Hey here is my rig http://uk.pcpartpicker.com/user/Matthew12106/saved/3xIa
So I wanted to check how the temps were doing so I ran prime95 in a 15 minute test under the mode of
In-Place Large FFTs ( Maximum Heat Power Consumtion, Some Ram Tested )
Anyway I did it and made a graph of the Socket Tempreture and The Core tempreture if you didnt know
the socket for fx processors arn't meant to go above 71 degrees and the cores are not meant to go above 61 So Here is my graph
Cores:
As you can see the cores pretty much instantly hit 50 and stay on 50 + or - two degrees and did not near reach the 61 limit After a minute they were on 49.7 and after the whole test they reached 51.8 with a max of 52.6 so pretty happy with that
Socket:
Bit diffrent pretty much hits 60 as you can see and goes up a degree every one or two minutes after one minute they were on 57 and ended up with a max of 69 they got a lot more close to their max of 71 unlike the cores
Also another thing worth mentioning is every time I run prime core 5 always fails after about 2 minutes and it says Possible Hardware Failure
Illegal Sumout
Should I be worried? Anyway tell me what you think about the temps