Random restarts with Linux on new hardware (Completely Random)

Software & Operating Systems Linux
1

Good day all.
I'm new to the forum and created my account today to ask a questions that's been driving me crazy for the last week. I've was introduced to Linux by a work colleague and have been playing around with a few distros, namely Ubuntu Unity,Ubuntu Gnome, Mint and Elementary. Installations of all three went well on a old Lenovo laptop I had laying around the house. However my experience changed after trying the distro's on a desktop of mine. Specs listed below.

  • Intel Pentium 3250
  • Gigabyte h81m-s2v v3.0
  • 4gb ADATA 1600mhz RAM
  • Gigabyte Nvidia GTX 960
  • to list the main items

A few strange things happened, and in no particular order i experienced the following...
The computer randomly restarts without warning, like someone unplugged the machine;

  1. While using Linux in Live mode (Booted from USB)
  2. While installing Linux (During installation process)
  3. While using the installed version (Sometimes installation completes and I'm able to used the distro for a while and install all latest updates and drivers.

Longest I went without restart was 3 hours. Nothing specifically causes the restart, at one point the machine was on idle.

Restarting of the computer happens (all 3 points listed above) while i'm running Linux alongside my Win8.1 installation, and when i install linux on its own dedicated hard drive with my Win8.1 hard drive unplugged.

I'v also noticed the following, if I have Linux installed alongside Win8.1 and booted into Windows using the Grub Menu (Dual booted system) even my Windows OS acts up like Linux (Restarting at random). Only after removing the Linux partition and repairing my Windows MBR it becomes stable again.

Please NOTE: The machine is rock solid (with no restarts) when running Windows in its native way (No dual booted setup with Linux)

The above scenario occurs with all three the distros mentioned earlier in the post, also to note, all three these distro's operate complete fine on the old lenovo laptop.

I've have played around with BIOS settings, updated the BIOS and everything I can think of.

One last note (With each distro when used on the desktop, i get a strange PCI PCC error apon boot and got stuck. However this was fixed by disabling the on-board Intel display in BIOS. Error still displays, however it passes over it and boots.

Thank you.
Looking forward to your thoughts.

2

Run dmesg and post it here (in a spoiler plz)

Also did you install the nvidia drivers?
assuming no then lets do that
open a terminal and type or paste the following 3 commands
sudo add-apt-repository ppa:graphics-drivers/ppa
sudo apt-get update
sudo apt-get install nvidia-352
then reboot

nvidias drm makes linux much more difficult than it needs to be
My computer does the exact same thing until I install gpu drivers (never had the windows issue however I don't use win h8)

1 Like
3

Hi. I'll run the command and report back. However, The restarts occurs at random even while running as Live demo. Further on, Yes I've installed the latest compatable Nvidia Drivers for the system.
And as mentioned, the system even reboots when I setup a dual boot environment and booted into Windows. Maybe a "Grub" issue, not sure.

Thanks for the reply

4

Did all this happen with all 3 distro's?

5

Yes, All three of them.
Took me a week to go through all the troubleshooting a can think of.

6

Hi I ran dmesg, see below. I also tried installing Ubuntu Gnome 16.4, running Kernel 4.2.2, however still restarts like a BOSS.....

[sudo] password for jano:
[ 0.000000] microcode: CPU0 microcode updated early to revision 0x1e, date = 2015-08-13
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-7-generic (buildd@lcy01-12) (gcc version 5.3.1 20160216 (Ubuntu 5.3.1-9ubuntu1) ) #22-Ubuntu SMP Thu Feb 18 20:50:38 UTC 2016 (Ubuntu 4.4.0-7.22-generic 4.4.2)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-7-generic root=UUID=105f6876-45d0-48e9-ac32-325dffeebc95 ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cecf6fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cecf7000-0x00000000cecfdfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cecfe000-0x00000000cf4d0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf4d1000-0x00000000cf6e9fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cf6ea000-0x00000000df0b1fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df0b2000-0x00000000df149fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000df14a000-0x00000000df18ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df190000-0x00000000df245fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df246000-0x00000000df7fefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000df7ff000-0x00000000df7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. H81M-S2PV/H81M-S2PV, BIOS F2 08/11/2015
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F00000000 write-back
[ 0.000000] 1 base 0100000000 mask 7FF0000000 write-back
[ 0.000000] 2 base 0110000000 mask 7FF8000000 write-back
[ 0.000000] 3 base 0118000000 mask 7FFC000000 write-back
[ 0.000000] 4 base 011C000000 mask 7FFE000000 write-back
[ 0.000000] 5 base 011E000000 mask 7FFF000000 write-back
[ 0.000000] 6 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 4GB, range: 256MB, type WB
[ 0.000000] reg 2, base: 4352MB, range: 128MB, type WB
[ 0.000000] reg 3, base: 4480MB, range: 64MB, type WB
[ 0.000000] reg 4, base: 4544MB, range: 32MB, type WB
[ 0.000000] reg 5, base: 4576MB, range: 16MB, type WB
[ 0.000000] reg 6, base: 3584MB, range: 512MB, type UC
[ 0.000000] total RAM covered: 4080M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 5 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 512MB, type WB
[ 0.000000] reg 3, base: 4GB, range: 512MB, type WB
[ 0.000000] reg 4, base: 4592MB, range: 16MB, type UC
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd710-0x000fd71f] mapped at [ffff8800000fd710]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x021fc000, 0x021fcfff] PGTABLE
[ 0.000000] BRK [0x021fd000, 0x021fdfff] PGTABLE
[ 0.000000] BRK [0x021fe000, 0x021fefff] PGTABLE
[ 0.000000] BRK [0x021ff000, 0x021fffff] PGTABLE
[ 0.000000] BRK [0x02200000, 0x02200fff] PGTABLE
[ 0.000000] BRK [0x02201000, 0x02201fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x33dea000-0x35eecfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000DF213078 00006C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DF21F988 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000DF213178 00C80C (v02 ALASKA A M I 00000088 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000DF244080 000040
[ 0.000000] ACPI: APIC 0x00000000DF21FA98 000062 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DF21FB00 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000DF21FB48 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DF220088 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
[ 0.000000] ACPI: MCFG 0x00000000DF220B60 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DF220BA0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DF220BD8 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DF220F48 0034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x11eff7000-0x11effbfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000011effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cecf6fff]
[ 0.000000] node 0: [mem 0x00000000cecfe000-0x00000000cf4d0fff]
[ 0.000000] node 0: [mem 0x00000000cf6ea000-0x00000000df0b1fff]
[ 0.000000] node 0: [mem 0x00000000df14a000-0x00000000df18ffff]
[ 0.000000] node 0: [mem 0x00000000df7ff000-0x00000000df7fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000011effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011effffff]
[ 0.000000] On node 0 totalpages: 1039989
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14204 pages used for memmap
[ 0.000000] DMA32 zone: 909017 pages, LIFO batch:31
[ 0.000000] Normal zone: 1984 pages used for memmap
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcecf7000-0xcecfdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf4d1000-0xcf6e9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf0b2000-0xdf149fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf190000-0xdf245fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf246000-0xdf7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88011ec00000 s97496 r8192 d29480 u1048576
[ 0.000000] pcpu-alloc: s97496 r8192 d29480 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1023716
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-7-generic root=UUID=105f6876-45d0-48e9-ac32-325dffeebc95 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3975488K/4159956K available (8290K kernel code, 1274K rwdata, 3912K rodata, 1472K init, 1292K bss, 184468K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16640 nr_irqs:440 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3192.670 MHz processor
[ 0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.34 BogoMIPS (lpj=12770680)
[ 0.000025] pid_max: default: 32768 minimum: 301
[ 0.000029] ACPI: Core revision 20150930
[ 0.007553] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.007569] Security Framework initialized
[ 0.007570] Yama: becoming mindful.
[ 0.007579] AppArmor: AppArmor initialized
[ 0.007773] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008727] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009164] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.009168] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.009331] Initializing cgroup subsys io
[ 0.009334] Initializing cgroup subsys memory
[ 0.009338] Initializing cgroup subsys devices
[ 0.009340] Initializing cgroup subsys freezer
[ 0.009342] Initializing cgroup subsys net_cls
[ 0.009344] Initializing cgroup subsys perf_event
[ 0.009345] Initializing cgroup subsys net_prio
[ 0.009347] Initializing cgroup subsys hugetlb
[ 0.009349] Initializing cgroup subsys pids
[ 0.009366] CPU: Physical Processor ID: 0
[ 0.009367] CPU: Processor Core ID: 0
[ 0.010125] mce: CPU supports 7 MCE banks
[ 0.010135] CPU0: Thermal monitoring enabled (TM1)
[ 0.010141] process: using mwait in idle threads
[ 0.010144] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.010144] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.010411] Freeing SMP alternatives memory: 28K (ffffffff820b0000 - ffffffff820b7000)
[ 0.011975] ftrace: allocating 31762 entries in 125 pages
[ 0.022300] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.061988] TSC deadline timer enabled
[ 0.061990] smpboot: CPU0: Intel(R) Pentium(R) CPU G3250 @ 3.20GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.062014] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.062030] ... version: 3
[ 0.062031] ... bit width: 48
[ 0.062032] ... generic registers: 8
[ 0.062032] ... value mask: 0000ffffffffffff
[ 0.062033] ... max period: 0000ffffffffffff
[ 0.062033] ... fixed-purpose events: 3
[ 0.062034] ... event mask: 00000007000000ff
[ 0.062595] x86: Booting SMP configuration:
[ 0.062596] .... node #0, CPUs: #1
[ 0.063767] microcode: CPU1 microcode updated early to revision 0x1e, date = 2015-08-13
[ 0.066609] x86: Booted up 1 node, 2 CPUs
[ 0.066611] smpboot: Total of 2 processors activated (12770.68 BogoMIPS)
[ 0.066636] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.067934] devtmpfs: initialized
[ 0.069260] evm: security.selinux
[ 0.069261] evm: security.SMACK64
[ 0.069262] evm: security.SMACK64EXEC
[ 0.069263] evm: security.SMACK64TRANSMUTE
[ 0.069263] evm: security.SMACK64MMAP
[ 0.069264] evm: security.ima
[ 0.069264] evm: security.capability
[ 0.069306] PM: Registering ACPI NVS region [mem 0xcecf7000-0xcecfdfff] (28672 bytes)
[ 0.069307] PM: Registering ACPI NVS region [mem 0xdf190000-0xdf245fff] (745472 bytes)
[ 0.069362] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.069417] pinctrl core: initialized pinctrl subsystem
[ 0.069500] RTC time: 5:02:16, date: 03/12/16
[ 0.069580] NET: Registered protocol family 16
[ 0.078629] cpuidle: using governor ladder
[ 0.090636] cpuidle: using governor menu
[ 0.090639] PCCT header not found.
[ 0.090681] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.090682] ACPI: bus type PCI registered
[ 0.090683] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.090729] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.090730] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.090737] PCI: Using configuration type 1 for base access
[ 0.090875] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.090880] perf_event_intel: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[ 0.102862] ACPI: Added _OSI(Module Device)
[ 0.102864] ACPI: Added _OSI(Processor Device)
[ 0.102864] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.102865] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.105459] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.107185] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.107665] ACPI: Dynamic OEM Table Load:
[ 0.107669] ACPI: SSDT 0xFFFF88011A08FC00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.108100] ACPI: Dynamic OEM Table Load:
[ 0.108103] ACPI: SSDT 0xFFFF88011A014000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.108560] ACPI: Dynamic OEM Table Load:
[ 0.108562] ACPI: SSDT 0xFFFF8801195A4200 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.109107] ACPI: Interpreter enabled
[ 0.109113] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[ 0.109117] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[ 0.109129] ACPI: (supports S0 S3 S4 S5)
[ 0.109130] ACPI: Using IOAPIC for interrupt routing
[ 0.109147] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.114799] ACPI: Power Resource [FN00] (off)
[ 0.114851] ACPI: Power Resource [FN01] (off)
[ 0.114900] ACPI: Power Resource [FN02] (off)
[ 0.114949] ACPI: Power Resource [FN03] (off)
[ 0.114997] ACPI: Power Resource [FN04] (off)
[ 0.115500] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.115504] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.115648] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.115729] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.115730] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.115970] PCI host bridge to bus 0000:00
[ 0.115972] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.115974] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.115975] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.115976] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.115977] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.115978] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.115979] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.115979] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.115980] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.115981] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[ 0.115983] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.115988] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.116049] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.116074] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.116128] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.116173] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.116195] pci 0000:00:14.0: reg 0x10: [mem 0xf7200000-0xf720ffff 64bit]
[ 0.116238] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.116263] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.116289] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.116311] pci 0000:00:16.0: reg 0x10: [mem 0xf721a000-0xf721a00f 64bit]
[ 0.116357] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.116411] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.116435] pci 0000:00:1a.0: reg 0x10: [mem 0xf7218000-0xf72183ff]
[ 0.116498] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.116533] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.116559] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.116580] pci 0000:00:1b.0: reg 0x10: [mem 0xf7210000-0xf7213fff 64bit]
[ 0.116629] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.116656] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.116681] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.116734] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.116781] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.116807] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.116860] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.116906] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.116930] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[ 0.116983] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.117028] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.117058] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.117082] pci 0000:00:1d.0: reg 0x10: [mem 0xf7217000-0xf72173ff]
[ 0.117145] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.117178] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.117205] pci 0000:00:1f.0: [8086:8c5c] type 00 class 0x060100
[ 0.117336] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.117353] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
[ 0.117359] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
[ 0.117364] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
[ 0.117370] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
[ 0.117376] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.117382] pci 0000:00:1f.2: reg 0x24: [mem 0xf7216000-0xf72167ff]
[ 0.117404] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.117448] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.117461] pci 0000:00:1f.3: reg 0x10: [mem 0xf7215000-0xf72150ff 64bit]
[ 0.117477] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.117561] pci 0000:01:00.0: [10de:1401] type 00 class 0x030000
[ 0.117579] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.117588] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.117597] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.117603] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.117609] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.117657] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.117684] pci 0000:01:00.1: [10de:0fba] type 00 class 0x040300
[ 0.117701] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[ 0.122668] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.122670] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.122672] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.122674] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.122716] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.122773] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.122810] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.122836] pci 0000:03:00.0: reg 0x18: [mem 0xf7100000-0xf7100fff 64bit]
[ 0.122852] pci 0000:03:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[ 0.122918] pci 0000:03:00.0: supports D1 D2
[ 0.122919] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.122954] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.130673] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.130676] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.130678] pci 0000:00:1c.2: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.130682] pci 0000:00:1c.2: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.130738] pci 0000:04:00.0: [8086:244e] type 01 class 0x060401
[ 0.130852] pci 0000:04:00.0: supports D1 D2
[ 0.130853] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.130871] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.130891] pci 0000:00:1c.3: PCI bridge to [bus 04-05]
[ 0.131005] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.131600] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.131631] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.131661] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.131691] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.131721] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.131752] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.131781] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.131810] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.132000] ACPI: Enabled 4 GPEs in block 00 to 3F
7

Hi had to post twice, this is the second half of the dmesg, was to long

[ 0.132079] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.132081] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.132082] vgaarb: loaded
[ 0.132083] vgaarb: bridge control possible 0000:01:00.0
[ 0.132257] SCSI subsystem initialized
[ 0.132283] libata version 3.00 loaded.
[ 0.132298] ACPI: bus type USB registered
[ 0.132309] usbcore: registered new interface driver usbfs
[ 0.132315] usbcore: registered new interface driver hub
[ 0.132321] usbcore: registered new device driver usb
[ 0.132406] PCI: Using ACPI for IRQ routing
[ 0.133724] PCI: pci_cache_line_size set to 64 bytes
[ 0.133760] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.133761] e820: reserve RAM buffer [mem 0xcecf7000-0xcfffffff]
[ 0.133762] e820: reserve RAM buffer [mem 0xcf4d1000-0xcfffffff]
[ 0.133763] e820: reserve RAM buffer [mem 0xdf0b2000-0xdfffffff]
[ 0.133764] e820: reserve RAM buffer [mem 0xdf190000-0xdfffffff]
[ 0.133765] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[ 0.133766] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff]
[ 0.133844] NetLabel: Initializing
[ 0.133845] NetLabel: domain hash size = 128
[ 0.133845] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.133854] NetLabel: unlabeled traffic allowed by default
[ 0.133898] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.133901] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.136000] clocksource: Switched to clocksource hpet
[ 0.141337] AppArmor: AppArmor Filesystem Enabled
[ 0.141389] pnp: PnP ACPI init
[ 0.141467] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.141470] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.141586] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.141587] system 00:01: [io 0xffff] has been reserved
[ 0.141588] system 00:01: [io 0xffff] has been reserved
[ 0.141589] system 00:01: [io 0xffff] has been reserved
[ 0.141590] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.141591] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.141592] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.141593] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.141595] system 00:01: [io 0x1800-0x18fe] could not be reserved
[ 0.141596] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.141598] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.141615] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.141648] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.141650] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.141731] system 00:04: [io 0x0a00-0x0a0f] has been reserved
[ 0.141732] system 00:04: [io 0x0a30-0x0a3f] has been reserved
[ 0.141733] system 00:04: [io 0x0a20-0x0a2f] has been reserved
[ 0.141735] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.141894] pnp 00:05: [dma 0 disabled]
[ 0.141923] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.142101] pnp 00:06: [dma 0 disabled]
[ 0.142171] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.142201] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.142203] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.142479] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.142480] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.142481] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.142483] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.142484] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.142485] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.142486] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.142487] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.142488] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.142489] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.142490] system 00:08: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[ 0.142491] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.142493] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.142629] pnp: PnP ACPI: found 9 devices
[ 0.148347] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.148385] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.148386] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.148389] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.148390] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.148393] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.148401] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.148403] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.148406] pci 0000:00:1c.2: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.148409] pci 0000:00:1c.2: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.148413] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.148431] pci 0000:00:1c.3: PCI bridge to [bus 04-05]
[ 0.148440] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.148442] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.148443] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.148444] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.148445] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.148445] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.148446] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.148447] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.148448] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.148449] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]
[ 0.148450] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.148451] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.148452] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.148453] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.148454] pci_bus 0000:03: resource 1 [mem 0xf7100000-0xf71fffff]
[ 0.148455] pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.148478] NET: Registered protocol family 2
[ 0.148590] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.148658] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.148765] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.148787] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.148804] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.148846] NET: Registered protocol family 1
[ 0.184035] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.184046] PCI: CLS 64 bytes, default 64
[ 0.184081] Trying to unpack rootfs image as initramfs...
[ 0.549752] Freeing initrd memory: 33804K (ffff880033dea000 - ffff880035eed000)
[ 0.549765] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.549767] software IO TLB [mem 0xdb0b2000-0xdf0b2000] (64MB) mapped at [ffff8800db0b2000-ffff8800df0b1fff]
[ 0.549818] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.549819] hw unit of domain pp0-core 2^-14 Joules
[ 0.549819] hw unit of domain package 2^-14 Joules
[ 0.549820] hw unit of domain dram 2^-14 Joules
[ 0.549821] hw unit of domain pp1-gpu 2^-14 Joules
[ 0.549931] Scanning for low memory corruption every 60 seconds
[ 0.550162] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.550186] audit: initializing netlink subsys (disabled)
[ 0.550199] audit: type=2000 audit(1457758936.548:1): initialized
[ 0.550465] Initialise system trusted keyring
[ 0.550540] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.550541] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.551542] zbud: loaded
[ 0.551695] VFS: Disk quotas dquot_6.6.0
[ 0.551718] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.552049] fuse init (API version 7.23)
[ 0.552141] Key type big_key registered
[ 0.552388] Key type asymmetric registered
[ 0.552391] Asymmetric key parser 'x509' registered
[ 0.552415] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.552431] io scheduler noop registered
[ 0.552432] io scheduler deadline registered (default)
[ 0.552452] io scheduler cfq registered
[ 0.552870] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.552874] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.552900] intel_idle: MWAIT substates: 0x2120
[ 0.552901] intel_idle: v0.4 model 0x3C
[ 0.552902] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.553023] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.553026] ACPI: Power Button [PWRB]
[ 0.553051] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.553053] ACPI: Power Button [PWRF]
[ 0.553511] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.553512] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.553637] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.553638] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.553684] GHES: HEST is not enabled!
[ 0.553745] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.574119] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.575190] Linux agpgart interface v0.103
[ 0.576725] brd: module loaded
[ 0.577370] loop: module loaded
[ 0.577510] libphy: Fixed MDIO Bus: probed
[ 0.577511] tun: Universal TUN/TAP device driver, 1.6
[ 0.577512] tun: (C) 1999-2004 Max Krasnyansky
[ 0.577535] PPP generic driver version 2.4.2
[ 0.577569] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.577572] ehci-pci: EHCI PCI platform driver
[ 0.577648] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.577652] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.577662] ehci-pci 0000:00:1a.0: debug port 2
[ 0.581556] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.581563] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7218000
[ 0.592023] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.592071] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.592073] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.592074] usb usb1: Product: EHCI Host Controller
[ 0.592075] usb usb1: Manufacturer: Linux 4.4.0-7-generic ehci_hcd
[ 0.592075] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.592227] hub 1-0:1.0: USB hub found
[ 0.592231] hub 1-0:1.0: 2 ports detected
[ 0.592367] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.592371] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.592380] ehci-pci 0000:00:1d.0: debug port 2
[ 0.596264] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.596270] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7217000
[ 0.608034] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.608060] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.608062] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.608063] usb usb2: Product: EHCI Host Controller
[ 0.608064] usb usb2: Manufacturer: Linux 4.4.0-7-generic ehci_hcd
[ 0.608064] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.608208] hub 2-0:1.0: USB hub found
[ 0.608211] hub 2-0:1.0: 2 ports detected
[ 0.608290] ehci-platform: EHCI generic platform driver
[ 0.608298] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.608301] ohci-pci: OHCI PCI platform driver
[ 0.608307] ohci-platform: OHCI generic platform driver
[ 0.608312] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.608380] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.608383] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.609444] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 0.609447] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.609531] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.609533] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.609533] usb usb3: Product: xHCI Host Controller
[ 0.609534] usb usb3: Manufacturer: Linux 4.4.0-7-generic xhci-hcd
[ 0.609535] usb usb3: SerialNumber: 0000:00:14.0
[ 0.609679] hub 3-0:1.0: USB hub found
[ 0.609689] hub 3-0:1.0: 10 ports detected
[ 0.611249] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.611251] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.611268] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.611270] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.611270] usb usb4: Product: xHCI Host Controller
[ 0.611271] usb usb4: Manufacturer: Linux 4.4.0-7-generic xhci-hcd
[ 0.611272] usb usb4: SerialNumber: 0000:00:14.0
[ 0.611393] hub 4-0:1.0: USB hub found
[ 0.611399] hub 4-0:1.0: 2 ports detected
[ 0.611691] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.612057] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.612061] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.612234] mousedev: PS/2 mouse device common for all mice
[ 0.612372] rtc_cmos 00:02: RTC can wake from S4
[ 0.612492] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.612513] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.612518] i2c /dev entries driver
[ 0.612554] device-mapper: uevent: version 1.0.3
[ 0.612617] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: [email protected]
[ 0.612628] Intel P-state driver initializing.
[ 0.612739] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.613541] NET: Registered protocol family 10
[ 0.613932] NET: Registered protocol family 17
[ 0.613961] Key type dns_resolver registered
[ 0.614311] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x1e
[ 0.614341] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x1e
[ 0.614423] microcode: Microcode Update Driver: v2.01 , Peter Oruba
[ 0.614746] registered taskstats version 1
[ 0.614809] Loading compiled-in X.509 certificates
[ 0.617044] Loaded X.509 cert 'Build time autogenerated kernel key: f2c3ae67c0e1dcd8e497fb915b33a837ad42e570'
[ 0.617090] zswap: loaded using pool lzo/zbud
[ 0.620409] Key type trusted registered
[ 0.622414] Key type encrypted registered
[ 0.622420] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.622423] ima: No TPM chip found, activating TPM-bypass!
[ 0.622438] evm: HMAC attrs: 0x1
[ 0.622732] Magic number: 8:371:11
[ 0.622818] rtc_cmos 00:02: setting system clock to 2016-03-12 05:02:17 UTC (1457758937)
[ 0.622855] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.622855] EDD information not available.
[ 0.622912] PM: Hibernation image not present or could not be loaded.
[ 0.623693] Freeing unused kernel memory: 1472K (ffffffff81f40000 - ffffffff820b0000)
[ 0.623694] Write protecting the kernel read-only data: 14336k
[ 0.624070] Freeing unused kernel memory: 1940K (ffff88000181b000 - ffff880001a00000)
[ 0.624396] Freeing unused kernel memory: 184K (ffff880001dd2000 - ffff880001e00000)
[ 0.630345] random: systemd-udevd urandom read with 1 bits of entropy available
[ 0.659557] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.659564] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.661053] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 0.665023] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffc9000064c000, fc:aa:14:a3:a2:c6, XID 0c000800 IRQ 26
[ 0.665025] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.672242] ahci 0000:00:1f.2: version 3.0
[ 0.672339] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x12 impl SATA mode
[ 0.672341] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems
[ 0.684168] scsi host0: ahci
[ 0.687062] scsi host1: ahci
[ 0.687459] scsi host2: ahci
[ 0.687853] scsi host3: ahci
[ 0.688085] scsi host4: ahci
[ 0.688122] ata1: DUMMY
[ 0.688125] ata2: SATA max UDMA/133 abar m2048@0xf7216000 port 0xf7216180 irq 27
[ 0.688126] ata3: DUMMY
[ 0.688126] ata4: DUMMY
[ 0.688128] ata5: SATA max UDMA/133 abar m2048@0xf7216000 port 0xf7216300 irq 27
[ 0.689257] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 0.908021] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.920022] usb 3-4: new full-speed USB device number 2 using xhci_hcd
[ 0.920028] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.012030] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.012046] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.013726] ata2.00: ATAPI: Optiarc DVD RW AD-7260S, 1.03, max UDMA/100
[ 1.015729] ata2.00: configured for UDMA/100
[ 1.017619] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7260S 1.03 PQ: 0 ANSI: 5
[ 1.018155] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.018157] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.018159] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.023561] ata5.00: ATA-7: SAMSUNG HD161HJ, JF100-19, max UDMA7
[ 1.023563] ata5.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.029759] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.029762] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.029763] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.033622] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.033625] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.033713] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.033746] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 1.035145] ata5.00: configured for UDMA/133
[ 1.035288] scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD161HJ 0-19 PQ: 0 ANSI: 5
[ 1.035411] sd 4:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.035431] sd 4:0:0:0: [sda] Write Protect is off
[ 1.035433] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.035442] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.035557] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 1.040378] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 1.040390] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.040631] hub 1-1:1.0: USB hub found
[ 1.040728] hub 1-1:1.0: 4 ports detected
[ 1.052385] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.052387] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.052502] hub 2-1:1.0: USB hub found
[ 1.052604] hub 2-1:1.0: 6 ports detected
[ 1.057455] usb 3-4: New USB device found, idVendor=045e, idProduct=0768
[ 1.057466] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.057468] usb 3-4: Product: Microsoft® SiderWinderTM X4 Keyboard
[ 1.057469] usb 3-4: Manufacturer: Microsoft
[ 1.060050] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.064819] sda: sda1 sda2 < sda5 >
[ 1.065032] sd 4:0:0:0: [sda] Attached SCSI disk
[ 1.071595] usbcore: registered new interface driver usbhid
[ 1.071597] usbhid: USB HID core driver
[ 1.072606] input: Microsoft Microsoft® SiderWinderTM X4 Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:045E:0768.0001/input/input5
[ 1.128165] hid-generic 0003:045E:0768.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® SiderWinderTM X4 Keyboard] on usb-0000:00:14.0-4/input0
[ 1.130136] input: Microsoft Microsoft® SiderWinderTM X4 Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:045E:0768.0002/input/input6
[ 1.184172] hid-generic 0003:045E:0768.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Microsoft® SiderWinderTM X4 Keyboard] on usb-0000:00:14.0-4/input1
[ 1.224021] usb 3-7: new full-speed USB device number 3 using xhci_hcd
[ 1.355016] usb 3-7: New USB device found, idVendor=03f0, idProduct=a407
[ 1.355019] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.355020] usb 3-7: Product: HP Link-5 micro dongle
[ 1.355021] usb 3-7: Manufacturer: HP
[ 1.355169] usb 3-7: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.356662] input: HP HP Link-5 micro dongle as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/0003:03F0:A407.0003/input/input7
[ 1.412159] hid-generic 0003:03F0:A407.0003: input,hidraw2: USB HID v1.11 Keyboard [HP HP Link-5 micro dongle] on usb-0000:00:14.0-7/input0
[ 1.415254] input: HP HP Link-5 micro dongle as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.1/0003:03F0:A407.0004/input/input8
[ 1.468218] hid-generic 0003:03F0:A407.0004: input,hiddev0,hidraw3: USB HID v1.11 Mouse [HP HP Link-5 micro dongle] on usb-0000:00:14.0-7/input1
[ 1.548012] tsc: Refined TSC clocksource calibration: 3192.606 MHz
[ 1.548015] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e050166e04, max_idle_ns: 440795273449 ns
[ 2.548127] clocksource: Switched to clocksource tsc
[ 3.681598] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.921183] random: nonblocking pool is initialized
[ 4.515919] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[ 4.595997] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 4.596079] systemd[1]: Detected architecture x86-64.
[ 4.605523] systemd[1]: Set hostname to .
[ 5.656193] systemd[1]: Listening on udev Kernel Socket.
[ 5.656245] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.656262] systemd[1]: Listening on udev Control Socket.
[ 5.656344] systemd[1]: Created slice User and Session Slice.
[ 5.656363] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.656368] systemd[1]: Reached target User and Group Name Lookups.
[ 5.656373] systemd[1]: Reached target Remote File Systems (Pre).
[ 5.656378] systemd[1]: Reached target Remote File Systems.
[ 5.656422] systemd[1]: Listening on Journal Audit Socket.
[ 5.656498] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.656514] systemd[1]: Listening on Syslog Socket.
[ 5.656519] systemd[1]: Reached target Encrypted Volumes.
[ 5.657020] systemd[1]: Listening on Process Core Dump Socket.
[ 5.657045] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.657059] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 5.657125] systemd[1]: Created slice System Slice.
[ 5.657185] systemd[1]: Created slice system-getty.slice.
[ 5.657195] systemd[1]: Reached target Slices.
[ 5.657215] systemd[1]: Listening on Journal Socket.
[ 5.668015] systemd[1]: Starting Braille Device Support...
[ 5.668307] systemd[1]: Mounting Debug File System...
[ 5.668594] systemd[1]: Starting Journal Service...
[ 5.668866] systemd[1]: Starting Nameserver information manager...
[ 5.669158] systemd[1]: Mounting Huge Pages File System...
[ 5.669435] systemd[1]: Starting Uncomplicated firewall...
[ 5.832009] systemd[1]: Starting Load Kernel Modules...
[ 5.832329] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.833375] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 5.833682] systemd[1]: Started Read required files in advance.
[ 5.908605] systemd[1]: Started Uncomplicated firewall.
[ 5.977458] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 5.996010] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 5.997610] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.997639] systemd[1]: Mounted Debug File System.
[ 5.998080] systemd[1]: Mounted Huge Pages File System.
[ 6.356135] lp: driver loaded but no devices found
[ 6.387915] ppdev: user-space parallel port driver
[ 6.415964] systemd[1]: Started Nameserver information manager.
[ 6.436991] parport_pc 00:06: reported by Plug and Play ACPI
[ 6.437048] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
[ 6.532117] lp0: using parport0 (interrupt-driven).
[ 6.607173] systemd[1]: Started Load Kernel Modules.
[ 6.619990] systemd[1]: Starting Apply Kernel Variables...
[ 6.620342] systemd[1]: Mounting FUSE Control File System...
[ 6.621623] systemd[1]: Mounted FUSE Control File System.
[ 6.702217] systemd[1]: Started Journal Service.
[ 8.651847] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 8.738226] systemd-journald[212]: Received request to flush runtime journal from PID 1
[ 9.375149] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.698880] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 9.698886] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 9.751494] [drm] Initialized drm 1.1.0 20060810
[ 9.909961] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 9.909964] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.909965] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 9.909966] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
[ 9.909967] snd_hda_codec_realtek hdaudioC0D2: inputs:
[ 9.909968] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
[ 9.909969] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
[ 9.909970] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
[ 9.909971] snd_hda_codec_realtek hdaudioC0D2: CD=0x1c
[ 9.921368] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 9.921410] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 9.921443] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 9.921476] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 10.310819] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 10.310859] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 10.310890] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 10.310921] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 10.468812] intel_rapl: Found RAPL domain package
[ 10.468814] intel_rapl: Found RAPL domain core
[ 10.468815] intel_rapl: Found RAPL domain dram
[ 12.271305] Adding 4158460k swap on /dev/sda5. Priority:-1 extents:1 across:4158460k FS
[ 12.486422] nvidia: module license 'NVIDIA' taints kernel.
[ 12.486425] Disabling lock debugging due to kernel taint
[ 12.489949] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 12.493195] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 12.493279] nvidia-nvlink: Nvlink Core is being initialized, major device number 246
[ 12.493358] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[ 12.493361] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 358.16 Mon Nov 16 19:25:55 PST 2015
[ 12.593184] audit: type=1400 audit(1457758949.465:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=500 comm="apparmor_parser"
[ 12.593190] audit: type=1400 audit(1457758949.465:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=500 comm="apparmor_parser"
[ 12.704771] audit: type=1400 audit(1457758949.581:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=500 comm="apparmor_parser"
[ 12.704776] audit: type=1400 audit(1457758949.581:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=500 comm="apparmor_parser"
[ 12.704780] audit: type=1400 audit(1457758949.581:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=500 comm="apparmor_parser"
[ 12.704783] audit: type=1400 audit(1457758949.581:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=500 comm="apparmor_parser"
[ 12.752056] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 358.16 Mon Nov 16 18:58:09 PST 2015
[ 12.860865] audit: type=1400 audit(1457758949.733:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=500 comm="apparmor_parser"
[ 12.860871] audit: type=1400 audit(1457758949.733:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=500 comm="apparmor_parser"
[ 12.860874] audit: type=1400 audit(1457758949.733:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=500 comm="apparmor_parser"
[ 12.860877] audit: type=1400 audit(1457758949.733:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=500 comm="apparmor_parser"
[ 20.074421] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 20.158139] r8169 0000:03:00.0 enp3s0: link down
[ 20.158141] r8169 0000:03:00.0 enp3s0: link down
[ 20.158180] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 23.328934] r8169 0000:03:00.0 enp3s0: link up
[ 23.328941] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 23.534848] audit_printk_skb: 39 callbacks suppressed
[ 23.534850] audit: type=1400 audit(1457758960.409:25): apparmor="DENIED" operation="open" profile="/sbin/dhclient" name="/etc/ssl/openssl.cnf" pid=720 comm="dhclient" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 31.554852] nvidia-modeset: Allocated GPU:0 (GPU-e3c70c2a-156b-1a73-0a6f-ad3cf4d0e95c) @ PCI:0000:01:00.0
[ 31.891394] snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 13
8

All the distros you tried are off the same base so you really just tried the same distro over again.

You could try a different distro like Fedora and see what your results are.

But this sounds more like a hardwre problem. Does the computer have secure boot? Maybe disable that, though im not sure that it would cause this kind of problem.

It actually sounds like a power issue, but if as you say it works fine with only windows installed than somethings not right. Grub just tells the computer to go to the windows bootloader, it doesnt touch windows.

9

Thank you for your reply.
I will give Fedora a go as well. It's definitely not a hardware issue, I've since installed windows on a clean separate hard drive yo make use of the machine while diagnosing the linux installation.
Windows is running without a hickup.

NOTE: secure boot has been disabled.

Thanks.