65v?

- I'm looking to overclock (for the first time) the CPU - I've read I can overclock on the board included, will I have any issues with that?

- I do not have an SSD (I have a 1TB 7200 drive for storage), is the one included in the build acceptable for programs?

Thanks for any help you can give, I ideally want to purchase this today, although tomorrow would be acceptable if any drastic changes were needed.

 

Questionnaire

Budget. How much are you willing to spend? As much as the build I have suggested, if a little over £10-20 that's fine, however, this is my first build and I need to keep it cheap.

Where do you live (what country),  and what currency do you use? I live in the UK, we use GBP (£)

Is there a retailer you prefer? No

Do you need or already have peripherals? I have all of the peripherals ready, I have an old monitor (http://www.techradar.com/reviews/pc-mac/monitors-and-projectors/monitors/samsung-syncmaster-2232bw-233535/review) that I will use, however, the resolution only allows me to go to 1680x1050. I was hoping to play some games at 1080p, is this not possible?

What will you be using your future computer for? I will be using the PC for streaming films/tv online, along with gaming. I understand the system will not reach max settings, but I am prepared for that.

Do you overclock or want to get into overclocking? Yes, that is the reason I am getting the CPU mentioned in my list, however, I have not done this before. I would be willing to overclock the GPU if I were to get a cheaper one and it would be beneficial.

Do you plan on going for custom watercooling now, or in the future? No.

OS. Do you need a new one? No, I have Windows 7.

If you Game-

What kind of settings do you like or what FPS do you want to play at? I would like to play at a smooth framerate without jittering / jagged edges. I understand the limitations of my proposed system, as this is my first ever PC.

What resolution will you be playing at? //or would like to play at. I would like to play at 1080p (see above under monitor for my issues).

What kind of games do you like to play? I am hoping to start with titles like Skyrim (graphics mod), Crysis, Battlefield. I am yet to play any games of late (2-3yrs).

If you Render or Edit things- No rendering / editing.

Other Notes:

What is your general experience in building computers? Is this your first build or are you seasoned and just looking for advice? I can build a PC no problem. I have done so in college, for friends, and more recently for family, although I am unaware of any new hardware from the past 5 years (in case things have changed - such as SSD's).

Just my opinion, i don't have much experience with the Pentium line of processors. but if you are going to be using this for gaming i would recommend more of an  A series AMD processor, you will get a little more bang for your money. unless you are bent on using intel then i would go with an intel core series processor. just to avoid as much bottleneck from the CPU.

Hey, there's been some good reviews on the G3258, and at this minute it seems my best option (or so I think). It'd allow me to upgrade to an i5 some time in the near future (Christmas maybe) as it uses the same chipset for motherboard compatibility.

well in the end you would end up wasting money cause you will have bought two processors. also my understanding is the G32xx Series only supports 1333mhz ram while the G34xx series supports 1600mhz ram. i would recommend to either change the ram speed to 1333 or change the processor to G34xx series

I don't have extensive knowledge of the Intel line of motherboards but your best bet for overclocking would be a Z87 based chipset. The board you have should allow you to overclock a bit,but nowhere near the capabilities given by the Z87.

Then again,you are on a budget. Overclocking shouldn't exactly be a priority.Likewise with the SSD.Don't get me wrong,SSDs are fantastic but they don't help in gaming.They improve load times and general responsiveness of the OS. You can opt not getting the SSD at all to keep to your budget

 

You won't be able to play on full HD(1920x1080). Your monitor doesn't have the required number of pixels on screen to display at full HD

 

To my understanding you can change that (the RAM issue) in the BIOS, although I've not done it, it has been mentioned, and I've mentioned it in the post above.

I cannot afford to go i5 at the minute, so going for an AMD chip + board now and swapping to Intel further down the line would cost me more.

Just because it says it only supports 1333 doesn't mean it won't run with higher speed. I have a processor that only "supports" 1866 but its running perfectly fine on 2400. The RAM speed is more dependent on whether or not the motherboard can handle it, and on an unlocked processor it should be plenty able to run higher speed memory

I believe Asus has released BIOSes/UEFIs that allow multiplier changing on the following chipsets:

H81

H87

B85

Do not get the Kingston SSDNow V300.  They have switched to asynchronous flash, resulting in much, much slower performance and lower reliability.  Also, 128GB is quite small.

I would suggest you go with a 1TB Drive: http://uk.pcpartpicker.com/part/western-digital-internal-hard-drive-wd10ezex

If you still want an SSD, and don't plan to install a lot at once: http://uk.pcpartpicker.com/part/crucial-internal-hard-drive-ct120m500ssd1