Help with CX750M and GTX 770 SLI

Hardware Hub PSU
1

So, I'm building a new Rig and already bought most of the parts, except for the video cards, and I´m having some trouble trying to figure out if my psu will be able to handle the two 770s.

The psu itself has a 8 pin PCI-E modular plug and a 8 pin EPS 12v (I'm assuming its for a second CPU?) but it came with two pci 6 + 2 cables, and corsair says it's SLI supported, but I read that if I plug one of my 770s in the EPS12 plug I will fry my GPU and possibly my PSU because the pins locations are inverted.

What I want to know is, is there anyway to connect my 2 770s in this same PSU?

Thanks!

BTW: Sorry for the bad english :P

2

is the rear of your psu like this;

 

cxm750_backview.png800x445

If so then you should have been supplied enough pci-e cables (it state 4 on the corsair site). Use them and only them for your gpu's.

Dont go plugging the 8pin cpu power into a gpu that is going to kill your card.

Your are certainly pushing the limits of the psu if you intend to run sli 770's.

 

 

 

 

 

 

3

I would recommend getting a more powerful PSU just to be safe, but the CX750M does indeed have the plugs you need for SLI/Crossfire. I know cause I own it