Help to fix black screen after suspend on Ubuntu 15.10

Thoroniul · December 14, 2015, 10:04pm

I have been trying a large variety of things in order to get this fixed including trying different variations of linux.

It seems to be consistent in which waking up from sleep mode results in a black screen and inability to CTRL+ALT+F1 into another terminal.

The only two things I can do is to either power off, or too ssh into the computer.

Restarting lightdm did not remove the black screen.

Pressing the power button results in the shutting down animation being played, and then eventually being shut down.

Eden · December 16, 2015, 8:04pm

Whats graphics chip are you using?
Is the screen off completely or just the back-light?

rollymaster · December 16, 2015, 8:43pm

I've got the same issue
I've got mint 17.3 3570k z77 mobo gtx 660 kernel 4.2
(haven't tried to do this in quite some time)

konstantin · December 16, 2015, 9:11pm

Had a problem like this too, but with Mint 17.

My PC booted and then Turned Black after a minute, so i Reinstalled the Nvidia Drivers and it worked.

Thoroniul · December 17, 2015, 3:38pm

Nvidia 950M. The backlight does not turn off. It works if I completely disable the nvidia driver.

alexstan2T · December 21, 2015, 4:53am

Post a more detailed description of your current linux distribution and your system specifications / laptop part number / model / yahtzee! as whatever issue is keeping your system from fully waking from sleep can result from either driver issues, improper configuration and/or unset BIOS parameters such as invoking VGABIOS when waking.

P.S.: I have encountered a similar issue in the past, though i do not remember what system i was on or what i did to fix said issue. A good place to start is as always the log section of your current linux distribution, specifically, the x.org log file.

cotton · December 21, 2015, 5:14am

See if ctrl + alt + f7 gets you back to the GUI.

Thoroniul · December 22, 2015, 6:35pm

Sorry i did not get immediately back. Busy with Christmas and stuff.

It is an Asus 501KU laptop. Intel i7-6500U. Nvidia GTX 950m. The only options in the bios related to it is to enable/disable the dedicated graphics. Set the intel graphics memory size. And make the lid put stuff to sleep and wake up. I set it all to be correct. Im currently running 15.10 Xubuntu. If I run, any older version the kernel seems to not detect everything.

lspci:

00:00.0 Host bridge: Intel Corporation Sky Lake Host Bridge/DRAM Registers (rev 08)
00:02.0 VGA compatible controller: Intel Corporation Sky Lake Integrated Graphics (rev 07)
00:04.0 Signal processing controller: Intel Corporation Device 1903 (rev 08)
00:14.0 USB controller: Intel Corporation Device 9d2f (rev 21)
00:14.2 Signal processing controller: Intel Corporation Device 9d31 (rev 21)
00:15.0 Signal processing controller: Intel Corporation Device 9d60 (rev 21)
00:15.1 Signal processing controller: Intel Corporation Device 9d61 (rev 21)
00:16.0 Communication controller: Intel Corporation Device 9d3a (rev 21)
00:17.0 SATA controller: Intel Corporation Device 9d03 (rev 21)
00:1c.0 PCI bridge: Intel Corporation Device 9d10 (rev f1)
00:1c.4 PCI bridge: Intel Corporation Device 9d14 (rev f1)
00:1c.5 PCI bridge: Intel Corporation Device 9d15 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Device 9d48 (rev 21)
00:1f.2 Memory controller: Intel Corporation Device 9d21 (rev 21)
00:1f.3 Audio device: Intel Corporation Device 9d70 (rev 21)
00:1f.4 SMBus: Intel Corporation Device 9d23 (rev 21)
01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 950M] (rev a2)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)
03:00.0 Network controller: Intel Corporation Wireless 7265 (rev 59)

I'm not sure I need to post the entire lsmod, but I will anyway.

Module Size Used by
cmac 16384 2
rfcomm 69632 12
ctr 16384 1
ccm 20480 1
bbswitch 16384 0
binfmt_misc 20480 1
bnep 20480 2
nls_iso8859_1 16384 1
arc4 16384 2
drbg 32768 1
ansi_cprng 16384 0
dm_crypt 28672 1
snd_hda_codec_hdmi 49152 1
iwlmvm 294912 0
snd_hda_codec_conexant 24576 1
snd_hda_codec_generic 77824 1 snd_hda_codec_conexant
hid_generic 16384 0
mac80211 733184 1 iwlmvm
nvidia 8646656 33
intel_rapl 20480 0
snd_hda_intel 36864 3
snd_hda_codec 135168 4 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_codec_generic,snd_hda_intel
snd_hda_core 65536 5 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
x86_pkg_temp_thermal 16384 0
intel_powerclamp 16384 0
snd_hwdep 16384 1 snd_hda_codec
coretemp 16384 0
kvm_intel 167936 0
iwlwifi 200704 1 iwlmvm
snd_pcm 106496 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_core
i2c_designware_platform 16384 0
i2c_designware_core 16384 1 i2c_designware_platform
kvm 512000 1 kvm_intel
snd_seq_midi 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
cfg80211 548864 3 iwlwifi,mac80211,iwlmvm
crct10dif_pclmul 16384 0
crc32_pclmul 16384 0
aesni_intel 167936 2677
snd_rawmidi 32768 1 snd_seq_midi
aes_x86_64 20480 1 aesni_intel
lrw 16384 1 aesni_intel
snd_seq 69632 2 snd_seq_midi_event,snd_seq_midi
gf128mul 16384 1 lrw
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
glue_helper 16384 1 aesni_intel
snd_timer 32768 2 snd_pcm,snd_seq
ablk_helper 16384 1 aesni_intel
cryptd 20480 1338 aesni_intel,ablk_helper
uvcvideo 90112 0
snd 81920 17 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device
input_leds 16384 0
soundcore 16384 1 snd
serio_raw 16384 0
videobuf2_vmalloc 16384 1 uvcvideo
videobuf2_memops 16384 1 videobuf2_vmalloc
videobuf2_core 49152 1 uvcvideo
v4l2_common 16384 1 videobuf2_core
videodev 172032 3 uvcvideo,v4l2_common,videobuf2_core
btusb 45056 0
btrtl 16384 1 btusb
media 24576 2 uvcvideo,videodev
btbcm 16384 1 btusb
idma64 20480 0
btintel 16384 1 btusb
virt_dma 16384 1 idma64
bluetooth 516096 37 bnep,btbcm,btrtl,btusb,rfcomm,btintel
shpchp 36864 0
mei_me 32768 0
processor_thermal_device 16384 0
mei 98304 1 mei_me
intel_soc_dts_iosf 16384 1 processor_thermal_device
iosf_mbi 16384 2 intel_soc_dts_iosf,intel_rapl
intel_lpss_pci 16384 0
intel_lpss_acpi 16384 0
intel_lpss 16384 2 intel_lpss_pci,intel_lpss_acpi
int3403_thermal 16384 0
mac_hid 16384 0
int3402_thermal 16384 0
int3400_thermal 16384 0
int340x_thermal_zone 16384 3 int3402_thermal,processor_thermal_device,int3403_thermal
acpi_thermal_rel 16384 1 int3400_thermal
acpi_pad 20480 0
tpm_crb 16384 0
parport_pc 32768 0
ppdev 20480 0
lp 20480 0
parport 49152 3 lp,ppdev,parport_pc
autofs4 40960 2
i915 1130496 4
i2c_algo_bit 16384 1 i915
drm_kms_helper 126976 1 i915
r8169 81920 0
mii 16384 1 r8169
drm 356352 9 i915,drm_kms_helper,nvidia
ahci 36864 3
libahci 32768 1 ahci
i2c_hid 20480 0
hid 118784 2 i2c_hid,hid_generic
video 36864 1 i915
pinctrl_sunrisepoint 28672 0
pinctrl_intel 20480 1 pinctrl_sunrisepoint

Thoroniul · December 22, 2015, 6:35pm

Here is the xorg log file right after reboot:

[ 9.606]
X.Org X Server 1.17.2
Release Date: 2015-06-16
[ 9.606] X Protocol Version 11, Revision 0
[ 9.606] Build Operating System: Linux 3.13.0-68-generic x86_64 Ubuntu
[ 9.606] Current Operating System: Linux michael-xubuntu-linux 4.2.0-22-generic #27-Ubuntu SMP Thu Dec 17 22:57:08 UTC 2015 x86_64
[ 9.606] Kernel command line: BOOT_IMAGE=/vmlinuz-4.2.0-22-generic.efi.signed root=/dev/mapper/xubuntu--vg-root ro quiet splash vt.handoff=7
[ 9.606] Build Date: 12 November 2015 05:33:29PM
[ 9.606] xorg-server 2:1.17.2-1ubuntu9.1 (For technical support please see http://www.ubuntu.com/support)
[ 9.606] Current version of pixman: 0.32.6
[ 9.606] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 9.606] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
9.606 Log file: "/var/log/Xorg.0.log", Time: Tue Dec 22 13:16:32 2015
9.606 Using config file: "/etc/X11/xorg.conf"
9.606 Using system config directory "/usr/share/X11/xorg.conf.d"
9.607 ServerLayout "layout"
9.607 |-->Screen "nvidia" (0)
9.607 | |-->Monitor ""
9.607 | |-->Device "nvidia"
9.607 No monitor specified for screen "nvidia".
Using a default monitor configuration.
9.607 |-->Inactive Device "intel"
9.607 Automatically adding devices
9.607 Automatically enabling devices
9.607 Automatically adding GPU devices
9.607 The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 9.607] Entry deleted from font path.
9.607 The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 9.607] Entry deleted from font path.
9.607 The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 9.607] Entry deleted from font path.
9.607 The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 9.607] Entry deleted from font path.
9.607 The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 9.607] Entry deleted from font path.
9.607 FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
9.607 ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
9.607 The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
9.607 Loader magic: 0x558584debd40
9.607 Module ABI versions:
[ 9.607] X.Org ANSI C Emulation: 0.4
[ 9.607] X.Org Video Driver: 19.0
[ 9.607] X.Org XInput driver : 21.0
[ 9.607] X.Org Server Extension : 9.0
9.608 xfree86: Adding drm device (/dev/dri/card0)
9.608 xfree86: Adding drm device (/dev/dri/card1)
9.609 PCI:*(0:0:2:0) 8086:1916:1043:1d1d rev 7, Mem @ 0xdd000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64
9.609 PCI: (0:1:0:0) 10de:139a:1043:1d1d rev 162, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
9.609 "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
9.609 "glx" will be loaded by default.
9.609 LoadModule: "glx"
9.610 Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
9.719 Module glx: vendor="NVIDIA Corporation"
[ 9.720] compiled for 4.0.2, module version = 1.0.0
[ 9.720] Module class: X.Org Server Extension
9.720 NVIDIA GLX Module 352.63 Sat Nov 7 20:52:00 PST 2015
9.721 LoadModule: "nvidia"
9.721 Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
9.729 Module nvidia: vendor="NVIDIA Corporation"
[ 9.729] compiled for 4.0.2, module version = 1.0.0
[ 9.729] Module class: X.Org Video Driver
9.730 LoadModule: "modesetting"
9.730 Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
9.731 Module modesetting: vendor="X.Org Foundation"
[ 9.731] compiled for 1.17.2, module version = 1.17.2
[ 9.731] Module class: X.Org Video Driver
[ 9.731] ABI class: X.Org Video Driver, version 19.0
9.731 NVIDIA dlloader X Driver 352.63 Sat Nov 7 20:29:25 PST 2015
9.731 NVIDIA Unified Driver for all Supported NVIDIA GPUs
9.731 modesetting: Driver for Modesetting Kernel Drivers: kms
9.731 using VT number 7

9.733 Loading sub module "fb"
9.733 LoadModule: "fb"
9.733 Loading /usr/lib/xorg/modules/libfb.so
9.734 Module fb: vendor="X.Org Foundation"
[ 9.734] compiled for 1.17.2, module version = 1.0.0
[ 9.734] ABI class: X.Org ANSI C Emulation, version 0.4
9.734 Loading sub module "wfb"
9.734 LoadModule: "wfb"
9.735 Loading /usr/lib/xorg/modules/libwfb.so
9.736 Module wfb: vendor="X.Org Foundation"
[ 9.736] compiled for 1.17.2, module version = 1.0.0
[ 9.736] ABI class: X.Org ANSI C Emulation, version 0.4
9.736 Loading sub module "ramdac"
9.736 LoadModule: "ramdac"
9.736 Module "ramdac" already built-in
9.738 modeset(G0): using drv /dev/dri/card0
9.738 NVIDIA(0): Creating default Display subsection in Screen section
"nvidia" for depth/fbbpp 24/32
9.739 NVIDIA(0): Depth 24, (==) framebuffer bpp 32
9.739 NVIDIA(0): RGB weight 888
9.739 NVIDIA(0): Default visual is TrueColor
9.739 NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
9.740 NVIDIA(0): Option "ConstrainCursor" "off"
9.740 NVIDIA(0): Option "AllowEmptyInitialConfiguration" "on"
9.740 NVIDIA(0): Option "IgnoreDisplayDevices" "CRT"
9.740 NVIDIA(0): Enabling 2D acceleration
9.994 NVIDIA: Allocated GPU:0 (GPU-abc6fc49-741c-03eb-29c4-cb5c52d6d5dc) @
9.994 NVIDIA: PCI:0000:01:00.0
9.995 NVIDIA: Freed GPU:0 (GPU-abc6fc49-741c-03eb-29c4-cb5c52d6d5dc) @
9.995 NVIDIA: PCI:0000:01:00.0
9.995 NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
9.996 NVIDIA(0): NVIDIA GPU GeForce GTX 950M (GM107-A) at PCI:1:0:0 (GPU-0)
9.996 NVIDIA(0): Memory: 2097152 kBytes
9.996 NVIDIA(0): VideoBIOS: 82.07.86.00.13
9.996 NVIDIA(0): Detected PCI Express Link width: 16X
9.996 NVIDIA(0): Validated MetaModes:
9.996 NVIDIA(0): "NULL"
9.996 NVIDIA(0): Virtual screen size determined to be 640 x 480
9.996 NVIDIA(0): Unable to get display device for DPI computation.
9.996 NVIDIA(0): DPI set to (75, 75); computed from built-in default
9.996 modeset(G0): Depth 24, (==) framebuffer bpp 32
9.996 modeset(G0): Option "AccelMethod" "None"
9.996 modeset(G0): RGB weight 888
9.996 modeset(G0): Default visual is TrueColor
9.996 modeset(G0): glamor disabled
9.996 modeset(G0): ShadowFB: preferred YES, enabled YES
9.997 modeset(G0): Output eDP-1-0 has no monitor section
10.001 modeset(G0): Output HDMI-1-0 has no monitor section
10.002 modeset(G0): EDID for output eDP-1-0
10.002 modeset(G0): Manufacturer: AUO Model: 38ed Serial#: 0
10.002 modeset(G0): Year: 2014 Week: 43
10.002 modeset(G0): EDID Version: 1.4
10.002 modeset(G0): Digital Display Input
10.002 modeset(G0): 6 bits per channel
10.002 modeset(G0): Digital interface is DisplayPort
10.002 modeset(G0): Max Image Size [cm]: horiz.: 34 vert.: 19
10.002 modeset(G0): Gamma: 2.20
10.002 modeset(G0): No DPMS capabilities specified
10.002 modeset(G0): Supported color encodings: RGB 4:4:4
10.002 modeset(G0): First detailed timing is preferred mode
10.002 modeset(G0): Preferred mode is native pixel format and refresh rate
10.002 modeset(G0): redX: 0.580 redY: 0.335 greenX: 0.330 greenY: 0.565
10.002 modeset(G0): blueX: 0.155 blueY: 0.140 whiteX: 0.313 whiteY: 0.329
10.002 modeset(G0): Manufacturer's mask: 0
10.002 modeset(G0): Supported detailed timing:
10.002 modeset(G0): clock: 142.0 MHz Image Size: 344 x 193 mm
10.002 modeset(G0): h_active: 1920 h_sync: 2028 h_sync_end 2076 h_blank_end 2100 h_border: 0
10.002 modeset(G0): v_active: 1080 v_sync: 1090 v_sync_end 1100 v_blanking: 1126 v_border: 0
10.002 modeset(G0): Unknown vendor-specific block f
10.002 modeset(G0): AUO
10.002 modeset(G0): B156HTN03.8
10.002 modeset(G0): EDID (in hex):
10.002 modeset(G0): 00ffffffffffff0006afed3800000000
10.002 modeset(G0): 2b1801049522137802bbf59455549027
10.002 modeset(G0): 23505400000001010101010101010101
10.002 modeset(G0): 010101010101783780b470382e406c30
10.002 modeset(G0): aa0058c1100000180000000f00000000
10.002 modeset(G0): 00000000000000000020000000fe0041
10.002 modeset(G0): 554f0a202020202020202020000000fe
10.002 modeset(G0): 004231353648544e30332e38200a00b0
10.002 modeset(G0): Printing probed modes for output eDP-1-0
10.002 modeset(G0): Modeline "1920x1080"x60.1 142.00 1920 2028 2076 2100 1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)
10.002 modeset(G0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
10.002 modeset(G0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
10.002 modeset(G0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
10.002 modeset(G0): Modeline "1600x1024"x60.2 103.12 1600 1600 1656 1664 1024 1024 1029 1030 +hsync +vsync (62.0 kHz d)
10.002 modeset(G0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
10.002 modeset(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
10.002 modeset(G0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz d)
10.002 modeset(G0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
10.002 modeset(G0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
10.002 modeset(G0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
10.002 modeset(G0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz d)
10.002 modeset(G0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
10.002 modeset(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
10.002 modeset(G0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
10.002 modeset(G0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
10.002 modeset(G0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
10.002 modeset(G0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
10.002 modeset(G0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
10.002 modeset(G0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
10.002 modeset(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
10.002 modeset(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
10.002 modeset(G0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
10.002 modeset(G0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
10.002 modeset(G0): Modeline "800x512"x120.3 51.56 800 800 828 832 512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
10.002 modeset(G0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
10.002 modeset(G0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
10.002 modeset(G0): Modeline "720x450"x119.8 53.25 720 760 836 952 450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
10.002 modeset(G0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
10.002 modeset(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
10.002 modeset(G0): Modeline "680x384"x119.6 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
10.002 modeset(G0): Modeline "680x384"x119.9 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
10.002 modeset(G0): Modeline "576x432"x120.1 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
10.002 modeset(G0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
10.002 modeset(G0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
10.002 modeset(G0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
10.002 modeset(G0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
10.006 modeset(G0): EDID for output HDMI-1-0
10.006 modeset(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
10.006 modeset(G0): DPI set to (96, 96)
10.006 Loading sub module "fb"
10.006 LoadModule: "fb"
10.006 Loading /usr/lib/xorg/modules/libfb.so
10.006 Module fb: vendor="X.Org Foundation"
[ 10.006] compiled for 1.17.2, module version = 1.0.0
[ 10.006] ABI class: X.Org ANSI C Emulation, version 0.4
10.006 Loading sub module "shadow"
10.006 LoadModule: "shadow"
10.006 Loading /usr/lib/xorg/modules/libshadow.so
10.007 Module shadow: vendor="X.Org Foundation"
[ 10.007] compiled for 1.17.2, module version = 1.1.0
[ 10.007] ABI class: X.Org ANSI C Emulation, version 0.4
10.007 Depth 24 pixmap format is 32 bpp
10.008 modeset(G0): Backing store enabled
10.008 modeset(G0): Silken mouse enabled
10.008 modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
10.008 modeset(G0): DPMS enabled
10.008 modeset(G0): Option "AllowEmptyInitialConfiguration" is not used
10.008 modeset(G0): Option "IgnoreDisplayDevices" is not used
10.289 NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
10.289 NVIDIA: access.
10.311 NVIDIA(0): Built-in logo is bigger than the screen.
10.311 NVIDIA(0): Setting mode "NULL"
10.317 NVIDIA(0): Disabling shared memory pixmaps
10.317 NVIDIA(0): Backing store enabled
10.317 NVIDIA(0): Silken mouse enabled
10.317 NVIDIA(0): DPMS enabled
10.317 Loading sub module "dri2"
10.317 LoadModule: "dri2"
10.317 Module "dri2" already built-in
10.317 NVIDIA(0): [DRI2] Setup complete
10.317 NVIDIA(0): [DRI2] VDPAU driver: nvidia
10.317 RandR disabled
10.320 SELinux: Disabled on system
10.321 Initializing extension GLX
10.321 Indirect GLX disabled.(II) modeset(G0): Damage tracking initialized
10.339 XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
10.346 config/udev: Adding input device Power Button (/dev/input/event2)
10.346 Power Button: Applying InputClass "evdev keyboard catchall"
10.346 LoadModule: "evdev"
10.346 Loading /usr/lib/xorg/modules/input/evdev_drv.so
10.348 Module evdev: vendor="X.Org Foundation"
[ 10.348] compiled for 1.17.1, module version = 2.9.2
[ 10.348] Module class: X.Org XInput Driver
[ 10.348] ABI class: X.Org XInput driver, version 21.0
10.348 Using input driver 'evdev' for 'Power Button'
10.348 Power Button: always reports core events
10.348 evdev: Power Button: Device: "/dev/input/event2"
10.348 evdev: Power Button: Vendor 0 Product 0x1
10.348 evdev: Power Button: Found keys
10.348 evdev: Power Button: Configuring as keyboard
10.348 Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
10.348 XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
10.348 Option "xkb_rules" "evdev"
10.348 Option "xkb_model" "pc105"
10.348 Option "xkb_layout" "us"
10.348 config/udev: Adding input device Video Bus (/dev/input/event4)
10.348 Video Bus: Applying InputClass "evdev keyboard catchall"
10.348 Using input driver 'evdev' for 'Video Bus'
10.348 Video Bus: always reports core events
10.348 evdev: Video Bus: Device: "/dev/input/event4"
10.348 evdev: Video Bus: Vendor 0 Product 0x6
10.348 evdev: Video Bus: Found keys
10.348 evdev: Video Bus: Configuring as keyboard
10.348 Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
10.348 XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
10.348 Option "xkb_rules" "evdev"
10.348 Option "xkb_model" "pc105"
10.348 Option "xkb_layout" "us"
10.349 config/udev: Adding input device Video Bus (/dev/input/event5)
10.349 Video Bus: Applying InputClass "evdev keyboard catchall"
10.349 Using input driver 'evdev' for 'Video Bus'
10.349 Video Bus: always reports core events
10.349 evdev: Video Bus: Device: "/dev/input/event5"
10.349 evdev: Video Bus: Vendor 0 Product 0x6
10.349 evdev: Video Bus: Found keys
10.349 evdev: Video Bus: Configuring as keyboard
10.349 Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/LNXVIDEO:01/input/input5/event5"
10.349 XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
10.349 Option "xkb_rules" "evdev"
10.349 Option "xkb_model" "pc105"
10.349 Option "xkb_layout" "us"
10.349 config/udev: Adding input device Lid Switch (/dev/input/event0)
10.349 No input driver specified, ignoring this device.
10.349 This device may have been added with another device file.
10.349 config/udev: Adding input device Sleep Button (/dev/input/event1)
10.349 Sleep Button: Applying InputClass "evdev keyboard catchall"
10.349 Using input driver 'evdev' for 'Sleep Button'
10.349 Sleep Button: always reports core events
10.349 evdev: Sleep Button: Device: "/dev/input/event1"
10.349 evdev: Sleep Button: Vendor 0 Product 0x3
10.349 evdev: Sleep Button: Found keys
10.349 evdev: Sleep Button: Configuring as keyboard
10.349 Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
10.349 XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
10.349 Option "xkb_rules" "evdev"
10.349 Option "xkb_model" "pc105"
10.349 Option "xkb_layout" "us"
10.350 config/udev: Adding input device USB2.0 VGA UVC WebCam (/dev/input/event6)
10.350 USB2.0 VGA UVC WebCam: Applying InputClass "evdev keyboard catchall"
10.350 Using input driver 'evdev' for 'USB2.0 VGA UVC WebCam'
10.350 USB2.0 VGA UVC WebCam: always reports core events
10.350 evdev: USB2.0 VGA UVC WebCam: Device: "/dev/input/event6"
10.350 evdev: USB2.0 VGA UVC WebCam: Vendor 0x4f2 Product 0xb54b
10.350 evdev: USB2.0 VGA UVC WebCam: Found keys
10.350 evdev: USB2.0 VGA UVC WebCam: Configuring as keyboard
10.350 Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input6/event6"
10.350 XINPUT: Adding extended input device "USB2.0 VGA UVC WebCam" (type: KEYBOARD, id 10)
10.350 Option "xkb_rules" "evdev"
10.350 Option "xkb_model" "pc105"
10.350 Option "xkb_layout" "us"
10.350 config/udev: Adding input device ELAN1000:00 04F3:0401 (/dev/input/event12)
10.350 ELAN1000:00 04F3:0401: Applying InputClass "evdev pointer catchall"
10.350 Using input driver 'evdev' for 'ELAN1000:00 04F3:0401'
10.350 ELAN1000:00 04F3:0401: always reports core events
10.350 evdev: ELAN1000:00 04F3:0401: Device: "/dev/input/event12"
10.351 evdev: ELAN1000:00 04F3:0401: Vendor 0x4f3 Product 0x401
10.351 evdev: ELAN1000:00 04F3:0401: Found 3 mouse buttons
10.351 evdev: ELAN1000:00 04F3:0401: Found scroll wheel(s)
10.351 evdev: ELAN1000:00 04F3:0401: Found relative axes
10.351 evdev: ELAN1000:00 04F3:0401: Found x and y relative axes
10.351 evdev: ELAN1000:00 04F3:0401: Configuring as mouse
10.351 evdev: ELAN1000:00 04F3:0401: Adding scrollwheel support
10.351 evdev: ELAN1000:00 04F3:0401: YAxisMapping: buttons 4 and 5
10.351 evdev: ELAN1000:00 04F3:0401: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
10.351 Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-5/i2c-ELAN1000:00/0018:04F3:0401.0001/input/input12/event12"
10.351 XINPUT: Adding extended input device "ELAN1000:00 04F3:0401" (type: MOUSE, id 11)
10.351 evdev: ELAN1000:00 04F3:0401: initialized for relative axes.
10.352 ELAN1000:00 04F3:0401: (accel) keeping acceleration scheme 1
10.352 ELAN1000:00 04F3:0401: (accel) acceleration profile 0
10.352 ELAN1000:00 04F3:0401: (accel) acceleration factor: 2.000
10.352 ELAN1000:00 04F3:0401: (accel) acceleration threshold: 4
10.352 config/udev: Adding input device ELAN1000:00 04F3:0401 (/dev/input/mouse0)
10.352 No input driver specified, ignoring this device.
10.352 This device may have been added with another device file.
10.352 config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event10)
10.352 No input driver specified, ignoring this device.
10.352 This device may have been added with another device file.
10.352 config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event11)
10.352 No input driver specified, ignoring this device.
10.352 This device may have been added with another device file.
10.352 config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
10.352 No input driver specified, ignoring this device.
10.352 This device may have been added with another device file.
10.353 config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
10.353 No input driver specified, ignoring this device.
10.353 This device may have been added with another device file.
10.353 config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9)
10.353 No input driver specified, ignoring this device.
10.353 This device may have been added with another device file.
10.353 config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
10.353 AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
10.353 Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
10.353 AT Translated Set 2 keyboard: always reports core events
10.353 evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
10.353 evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
10.353 evdev: AT Translated Set 2 keyboard: Found keys
10.353 evdev: AT Translated Set 2 keyboard: Configuring as keyboard
10.353 Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
10.353 XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
10.353 Option "xkb_rules" "evdev"
10.353 Option "xkb_model" "pc105"
10.353 Option "xkb_layout" "us"
11.065 modeset(G0): EDID vendor "AUO", prod id 14573
11.065 modeset(G0): Printing DDC gathered Modelines:
11.065 modeset(G0): Modeline "1920x1080"x0.0 142.00 1920 2028 2076 2100 1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)
11.340 modeset(G0): EDID vendor "AUO", prod id 14573
11.340 modeset(G0): Printing DDC gathered Modelines:
11.340 modeset(G0): Modeline "1920x1080"x0.0 142.00 1920 2028 2076 2100 1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)
11.356 modeset(G0): EDID vendor "AUO", prod id 14573
11.356 modeset(G0): Printing DDC gathered Modelines:
11.356 modeset(G0): Modeline "1920x1080"x0.0 142.00 1920 2028 2076 2100 1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)
12.445 modeset(G0): EDID vendor "AUO", prod id 14573
12.445 modeset(G0): Printing DDC gathered Modelines:
12.445 modeset(G0): Modeline "1920x1080"x0.0 142.00 1920 2028 2076 2100 1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)
25.604 modeset(G0): EDID vendor "AUO", prod id 14573
25.604 modeset(G0): Printing DDC gathered Modelines:
25.604 modeset(G0): Modeline "1920x1080"x0.0 142.00 1920 2028 2076 2100 1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)
33.364 modeset(G0): EDID vendor "AUO", prod id 14573
33.364 modeset(G0): Printing DDC gathered Modelines:
33.364 modeset(G0): Modeline "1920x1080"x0.0 142.00 1920 2028 2076 2100 1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)