Does anyone have a working bios for the asrock ROMED8-2T for Epyc 7001 cpu's?

Does anyone have a working bios for the asrock ROMED8-2T for Epyc 7001 cpu’s?

I have tried 1.30 and 1.10 from asrocks website but I just cant seem to get theM to work.

I log into the ipmi web GUI
go to the bios update menu
select a version
and upload and then install

However once the system has power cycled, nothing has changed.
It still does not say the new version as it never posts
Code 00

00 code means CPU issue (I think, been a while since I worked with AsRock) . Check power connection from PSU to CPU.

When building my original TR build I had a no post situation. Turned out to be the CPU had not seated correctly. I removed and reinstalled it then everything worked fine. Check the pins when you have the CPU out.

Have you done a CMOS reset on the board?

Also, check your RAM. If your slots are not fully populated, make sure your RAM is in the proper slots per the MoBo manual. Seen that bite a few people too. Should not be a 00 code, but since you are in there, give everything a good once over.

Check all the caps on your MoBo as well for leakage or visible issues. Your nose will tell you if anything burned out.