Help Needed: Computer Fried After Blackout

     My power went out for over 5 hours yesterday, and when I tried to turn on my computer for the first time after the blackout this morning, literally nothing happened. I have no clear idea as to what is wrong with it (my best guess is the power supply is fried), but here is what I know so far.

1.) The computer was running prior to the blackout (it was loading a Youtube video while I was in another room. I didn't see it turn off and didn't go down to check it until the morning after the blackout.)

2.) When I tried to turn on the computer this morning, nothing happened. No front panel lights turned on, no case fans spun, nothing. Normally when the power goes out I can try to turn on the computer and the fans will light up and spin for a split second (back-up battery on the motherboard?) but nothing this time. This may be due to #1.

3.) The computer was plugged in through a surge protector, but it is a fairly old one. Everything else on the surge protector still worked, including two monitors, a wireless router, a cable modem and a set of speakers.

4.) My mouse has a blue LED that is constantly on as long as the USB ports have power (including when the computer is turned off). It was on this morning and stayed on while I tried to start the computer. When I switched off the power supply or the surge protector it turned off, but when I switched either back on the LED turned back on. I have no idea what that means, or how it is happening.

     My system specs are in my profile, and I unfortunately don't have another PSU to test whether or not that is the problem, but I do have a multimeter if that is of any use. If anyone has any idea of what it might be, I would appreciate your help.

Do you have another power supply you can test with? Also try clearing the CMOS if that helps. 

What the . . . ? How the . . . ? Nevermind, I'll just file that under the "Things to do after you have turned it off and back on again" list. Thank you for your help.

What?

Yeah, what he said makes no sense.

Are you being sarcastic brennan? lol

No, I`m agreeing with you. 

Ok I was confused haha. And yes I don't know what he's talking about. Though after I reread the post he siad that he doesn't have another PSU.

You do know that the computer doesn`t have to be turned on all the way to clear CMOS, right?

WEll the first step would be to locate a new PSU to test on the hardware. Or alternativley remove the PSU from the PC. Connect a fan or a light or anything that will change states when powered. Jump the green to any black wire on the 24 pin connector. If anything lights up or moves then the PSU is not the issue.

The problem with PSUs (especially cheaper ones) is that they don't provide much surge protection to the system and when they blow may sometimes take other componentry with it.