Is hdmi limiting me to 60Hz at 1680x1050?

I have a 1680x1050 60Hz monitor connected vie a HDMI to DVI cable ( HDMI is the video card and DVI to the monitor). Does setting 75Hz actually put through 75Hz to the monitor or is the hdmi side limiting it to 60Hz?

I don't believe that just setting something to run at a certain rate can make it work that way. Unless your monitor can handle the 75Hz it probably won't run at it. It would be no different than if you set it to 120Hz. Unless it can naturally run that speed than it probably can't. Now I will say that some monitors can be slightly overclocked. But usually not by much.

Since I am not an expert I will let someone else that is more knowledgeable on the forum handle to technical aspects of why or why not.

hmmmm. I understand what you are saying, however, when I try to overclock to 80Hz my monitor just says "input signal out of range" and it goes back to 75Hz

Strange. I'm thinking that maybe your monitor can handle it if it's backing down to 75Hz. But I don't know. Can you list the brand and model of your monitor as well as your graphics card?

That way if someone else sees this thread they might instantly know the answer you are looking for.

Yeah so my monitor is a 1680x1050 Hanns-G HZ221D and my graphics card is a7870 link here http://www.msi.com/product/vga/R7870-2GD5T.html

Why don't you just use a DVI cable?

basicly because I have 2 monitors. 1 DVI, another VGA. However, my graphics card has only DVI and HDMI. I could go DVI to DVI and HDMI to VGA but I told that was a bad idea, so instead I was told to do DVI graphics card to VGA monitor and HDMI graphics card to DVI monitor. Go ahead and comment if this is the wrong way to do it. I'd love to know

HDMI = DVI + audio. VGA can be converted from either.  The choke point is that your monitor is 60hz, not the interface.

I'm "overclocking" my monitor using a program called CRU, letting me to set it at a higher refresh rate than what it was originally intended for

Then I defer to the monitor overclockers.