I NEED HELP WITH TIMINGS - Crucial Ballistix 16 GB (2 x 8 GB) DDR4-3200 CL16 Memory & AORUS B450M

Hardware Hub
,
1

i need some help an advice on tighting my timings on my 2 sets of
Crucial Ballistix 16 GB (2 x 8 GB) DDR4-3200 CL16 Memory & gigabyte AORUS B450M

im currently running a 2933mhz i was at 3200mhz but found it more stable at 29.33
with 1.35v the current timings are 16-19-19-42 these are the default untouched

were should i start in adjusting i dont use xmp as it made the pc at
boot an main desktop load hang up more about 12sec extra at boot an 7 at desktop load after sign in
on pop os 21.04

without xmp it didnt hang up but the could be from not the best timings
note xmp hang up was same at 3200 also

so any help on this would help ?

thanks

2

I just tighten the primary timings in order.
Your 16 is probably close to as far as it can go, but the 19’s can probably drop a few points.

Here’s an outdated, but still useful reference for OCing ram: GitHub - integralfx/MemTestHelper: C# WPF to automate HCI MemTest

3

thanks

4

what’s your CPU, that’s where the memory controller is located

5

This topic was automatically closed 273 days after the last reply. New replies are no longer allowed.