Dmesg output
[vagoo@manjaro ~]$ dmesg
[ 0.000000] microcode: microcode updated early to revision 0x24, date = 2018-01-21
[ 0.000000] Linux version 4.14.44-1-MANJARO (builduser@development) (gcc version 8.1.0 (GCC)) #1 SMP PREEMPT Fri May 25 18:35:59 UTC 2018
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.14-x86_64 root=/dev/mapper/main-root rw quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: ‘x87 floating point registers’
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: ‘SSE registers’
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: ‘AVX registers’
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using ‘standard’ format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c27a7fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c27a8000-0x00000000c27aefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c27af000-0x00000000c2bfcfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c2bfd000-0x00000000c320dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c320e000-0x00000000caf02fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000caf03000-0x00000000cb2acfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cb2ad000-0x00000000cb6b9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cb6ba000-0x00000000cb7f8fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cb7f9000-0x00000000cbf7ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cbf80000-0x00000000cbffefff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000cbfff000-0x00000000cbffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cd000000-0x00000000cf1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ESRT=0xcbf7e998 ACPI 2.0=0xcb7c2000 ACPI=0xcb7c2000 SMBIOS=0xcbf7e598
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: MSI MS-7922/ Z97S SLI Krait Edition (MS-7922), BIOS V10.7 02/16/2016
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x42fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000000] 1 base 0400000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 0420000000 mask 7FF0000000 write-back
[ 0.000000] 3 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 4 base 00D0000000 mask 7FF0000000 uncachable
[ 0.000000] 5 base 00CE000000 mask 7FFE000000 uncachable
[ 0.000000] 6 base 00CD000000 mask 7FFF000000 uncachable
[ 0.000000] 7 base 042FE00000 mask 7FFFE00000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: update [mem 0xcd000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcc000 max_arch_pfn = 0x400000000
[ 0.000000] esrt: Reserving ESRT space from 0x00000000cbf7e998 to 0x00000000cbf7e9d0.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff968400096000] 96000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x1ad63a000, 0x1ad63afff] PGTABLE
[ 0.000000] BRK [0x1ad63b000, 0x1ad63bfff] PGTABLE
[ 0.000000] BRK [0x1ad63c000, 0x1ad63cfff] PGTABLE
[ 0.000000] BRK [0x1ad63d000, 0x1ad63dfff] PGTABLE
[ 0.000000] BRK [0x1ad63e000, 0x1ad63efff] PGTABLE
[ 0.000000] BRK [0x1ad63f000, 0x1ad63ffff] PGTABLE
[ 0.000000] BRK [0x1ad640000, 0x1ad640fff] PGTABLE
[ 0.000000] BRK [0x1ad641000, 0x1ad641fff] PGTABLE
[ 0.000000] BRK [0x1ad642000, 0x1ad642fff] PGTABLE
[ 0.000000] BRK [0x1ad643000, 0x1ad643fff] PGTABLE
[ 0.000000] BRK [0x1ad644000, 0x1ad644fff] PGTABLE
[ 0.000000] BRK [0x1ad645000, 0x1ad645fff] PGTABLE
[ 0.000000] Secure boot could not be determined
[ 0.000000] RAMDISK: [mem 0x33a7f000-0x35d36fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000CB7C2000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000CB7C2088 00008C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000CB7D4D40 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000CB7C21A8 012B92 (v02 ALASKA A M I 00000023 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000CB7F8F80 000040
[ 0.000000] ACPI: APIC 0x00000000CB7D4E50 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000CB7D4EE8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x00000000CB7D4F30 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: ASF! 0x00000000CB7D4FD0 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: SSDT 0x00000000CB7D5078 000C7D (v02 Ther_R Ther_Rvp 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000CB7D5CF8 000539 (v02 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000CB7D6238 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 0x00000000CB7D6DB0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CB7D6DF0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000CB7D6E28 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000CB7D7198 005835 (v02 SaSsdt SaSsdt 00003000 INTL 20120711)
[ 0.000000] ACPI: UEFI 0x00000000CB7DC9D0 000042 (v01 ALASKA A M I 01072009 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000042fdfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x42fdfb000-0x42fdfefff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000042fdfffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c27a7fff]
[ 0.000000] node 0: [mem 0x00000000c27af000-0x00000000c2bfcfff]
[ 0.000000] node 0: [mem 0x00000000c320e000-0x00000000caf02fff]
[ 0.000000] node 0: [mem 0x00000000cb2ad000-0x00000000cb6b9fff]
[ 0.000000] node 0: [mem 0x00000000cbfff000-0x00000000cbffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000042fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000042fdfffff]
[ 0.000000] On node 0 totalpages: 4172437
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 27 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12916 pages used for memmap
[ 0.000000] DMA32 zone: 826617 pages, LIFO batch:31
[ 0.000000] Normal zone: 52216 pages used for memmap
[ 0.000000] Normal zone: 3341824 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc27a8000-0xc27aefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc2bfd000-0xc320dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcaf03000-0xcb2acfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb6ba000-0xcb7f8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb7f9000-0xcbf7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcbf80000-0xcbffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc000000-0xccffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcd000000-0xcf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x93/0x4d3 with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 42 pages/cpu @ffff96882fa00000 s134360 r8192 d29480 u262144
[ 0.000000] pcpu-alloc: s134360 r8192 d29480 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4107214
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.14-x86_64 root=/dev/mapper/main-root rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16236668K/16689748K available (10252K kernel code, 1162K rwdata, 2864K rodata, 1360K init, 988K bss, 453080K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 29480 entries in 116 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 8448, nr_irqs: 488, preallocated irqs: 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] spurious 8259A interrupt: IRQ7.
[ 0.003333] tsc: Detected 3499.772 MHz processor
[ 0.003333] Calibrating delay loop (skipped), value calculated using timer frequency… 7002.19 BogoMIPS (lpj=11665906)
[ 0.003333] pid_max: default: 32768 minimum: 301
[ 0.003333] ACPI: Core revision 20170728
[ 0.012519] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.013163] Security Framework initialized
[ 0.013163] Yama: becoming mindful.
[ 0.014761] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.015578] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.015610] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.015635] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.015752] CPU: Physical Processor ID: 0
[ 0.015753] CPU: Processor Core ID: 0
[ 0.015758] mce: CPU supports 9 MCE banks
[ 0.015763] CPU0: Thermal monitoring enabled (TM1)
[ 0.015772] process: using mwait in idle threads
[ 0.015773] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.015774] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.015775] Spectre V2 : Mitigation: Full generic retpoline
[ 0.015775] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.015775] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.015775] Speculative Store Bypass: Vulnerable
[ 0.016099] Freeing SMP alternatives memory: 24K
[ 0.017457] smpboot: Max logical packages: 2
[ 0.017780] …TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.050792] TSC deadline timer enabled
[ 0.050793] smpboot: CPU0: Intel® Core™ i7-4770K CPU @ 3.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.063336] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.063361] … version: 3
[ 0.063362] … bit width: 48
[ 0.063362] … generic registers: 4
[ 0.063362] … value mask: 0000ffffffffffff
[ 0.063363] … max period: 00007fffffffffff
[ 0.063363] … fixed-purpose events: 3
[ 0.063363] … event mask: 000000070000000f
[ 0.070001] Hierarchical SRCU implementation.
[ 0.083458] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.090001] smp: Bringing up secondary CPUs …
[ 0.116674] x86: Booting SMP configuration:
[ 0.116674] … node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.276942] smp: Brought up 1 node, 8 CPUs
[ 0.276942] smpboot: Total of 8 processors activated (56018.53 BogoMIPS)
[ 0.280289] devtmpfs: initialized
[ 0.280289] x86/mm: Memory block size: 128MB
[ 0.280623] PM: Registering ACPI NVS region [mem 0xc27a8000-0xc27aefff] (28672 bytes)
[ 0.280623] PM: Registering ACPI NVS region [mem 0xcb6ba000-0xcb7f8fff] (1306624 bytes)
[ 0.280623] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.280623] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.280623] pinctrl core: initialized pinctrl subsystem
[ 0.280623] RTC time: 16:07:28, date: 05/30/18
[ 0.280623] NET: Registered protocol family 16
[ 0.280623] cpuidle: using governor ladder
[ 0.280623] cpuidle: using governor menu
[ 0.280623] ACPI FADT declares the system doesn’t support PCIe ASPM, so disable it
[ 0.280623] ACPI: bus type PCI registered
[ 0.280623] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.280623] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.280623] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.280623] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.280623] PCI: Using configuration type 1 for base access
[ 0.280623] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.280623] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.280623] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.280623] ACPI: Added _OSI(Module Device)
[ 0.280623] ACPI: Added _OSI(Processor Device)
[ 0.280623] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.280623] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.280623] ACPI: Executed 6 blocks of module-level executable AML code
[ 0.285705] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.285705] ACPI: Dynamic OEM Table Load:
[ 0.285705] ACPI: SSDT 0xFFFF96881CCF9C00 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.285705] ACPI: Dynamic OEM Table Load:
[ 0.285705] ACPI: SSDT 0xFFFF96881D27A800 0005AA (v02 PmRef ApIst 00003000 INTL 20051117)
[ 0.286736] ACPI: Dynamic OEM Table Load:
[ 0.286739] ACPI: SSDT 0xFFFF96881D3C1A00 000119 (v02 PmRef ApCst 00003000 INTL 20051117)
[ 0.287728] ACPI: Interpreter enabled
[ 0.287750] ACPI: (supports S0 S3 S4 S5)
[ 0.287750] ACPI: Using IOAPIC for interrupt routing
[ 0.287768] PCI: Using host bridge windows from ACPI; if necessary, use “pci=nocrs” and report a bug
[ 0.287981] ACPI: Enabled 8 GPEs in block 00 to 3F
[ 0.288383] ACPI: Power Resource [PG00] (on)
[ 0.288555] ACPI: Power Resource [PG01] (on)
[ 0.288723] ACPI: Power Resource [PG02] (on)
[ 0.288723] ACPI: Power Resource [WRST] (off)
[ 0.288723] ACPI: Power Resource [WRST] (off)
[ 0.288723] ACPI: Power Resource [WRST] (off)
[ 0.288723] ACPI: Power Resource [WRST] (off)
[ 0.288723] ACPI: Power Resource [WRST] (off)
[ 0.288723] ACPI: Power Resource [WRST] (off)
[ 0.288799] ACPI: Power Resource [WRST] (off)
[ 0.288937] ACPI: Power Resource [WRST] (off)
[ 0.294281] ACPI: Power Resource [FN00] (off)
[ 0.294316] ACPI: Power Resource [FN01] (off)
[ 0.294350] ACPI: Power Resource [FN02] (off)
[ 0.294383] ACPI: Power Resource [FN03] (off)
[ 0.294416] ACPI: Power Resource [FN04] (off)
[ 0.294869] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.294872] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.295000] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.295074] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.295075] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.295208] acpi PNP0A08:00: host bridge window expanded to [mem 0xcf200000-0xfeafffff window]; [mem 0xfe101000-0xfe113fff window] ignored
[ 0.295315] PCI host bridge to bus 0000:00
[ 0.295317] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.295317] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.295318] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.295319] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.295320] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.295320] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.295321] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.295322] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.295322] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.295323] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.295324] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.295324] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff window]
[ 0.295325] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.295330] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.295380] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.295403] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.295460] pci 0000:00:02.0: [8086:0412] type 00 class 0x038000
[ 0.295466] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.295469] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.295471] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.295527] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.295532] pci 0000:00:03.0: reg 0x10: [mem 0xf7914000-0xf7917fff 64bit]
[ 0.295592] pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
[ 0.295608] pci 0000:00:14.0: reg 0x10: [mem 0xf7900000-0xf790ffff 64bit]
[ 0.295655] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.295695] pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
[ 0.295712] pci 0000:00:16.0: reg 0x10: [mem 0xf791d000-0xf791d00f 64bit]
[ 0.295763] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.295824] pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
[ 0.295842] pci 0000:00:1a.0: reg 0x10: [mem 0xf791b000-0xf791b3ff]
[ 0.295910] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.295952] pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
[ 0.295966] pci 0000:00:1b.0: reg 0x10: [mem 0xf7910000-0xf7913fff 64bit]
[ 0.296014] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.296070] pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
[ 0.296125] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.296193] pci 0000:00:1c.2: [8086:244e] type 01 class 0x060401
[ 0.296248] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.296314] pci 0000:00:1c.3: [8086:8c96] type 01 class 0x060400
[ 0.296369] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.296439] pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
[ 0.296456] pci 0000:00:1d.0: reg 0x10: [mem 0xf791a000-0xf791a3ff]
[ 0.296524] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.296568] pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
[ 0.296696] pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
[ 0.296709] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.296714] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.296720] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.296725] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.296731] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.296737] pci 0000:00:1f.2: reg 0x24: [mem 0xf7919000-0xf79197ff]
[ 0.296764] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.296800] pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
[ 0.296814] pci 0000:00:1f.3: reg 0x10: [mem 0xf7918000-0xf79180ff 64bit]
[ 0.296830] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.296903] pci 0000:01:00.0: [10de:13c2] type 00 class 0x030000
[ 0.296919] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.296927] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.296935] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.296940] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.296946] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.296954] pci 0000:01:00.0: BAR 1: assigned to efifb
[ 0.297020] pci 0000:01:00.1: [10de:0fbb] type 00 class 0x040300
[ 0.297031] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[ 0.306679] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.306681] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.306682] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.306684] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.306733] acpiphp: Slot [1] registered
[ 0.306737] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.306801] pci 0000:03:00.0: [1b21:1080] type 01 class 0x060400
[ 0.306928] pci 0000:03:00.0: supports D1 D2
[ 0.306929] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.316678] pci 0000:00:1c.2: PCI bridge to [bus 03-04] (subtractive decode)
[ 0.316685] pci 0000:00:1c.2: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.316686] pci 0000:00:1c.2: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.316686] pci 0000:00:1c.2: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.316687] pci 0000:00:1c.2: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[ 0.316688] pci 0000:00:1c.2: bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode)
[ 0.316688] pci 0000:00:1c.2: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[ 0.316689] pci 0000:00:1c.2: bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode)
[ 0.316690] pci 0000:00:1c.2: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.316691] pci 0000:00:1c.2: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.316691] pci 0000:00:1c.2: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.316692] pci 0000:00:1c.2: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.316693] pci 0000:00:1c.2: bridge window [mem 0xcf200000-0xfeafffff window] (subtractive decode)
[ 0.316793] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.316874] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 0.316901] pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.316926] pci 0000:05:00.0: reg 0x18: [mem 0xf7800000-0xf7800fff 64bit]
[ 0.316941] pci 0000:05:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[ 0.317026] pci 0000:05:00.0: supports D1 D2
[ 0.317027] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.326683] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.326686] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.326689] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.326693] pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.327245] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.327275] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.327304] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.327332] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.327360] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.327387] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.327415] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.327442] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.327649] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.327649] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.327649] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.327649] vgaarb: loaded
[ 0.327649] EDAC MC: Ver: 3.0.0
[ 0.327649] Registered efivars operations
[ 0.330007] PCI: Using ACPI for IRQ routing
[ 0.331106] PCI: pci_cache_line_size set to 64 bytes
[ 0.331140] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.331140] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.331141] e820: reserve RAM buffer [mem 0xc27a8000-0xc3ffffff]
[ 0.331142] e820: reserve RAM buffer [mem 0xc2bfd000-0xc3ffffff]
[ 0.331142] e820: reserve RAM buffer [mem 0xcaf03000-0xcbffffff]
[ 0.331143] e820: reserve RAM buffer [mem 0xcb6ba000-0xcbffffff]
[ 0.331143] e820: reserve RAM buffer [mem 0x42fe00000-0x42fffffff]
[ 0.331186] NetLabel: Initializing
[ 0.331186] NetLabel: domain hash size = 128
[ 0.331186] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.331193] NetLabel: unlabeled traffic allowed by default
[ 0.331201] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.331201] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.333345] clocksource: Switched to clocksource hpet
[ 0.338388] VFS: Disk quotas dquot_6.6.0
[ 0.338397] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.338426] pnp: PnP ACPI init
[ 0.338493] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.338496] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.338559] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.338561] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.338572] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.338590] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.338592] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.338682] system 00:04: [io 0x0a00-0x0a1f] has been reserved
[ 0.338683] system 00:04: [io 0x0a20-0x0a2f] has been reserved
[ 0.338684] system 00:04: [io 0x0a30-0x0a3f] has been reserved
[ 0.338686] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.338720] pnp 00:05: Plug and Play ACPI device, IDs PNP0f03 (active)
[ 0.338791] pnp 00:06: [dma 0 disabled]
[ 0.338815] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.338952] pnp 00:07: [dma 0 disabled]
[ 0.339000] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.339026] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.339028] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.339227] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.339228] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.339229] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.339230] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.339231] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.339232] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.339233] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.339234] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.339235] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[ 0.339236] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.339237] system 00:09: [mem 0xf7fc0000-0xf7fcffff] has been reserved
[ 0.339238] system 00:09: [mem 0xf7ff0000-0xf7ffffff] has been reserved
[ 0.339240] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.339341] pnp: PnP ACPI: found 10 devices
[ 0.344832] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.344862] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.344863] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.344865] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.344866] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.344869] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.344876] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.344891] pci 0000:00:1c.2: PCI bridge to [bus 03-04]
[ 0.344899] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.344900] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.344904] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.344906] pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.344911] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.344912] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.344912] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.344913] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.344914] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.344915] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.344915] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.344916] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.344917] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.344917] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.344918] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.344919] pci_bus 0000:00: resource 15 [mem 0xcf200000-0xfeafffff window]
[ 0.344920] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.344920] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.344921] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.344922] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
[ 0.344923] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
[ 0.344924] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.344924] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.344925] pci_bus 0000:03: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.344926] pci_bus 0000:03: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.344926] pci_bus 0000:03: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.344927] pci_bus 0000:03: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.344928] pci_bus 0000:03: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.344929] pci_bus 0000:03: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.344929] pci_bus 0000:03: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.344930] pci_bus 0000:03: resource 15 [mem 0xcf200000-0xfeafffff window]
[ 0.344931] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.344932] pci_bus 0000:05: resource 1 [mem 0xf7800000-0xf78fffff]
[ 0.344932] pci_bus 0000:05: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.344991] NET: Registered protocol family 2
[ 0.345068] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.345167] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.345246] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.345267] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.345292] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.345336] NET: Registered protocol family 1
[ 0.345623] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.345634] PCI: CLS 64 bytes, default 64
[ 0.345651] Unpacking initramfs…
[ 0.642239] Freeing initrd memory: 35552K
[ 0.642244] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.642246] software IO TLB [mem 0xbe7a8000-0xc27a8000] (64MB) mapped at [ffff9684be7a8000-ffff9684c27a7fff]
[ 0.642453] Scanning for low memory corruption every 60 seconds
[ 0.642787] Initialise system trusted keyrings
[ 0.642792] Key type blacklist registered
[ 0.642823] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[ 0.643329] zbud: loaded
[ 0.644279] Key type asymmetric registered
[ 0.644295] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.644318] io scheduler noop registered
[ 0.644318] io scheduler deadline registered
[ 0.644337] io scheduler cfq registered
[ 0.644338] io scheduler mq-deadline registered
[ 0.644338] io scheduler kyber registered
[ 0.644348] io scheduler bfq registered
[ 0.644359] io scheduler bfq-sq registered (default)
[ 0.644359] BFQ I/O-scheduler: v8r12 (with cgroups support)
[ 0.644369] io scheduler bfq-mq registered
[ 0.644369] BFQ I/O-scheduler: v8r12 (with cgroups support)
[ 0.644710] efifb: probing for efifb
[ 0.644717] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
[ 0.644718] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.644718] efifb: scrolling: redraw
[ 0.644719] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.645821] Console: switching to colour frame buffer device 128x48
[ 0.646869] fb0: EFI VGA frame buffer device
[ 0.646874] intel_idle: MWAIT substates: 0x42120
[ 0.646874] intel_idle: v0.4.1 model 0x3C
[ 0.647041] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.647266] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.667777] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.668504] rtc_cmos 00:02: RTC can wake from S4
[ 0.668613] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.668634] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.668641] intel_pstate: Intel P-state driver initializing
[ 0.669127] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.669228] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[ 0.669756] NET: Registered protocol family 10
[ 0.679137] Segment Routing with IPv6
[ 0.679189] NET: Registered protocol family 17
[ 0.680464] RAS: Correctable Errors collector initialized.
[ 0.680570] microcode: sig=0x306c3, pf=0x2, revision=0x24
[ 0.680900] microcode: Microcode Update Driver: v2.2.
[ 0.680920] sched_clock: Marking stable (680886404, 0)->(680502255, 384149)
[ 0.681503] registered taskstats version 1
[ 0.681514] Loading compiled-in X.509 certificates
[ 0.681553] zswap: loaded using pool lzo/zbud
[ 0.687711] Key type big_key registered
[ 0.688562] Magic number: 2:12:137
[ 0.688706] rtc_cmos 00:02: setting system clock to 2018-05-30 16:07:28 UTC (1527696448)
[ 0.691880] Freeing unused kernel memory: 1360K
[ 0.691881] Write protecting the kernel read-only data: 16384k
[ 0.692572] Freeing unused kernel memory: 2016K
[ 0.695609] Freeing unused kernel memory: 1232K
[ 0.747051] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
[ 0.747052] i8042: PNP: PS/2 controller doesn’t have KBD irq; using default 1
[ 0.749517] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.749536] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.753746] ACPI: bus type USB registered
[ 0.753762] usbcore: registered new interface driver usbfs
[ 0.753769] usbcore: registered new interface driver hub
[ 0.753793] usbcore: registered new device driver usb
[ 0.754995] SCSI subsystem initialized
[ 0.755240] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 0.756471] ehci-pci: EHCI PCI platform driver
[ 0.756608] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.756613] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.756623] ehci-pci 0000:00:1a.0: debug port 2
[ 0.757309] AVX2 version of gcm_enc/dec engaged.
[ 0.757310] AES CTR mode by8 optimization enabled
[ 0.758467] libata version 3.00 loaded.
[ 0.760528] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.760541] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf791b000
[ 0.773350] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.773495] hub 1-0:1.0: USB hub found
[ 0.773499] hub 1-0:1.0: 2 ports detected
[ 0.773672] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.773674] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.773682] ehci-pci 0000:00:1d.0: debug port 2
[ 0.777587] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.777596] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf791a000
[ 0.790092] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.790305] hub 2-0:1.0: USB hub found
[ 0.790309] hub 2-0:1.0: 2 ports detected
[ 0.790525] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.790529] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.791607] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 0.791611] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.791798] hub 3-0:1.0: USB hub found
[ 0.791815] hub 3-0:1.0: 14 ports detected
[ 0.794767] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.794769] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.794772] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.794916] hub 4-0:1.0: USB hub found
[ 0.794927] hub 4-0:1.0: 6 ports detected
[ 0.796353] ahci 0000:00:1f.2: version 3.0
[ 0.796470] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.796505] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 0.796507] ahci 0000:00:1f.2: flags: 64bit ncq stag led clo pio slum part ems sxs apst
[ 0.844174] scsi host0: ahci
[ 0.844415] scsi host1: ahci
[ 0.844593] scsi host2: ahci
[ 0.844758] scsi host3: ahci
[ 0.844925] scsi host4: ahci
[ 0.845082] scsi host5: ahci
[ 0.845142] ata1: SATA max UDMA/133 abar m2048@0xf7919000 port 0xf7919100 irq 25
[ 0.845145] ata2: SATA max UDMA/133 abar m2048@0xf7919000 port 0xf7919180 irq 25
[ 0.845147] ata3: SATA max UDMA/133 abar m2048@0xf7919000 port 0xf7919200 irq 25
[ 0.845150] ata4: SATA max UDMA/133 abar m2048@0xf7919000 port 0xf7919280 irq 25
[ 0.845151] ata5: SATA max UDMA/133 abar m2048@0xf7919000 port 0xf7919300 irq 25
[ 0.845154] ata6: SATA max UDMA/133 abar m2048@0xf7919000 port 0xf7919380 irq 25
[ 1.103409] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.120078] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.123408] usb 3-3: new high-speed USB device number 2 using xhci_hcd
[ 1.156964] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.157831] ata1.00: ATA-9: ST3000DM001-1ER166, CC25, max UDMA/133
[ 1.157834] ata1.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.158709] ata1.00: configured for UDMA/133
[ 1.158900] scsi 0:0:0:0: Direct-Access ATA ST3000DM001-1ER1 CC25 PQ: 0 ANSI: 5
[ 1.250812] hub 1-1:1.0: USB hub found
[ 1.250911] hub 1-1:1.0: 6 ports detected
[ 1.264038] hub 3-3:1.0: USB hub found
[ 1.264068] hub 3-3:1.0: 3 ports detected
[ 1.267401] hub 2-1:1.0: USB hub found
[ 1.267493] hub 2-1:1.0: 8 ports detected
[ 1.386831] usb 4-3: new SuperSpeed USB device number 2 using xhci_hcd
[ 1.408070] usb-storage 4-3:1.0: USB Mass Storage device detected
[ 1.408269] scsi host6: usb-storage 4-3:1.0
[ 1.408406] usbcore: registered new interface driver usb-storage
[ 1.409631] usbcore: registered new interface driver uas
[ 1.473408] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.526760] usb 3-4: new full-speed USB device number 3 using xhci_hcd
[ 1.650093] tsc: Refined TSC clocksource calibration: 3499.996 MHz
[ 1.650101] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x32734d20948, max_idle_ns: 440795306379 ns
[ 1.675076] hidraw: raw HID events driver © Jiri Kosina
[ 1.682949] usbcore: registered new interface driver usbhid
[ 1.682950] usbhid: USB HID core driver
[ 1.684496] input: E-Signal USB Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:04D9:A002.0001/input/input2
[ 1.740130] usb 3-3.3: new low-speed USB device number 4 using xhci_hcd
[ 1.740285] hid-generic 0003:04D9:A002.0001: input,hidraw0: USB HID v1.10 Keyboard [E-Signal USB Gaming Keyboard] on usb-0000:00:14.0-4/input0
[ 1.740944] input: E-Signal USB Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:04D9:A002.0002/input/input3
[ 1.787219] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.797128] hid-generic 0003:04D9:A002.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [E-Signal USB Gaming Keyboard] on usb-0000:00:14.0-4/input1
[ 1.797496] hid-generic 0003:04D9:A002.0003: hiddev1,hidraw2: USB HID v1.10 Device [E-Signal USB Gaming Keyboard] on usb-0000:00:14.0-4/input2
[ 1.801924] ata3.00: ATA-8: KINGSTON SV300S37A480G, 520ABBF0, max UDMA/133
[ 1.801929] ata3.00: 937703088 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.811749] ata3.00: configured for UDMA/133
[ 1.812058] scsi 2:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
[ 1.956807] usb 3-5: new full-speed USB device number 5 using xhci_hcd
[ 2.127402] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.139537] ata4.00: ATA-8: KINGSTON SV300S37A120G, 541ABBF0, max UDMA/133
[ 2.139543] ata4.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.149500] ata4.00: configured for UDMA/133
[ 2.149832] scsi 3:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
[ 2.220139] usb 3-10: new full-speed USB device number 6 using xhci_hcd
[ 2.366997] input: Mad Catz Mad Catz M.M.O.7 Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/0003:0738:1713.0004/input/input4
[ 2.367164] hid-generic 0003:0738:1713.0004: input,hidraw3: USB HID v1.11 Mouse [Mad Catz Mad Catz M.M.O.7 Mouse] on usb-0000:00:14.0-10/input0
[ 2.424459] scsi 6:0:0:0: Direct-Access WD Elements 1042 1007 PQ: 0 ANSI: 6
[ 2.428637] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 2.428639] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.428650] sd 0:0:0:0: [sda] Write Protect is off
[ 2.428651] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.428659] sd 2:0:0:0: [sdb] 937703088 512-byte logical blocks: (480 GB/447 GiB)
[ 2.428671] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 2.428673] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.428674] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.428687] sd 3:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 2.428693] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 2.428698] sd 3:0:0:0: [sdc] Write Protect is off
[ 2.428699] random: fast init done
[ 2.428700] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.428716] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 2.428829] sd 6:0:0:0: [sdd] 976769024 512-byte logical blocks: (500 GB/466 GiB)
[ 2.429045] sd 6:0:0:0: [sdd] Write Protect is off
[ 2.429046] sd 6:0:0:0: [sdd] Mode Sense: 47 00 10 08
[ 2.429254] sd 6:0:0:0: [sdd] No Caching mode page found
[ 2.429269] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 2.430836] sdc: sdc1 sdc2 sdc3 sdc4
[ 2.431134] sd 3:0:0:0: [sdc] Attached SCSI removable disk
[ 2.431908] sdb: sdb1 sdb2
[ 2.432152] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 2.463780] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.464222] sda: sda1 sda2
[ 2.464346] ata5.00: ATA-8: ST3000DM001-9YN166, CC4C, max UDMA/133
[ 2.464347] ata5.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.464572] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 2.464888] ata5.00: configured for UDMA/133
[ 2.464917] scsi 4:0:0:0: Direct-Access ATA ST3000DM001-9YN1 CC4C PQ: 0 ANSI: 5
[ 2.465108] sd 4:0:0:0: [sde] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 2.465109] sd 4:0:0:0: [sde] 4096-byte physical blocks
[ 2.465146] sd 4:0:0:0: [sde] Write Protect is off
[ 2.465147] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 2.465235] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 2.493435] usb 3-12: new full-speed USB device number 7 using xhci_hcd
[ 2.503982] sde:
[ 2.504597] sd 4:0:0:0: [sde] Attached SCSI removable disk
[ 2.636532] input: audio-technica AT2020USB+ as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12:1.3/0003:0909:001C.0005/input/input5
[ 2.663578] clocksource: Switched to clocksource tsc
[ 2.690258] hid-generic 0003:0909:001C.0005: input,hiddev2,hidraw4: USB HID v1.00 Device [audio-technica AT2020USB+] on usb-0000:00:14.0-12/input3
[ 2.757953] sdd: sdd1 sdd2
[ 2.758960] sd 6:0:0:0: [sdd] Attached SCSI disk
[ 2.776794] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.777521] ata6.00: ATA-8: WDC WD3200AAKS-61L9A0, 01.03E01, max UDMA/133
[ 2.777523] ata6.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.778340] ata6.00: configured for UDMA/133
[ 2.778557] scsi 5:0:0:0: Direct-Access ATA WDC WD3200AAKS-6 3E01 PQ: 0 ANSI: 5
[ 2.779100] sd 5:0:0:0: [sdf] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.779187] sd 5:0:0:0: [sdf] Write Protect is off
[ 2.779190] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 2.779325] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 2.786147] sdf: sdf1
[ 2.786600] sd 5:0:0:0: [sdf] Attached SCSI removable disk
[ 2.819841] random: lvm: uninitialized urandom read (4 bytes read)
[ 3.421455] device-mapper: uevent: version 1.0.3
[ 3.421490] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: [email protected]
[ 3.422013] random: lvm: uninitialized urandom read (2 bytes read)
[ 3.565625] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.588260] random: crng init done
[ 3.643036] ip_tables: © 2000-2006 Netfilter Core Team
[ 3.646022] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[ 3.660266] systemd[1]: Detected architecture x86-64.
[ 3.662120] systemd[1]: Set hostname to .
[ 3.751724] systemd[1]: Listening on Process Core Dump Socket.
[ 3.752324] systemd[1]: Created slice system-getty.slice.
[ 3.752333] systemd[1]: Reached target Remote File Systems.
[ 3.752360] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.752448] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.752486] systemd[1]: Listening on Network Service Netlink Socket.
[ 3.752507] systemd[1]: Listening on udev Kernel Socket.
[ 3.763123] EXT4-fs (dm-1): re-mounted. Opts: data=ordered
[ 3.772161] ipmi message handler version 39.2
[ 3.772885] ipmi device interface
[ 3.821228] systemd-journald[304]: Received request to flush runtime journal from PID 1
[ 3.829095] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 3.829109] ACPI: Power Button [PWRB]
[ 3.829138] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7
[ 3.829142] ACPI: Sleep Button [SLPB]
[ 3.829166] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 3.829172] ACPI: Power Button [PWRF]
[ 3.838157] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.838347] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 3.843387] parport_pc 00:07: reported by Plug and Play ACPI
[ 3.843447] parport0: PC-style at 0x378, irq 5 [PCSPP]
[ 3.850568] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 3.850612] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.850613] ACPI: Thermal Zone [TZ00] (28 C)
[ 3.850851] thermal LNXTHERM:01: registered as thermal_zone1
[ 3.850851] ACPI: Thermal Zone [TZ01] (30 C)
[ 3.859296] nvidia: loading out-of-tree module taints kernel.
[ 3.859301] nvidia: module license ‘NVIDIA’ taints kernel.
[ 3.859301] Disabling lock debugging due to kernel taint
[ 3.893731] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170728/utaddress-247)
[ 3.893736] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.893739] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247)
[ 3.893742] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.893742] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170728/utaddress-247)
[ 3.893745] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247)
[ 3.893748] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.893748] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170728/utaddress-247)
[ 3.893751] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247)
[ 3.893753] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.893754] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 3.894004] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.894482] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 3.894502] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 3.903921] nvidia-nvlink: Nvlink Core is being initialized, major device number 243
[ 3.904128] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 3.904518] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 396.24 Thu Apr 26 00:10:09 PDT 2018 (using threaded interrupts)
[ 3.904551] mousedev: PS/2 mouse device common for all mice
[ 3.908313] Linux agpgart interface v0.103
[ 3.923967] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 3.923968] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 3.923969] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 3.923969] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 3.923969] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 3.926303] input: PC Speaker as /devices/platform/pcspkr/input/input11
[ 3.926770] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.926776] r8169 0000:05:00.0: can’t disable ASPM; OS doesn’t have ASPM control
[ 3.939660] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
[ 3.940975] r8169 0000:05:00.0 eth0: RTL8168g/8111g at 0xffffacadc1929000, d8:cb:8a:14:7d:bb, XID 0c000800 IRQ 27
[ 3.940977] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.942228] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 3.943932] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[ 3.943986] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 3.943991] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 3.952084] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 396.24 Wed Apr 25 23:54:18 PDT 2018
[ 3.953544] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 3.953545] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[ 3.966756] usbcore: registered new interface driver snd-usb-audio
[ 3.967101] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 3.967103] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.967105] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 3.967106] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 3.967107] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 3.967108] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 3.967109] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 3.967111] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 3.981036] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 3.981077] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 3.981114] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 3.981150] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 3.981186] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[ 3.981227] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
[ 3.981262] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
[ 3.981296] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[ 4.003521] ppdev: user-space parallel port driver
[ 4.004498] intel_rapl: Found RAPL domain package
[ 4.004499] intel_rapl: Found RAPL domain core
[ 4.004500] intel_rapl: Found RAPL domain uncore
[ 4.004501] intel_rapl: Found RAPL domain dram
[ 4.008848] iTCO_vendor_support: vendor-support=0
[ 4.009953] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.009982] iTCO_wdt: Found a 9 Series TCO device (Version=2, TCOBASE=0x1860)
[ 4.010054] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.023091] Adding 33554428k swap on /dev/mapper/main-swap. Priority:-2 extents:1 across:33554428k SSFS
[ 4.023301] r8169 0000:05:00.0 enp5s0: renamed from eth0
[ 4.050705] i915 0000:00:02.0: enabling device (0000 -> 0003)
[ 4.050890] [drm] Memory usable by graphics device = 2048M
[ 4.050891] checking generic (e0000000 300000) vs hw (d0000000 10000000)
[ 4.050892] [drm] Replacing VGA console driver
[ 4.056764] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.056764] [drm] Driver supports precise vblank timestamp query.
[ 4.060646] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 1
[ 4.090177] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 4.110116] [drm] Cannot find any crtc or sizes
[ 4.132830] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[ 4.132862] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21
[ 4.132885] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22
[ 4.132909] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input23
[ 4.132932] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input24
[ 4.431701] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: data=ordered
[ 4.587073] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input25
[ 4.587119] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input26
[ 4.587145] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input27
[ 4.587168] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input28
[ 4.719393] NET: Registered protocol family 3
[ 4.935603] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[ 5.005560] r8169 0000:05:00.0 enp5s0: link down
[ 5.005627] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[ 5.075073] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input10
[ 5.968448] nvidia-modeset: Allocated GPU:0 (GPU-b1b1af82-94c6-ff9f-a5c0-e133892f8b23) @ PCI:0000:01:00.0
[ 6.884941] hid-generic 0003:05AC:0000.0006: hiddev3,hidraw5: USB HID v1.11 Device [Apple Cinema HD Display] on usb-0000:00:14.0-3.3/input0
[ 7.145421] fuse init (API version 7.26)
[ 21.895494] r8169 0000:05:00.0 enp5s0: link up
[ 21.895509] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
[ 25.172179] r8169 0000:05:00.0 enp5s0: link down
[ 25.172230] r8169 0000:05:00.0 enp5s0: link down
[ 25.172259] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[ 25.312167] r8169 0000:05:00.0 enp5s0: link down
[ 25.312223] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[ 27.353156] 8021q: 802.1Q VLAN Support v1.8
[ 42.004477] r8169 0000:05:00.0 enp5s0: link up
[ 62.172169] r8169 0000:05:00.0 enp5s0: link down
[ 62.172178] r8169 0000:05:00.0 enp5s0: link down
[ 62.172241] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[ 79.130959] r8169 0000:05:00.0 enp5s0: link up
[ 101.100032] r8169 0000:05:00.0 enp5s0: link down
[ 102.868498] r8169 0000:05:00.0 enp5s0: link up
[ 103.034157] r8169 0000:05:00.0 enp5s0: link down
[ 104.666778] r8169 0000:05:00.0 enp5s0: link up
[ 108.155944] r8169 0000:05:00.0 enp5s0: link down
[ 109.861473] r8169 0000:05:00.0 enp5s0: link up