How do I use VMs locally on ProxMox

I have gone down this route and it can work, just install the desktop
environment or window manager of your choice from the debian repositories on
the proxmox host. I have used both XFCE and Plasma, although I prefer XFCE for
stability and speed.

However I think there are some nicer options.

IF you do not need GPU acceleration, everyone’s favorite “reasonably secure
operating system” will serve you very well. Works on many AMD CPUs just fine,
take a look at the HCL.

So that is where it gets tricky because you would probably like to have a GPU
inside each VM with a GUI. You can certainly use a web browser and other basic
programs with software rendering but you have to accept reduced performance.
All modern browser and even office suites can make good use of the GPU for
rendering and other tasks as well.

This sounds easier than it actually is on a mobile platform because the dGPU is
frequently MUXed, which significantly complicates passthrough as the laptop can
only use either the iGPU or the dGPU at any given moment. Also dGPU usually
have many other drawbacks: power, heat, closed driver stack.

Take a look at what is involved:

[GUIDE] Optimus laptop dGPU passthrough

Correct. What OP is asking for meets the definition of a “virtbook”,
which is achievable on today’s hardware with SRIOV and Looking Glass, using
virt-manager to for VM configuration and management. Up to 7 GPU-accelerated
virtual machines, either Linux or Windows, with low latency graphics and input.

The link has an explanation and a guide for putting together a virtbook.
You may need different hardware than what you have now, but it is economical as
there are inexpensive platforms to be had on the second hand market. I am
publishing a new section of the guide each day as it is long and detailed.