Greetings all!
So my Sapphire RX 6800 XT Pulse is getting hotspot temps as high as 109C with the throttle temp being 110C. I have been looking for a block to put on this card but no one seems to have one. Bykski thinks they might but they need a photo of the circuit board layout. Sapphire support has yet to get back to me about that.
Does anyone have a circuit board photo of the Sapphire Pulse RX 6800 XT or know of a confirmed full-coverage water block for this card?
EK’s Should be compatible. Here is the compatibility list which list Sapphire cards. Compatibility list for EK-Quantum Vector N+ RX 6800XT/6900XT D-RGB - Nickel + Plexi | Liquid cooling compatibility list | EKWB
I would recommend researching/verifying with EK support first though.
Some other things you may want to look at is ambient temps and case air flow. If you the case isn’t able to breath then putting a water block on it may still not do much good.
Take it apart to get the photo and repaste it, will verify your factory paste job was good as well as get you the photo. (Might not need the block)
that is only for Nitro+ cards. EK does not support any Pulse cards from the RX 6000 series
This topic was automatically closed 273 days after the last reply. New replies are no longer allowed.