Gigabyte X570 boards ecc ram support

[wingrider]

Thank you for replying.
Were you able to validate ECC is correcting errors.
Are the ecc errors logged for your Motherboard.

A previous thread mentioned problems with Gigabyte on TRX40 platform and was wondering if it’s also a problem on X570.

ECC UDIMM support on TRX40 motherboards from ASUS, ASRock, Gigabyte, MSI

Hello Wendell, I just put testing the gigabyte trx40 aurus extreme on hold after not being abe to trigger single bit and let alone dual bit errors. Even the most recent build of memtest86 indicates no ecc support. The methods I used was shorting pins 2 and 5 and also masta killa’s (he has been in contact with you regarding ryzen 9 ecc support) mem tuning settings. Nothing, nada, zero While it is soo easy to do on Ryzen 9 setups where masta killa and I are now able to reliably prove/demonstrate single bit detection, correction and reporting and multi bit detection and reporting on ASUS Prime x570 - P and Asrock Rack x470d4u2-2t (confirmation for x470d4u2 is in progress) The official statement I got from Gigabyte 1st line tech support, so could be completly BS, is that ECC works by default just no bios settings and that it does not report, only detects and corrects single bit errors. But if we can’t assess that it is we must believe it is not. What engineer in their right mind would leave out the reporting part of ECC? That guy should have become a gardener in my humble opinion. Anyway, do you or any one following /reading this thread have any results you could share?