Return to Level1Techs.com

Desperate Linux fan needs some help... V-V


#61

Got blocked for some hours, I copy pasted the last logs I could pull out of Linux Mint. Does it help?


#62

I doubt it since the issue happen in no other OS except Linux, maybe not in non-Ubuntu based ones. :slight_smile: Not to mention someone else over at LTT with almost same CPU and same chipset(other board model) had exact same issue… (his solution was to stick to 14.04 until he replaced it all with Ryzen.)


#63

What is Solaris based on?


#64

Lol.

I think it’s derived from BSD. You don’t want to use it, and not for that reason.


#65

Have you considered getting a pcie usb card with a modern usb chipset?

Does USB on your case have usb2 or usb3 headers?


#66

I got a ASRock PCI-E card actually, that also stops to function if I remember right… (I could try it again tough maybe I will get lucky?)


#67

BSD is that terrible? :S


#68

No, but Oracle and Solaris is.

Use a library card system before using that piece of garbage.


#69

Is this usable info?

Nov 25 19:56:41 ntpd: Soliciting pool server 2a02:a18:7510:200::
Nov 25 19:56:22 dbus-daemon: [system] Reloaded configuration
Nov 25 19:56:22 systemd: Reloading.
Nov 25 19:56:20 wpa_supplicant: wlp7s6: CTRL-EVENT-SIGNAL-CHANGE above=1 signal=-46 noise=-86 txrate=270000
Nov 25 19:56:20 systemd: Started LSB: automatic crash report generation.
Nov 25 19:56:20 apport: …done.
Nov 25 19:56:20 systemd: Starting LSB: automatic crash report generation…
Nov 25 19:56:17 dbus-send: method return time=1543172177.309625 sender=org.freedesktop.DBus -> destination=:1.82 serial=3 reply_serial=2
Nov 25 19:56:17 dbus-daemon: [system] Reloaded configuration
Nov 25 19:56:17 systemd: Reloading D-Bus System Message Bus.
Nov 25 19:56:16 dbus-daemon: [system] Reloaded configuration
Nov 25 19:56:16 systemd: Reloading.
Nov 25 19:56:16 udisksd: Acquired the name org.freedesktop.UDisks2 on the system message bus
Nov 25 19:56:16 systemd: Started Disk Manager.
Nov 25 19:56:15 udisksd: Failed to load the ‘mdraid’ libblockdev plugin
Nov 25 19:56:15 systemd: Starting Disk Manager…
Nov 25 19:56:15 udisksd: udisks daemon version 2.7.6 exiting
Nov 25 19:56:15 systemd: Stopping Disk Manager…
Nov 25 19:56:15 dbus-daemon: [system] Reloaded configuration
Nov 25 19:56:14 systemd: Reloading.
Nov 25 19:56:11 packagekitd: daemon quit
Nov 25 19:56:11 systemd: Reloaded D-Bus System Message Bus.
Nov 25 19:56:11 dbus-send: method return time=1543172171.166429 sender=org.freedesktop.DBus -> destination=:1.79 serial=3 reply_serial=2
Nov 25 19:56:11 dbus-daemon: [system] Reloaded configuration
Nov 25 19:56:11 systemd: Reloading D-Bus System Message Bus.
Nov 25 19:56:10 dbus-daemon: [system] Reloaded configuration
Nov 25 19:56:10 systemd: Started Dispatcher daemon for systemd-networkd.
Nov 25 19:56:10 networkd-dispat: WARNING: systemd-networkd is not running, output will be incomplete.
Nov 25 19:56:10 systemd: Starting Dispatcher daemon for systemd-networkd…
Nov 25 19:55:48 dbus-send: method return time=1543172148.343512 sender=org.freedesktop.DBus -> destination=:1.77 serial=3 reply_serial=2
Nov 25 19:55:48 dbus-daemon: [system] Reloaded configuration
Nov 25 19:55:48 systemd: Reloading D-Bus System Message Bus.
Nov 25 19:55:48 dbus-daemon: [system] Reloaded configuration
Nov 25 19:55:46 systemd: Reloading.
Nov 25 19:55:45 dbus-daemon: [system] Reloaded configuration
Nov 25 19:55:45 systemd: Reloading.
Nov 25 19:55:44 kernel: debug: running subtest /usr/lib/os-probes/mounted/efi
Nov 25 19:55:41 kernel: QNX4 filesystem 0.2.3 registered.
Nov 25 19:55:41 kernel: ntfs: driver 2.1.32 [Flags: R/O MODULE].
Nov 25 19:55:41 kernel: JFS: nTxBlock = 8192, nTxLock = 65536
Nov 25 19:55:41 kernel: SGI XFS with ACLs, security attributes, realtime, no debug enabled
Nov 25 19:55:40 avahi-daemon: No service file found in /etc/avahi/services.
Nov 25 19:55:38 kernel: audit: type=1400 audit(1543172138.518:52): apparmor=“STATUS” operation=“profile_replace” info=“same as current profile, skipping” profile=“unconfined” name=“man_groff” pid=21714 comm=“apparmor_parser”
Nov 25 19:55:38 kernel: kauditd_printk_skb: 16 callbacks suppressed
Nov 25 19:55:38 apparmor_parser: AVC apparmor=“STATUS” operation=“profile_replace” info=“same as current profile, skipping” profile=“unconfined” name=“man_groff” pid=21714 comm=“apparmor_parser”
Nov 25 19:55:38 ntpd: receive: Unexpected origin timestamp 0xdfa56ea3.829a215b does not match aorg 0000000000.00000000 from [email protected] xmt 0xdfa56eaa.7015fb57
Nov 25 19:55:25 NetworkManager: [1543172125.0475] supplicant: wpa_supplicant die count reset
Nov 25 19:55:24 systemd: Reloading.
Nov 25 19:55:24 grub-common: …done.
Nov 25 19:55:24 systemd: Starting LSB: Record successful boot for GRUB…
Nov 25 19:55:24 ntpd: Soliciting pool server 77.95.77.250

Nov 25 20:58:41 systemd-journal: Time spent on flushing to /var is 7.727ms for 977 entries.
Nov 25 20:58:41 systemd: Started udev Kernel Device Manager.
Nov 25 20:58:41 keyboard-setup.: cannot open file /tmp/tmpkbd.S96gRp
Nov 25 20:58:41 kernel: Inserted module ‘parport_pc’
Nov 25 20:58:41 systemd-journal: Runtime journal (/run/log/journal/0be4b885ddb347e5bc70559303dca99f) is 8.0M, max 160.4M, 152.4M free.
Nov 25 20:58:41 kernel: ppdev: user-space parallel port driver
Nov 25 20:58:41 kernel: lp: driver loaded but no devices found
Nov 25 20:58:41 kernel: EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
Nov 25 20:58:41 kernel: Listening on /dev/initctl Compatibility Named Pipe.
Nov 25 20:58:41 kernel: Created slice System Slice.
Nov 25 20:58:41 kernel: Reached target System Time Synchronized.
Nov 25 20:58:41 kernel: Set up automount Arbitrary Executable File Formats File System Automount Point.
Nov 25 20:58:41 kernel: Started Forward Password Requests to Wall Directory Watch.
Nov 25 20:58:41 kernel: Set hostname to .
Nov 25 20:58:41 kernel: Detected architecture x86-64.
Nov 25 20:58:41 kernel: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
Nov 25 20:58:41 kernel: ip_tables: © 2000-2006 Netfilter Core Team
Nov 25 20:58:41 kernel: EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Nov 25 20:58:41 kernel: clocksource: Switched to clocksource tsc
Nov 25 20:58:41 kernel: Btrfs loaded, crc32c=crc32c-intel
Nov 25 20:58:41 kernel: xor: automatically using best checksumming function avx
Nov 25 20:58:41 kernel: raid6: using ssse3x2 recovery algorithm
Nov 25 20:58:41 kernel: [drm] {1920x1080, [email protected]}
Nov 25 20:58:41 kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x420bee34340, max_idle_ns: 440795428783 ns
Nov 25 20:58:41 kernel: tsc: Refined TSC clocksource calibration: 4581.982 MHz
Nov 25 20:58:41 kernel: [drm] Initialized amdgpu 3.23.0 20150101 for 0000:03:00.0 on minor 0
Nov 25 20:58:41 kernel: amdgpu 0000:03:00.0: kfd not supported on this ASIC
Nov 25 20:58:41 kernel: Console: switching to colour frame buffer device 240x67
Nov 25 20:58:41 kernel: fbcon: amdgpudrmfb (fb0) is primary device
Nov 25 20:58:41 kernel: [drm] pitch is 7680
Nov 25 20:58:41 kernel: sd 3:0:0:0: [sdd] Attached SCSI disk
Nov 25 20:58:41 kernel: sdd: sdd1 sdd2
Nov 25 20:58:41 kernel: sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
Nov 25 20:58:41 kernel: scsi 3:0:0:0: Direct-Access ATA ST2000DX001-1NS1 CC41 PQ: 0 ANSI: 5
Nov 25 20:58:41 kernel: ata4.00: configured for UDMA/133
Nov 25 20:58:41 kernel: [drm] UVD and UVD ENC initialized successfully.
Nov 25 20:58:41 kernel: sd 2:0:0:0: [sdc] Attached SCSI disk
Nov 25 20:58:41 kernel: sdc: sdc1
Nov 25 20:58:41 kernel: [drm] ring test on 11 succeeded in 11 usecs
Nov 25 20:58:41 kernel: sd 1:0:0:0: [sdb] Attached SCSI disk
Nov 25 20:58:41 kernel: sdb: sdb1 sdb2 sdb3 sdb4 sdb5
Nov 25 20:58:41 kernel: sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
Nov 25 20:58:41 kernel: scsi 2:0:0:0: Direct-Access ATA ST2000DM001-1ER1 CC25 PQ: 0 ANSI: 5
Nov 25 20:58:41 kernel: sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Nov 25 20:58:41 kernel: scsi 1:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
Nov 25 20:58:41 kernel: ata2.00: configured for UDMA/133
Nov 25 20:58:41 kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
Nov 25 20:58:41 kernel: scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
Nov 25 20:58:41 kernel: ata2.00: NCQ Send/Recv Log not supported
Nov 25 20:58:41 kernel: ata1.00: configured for UDMA/133
Nov 25 20:58:41 kernel: ata2.00: supports DRM functions and may not be fully accessible

Nov 25 21:12:52 systemd-journal: Time spent on flushing to /var is 6.525ms for 974 entries.
Nov 25 21:12:52 systemd: Starting Flush Journal to Persistent Storage…
Nov 25 21:12:52 keyboard-setup.: cannot open file /tmp/tmpkbd.S96gRp
Nov 25 21:12:52 systemd-modules: Inserted module ‘ppdev’
Nov 25 21:12:52 systemd-journal: Runtime journal (/run/log/journal/0be4b885ddb347e5bc70559303dca99f) is 8.0M, max 160.4M, 152.4M free.
Nov 25 21:12:52 kernel: EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
Nov 25 21:12:52 kernel: parport0: irq 0 detected
Nov 25 21:12:52 kernel: ppdev: user-space parallel port driver
Nov 25 21:12:52 kernel: lp: driver loaded but no devices found
Nov 25 21:12:52 kernel: Starting Load Kernel Modules…
Nov 25 21:12:52 kernel: Listening on Journal Socket.
Nov 25 21:12:52 kernel: Created slice System Slice.
Nov 25 21:12:52 kernel: Reached target Remote File Systems.
Nov 25 21:12:52 kernel: Started Forward Password Requests to Wall Directory Watch.
Nov 25 21:12:52 kernel: Created slice User and Session Slice.
Nov 25 21:12:52 kernel: Set hostname to .
Nov 25 21:12:52 kernel: Detected architecture x86-64.
Nov 25 21:12:52 kernel: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
Nov 25 21:12:52 kernel: ip_tables: © 2000-2006 Netfilter Core Team
Nov 25 21:12:52 kernel: EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Nov 25 21:12:52 kernel: Btrfs loaded, crc32c=crc32c-intel
Nov 25 21:12:52 kernel: xor: automatically using best checksumming function avx
Nov 25 21:12:52 kernel: raid6: using ssse3x2 recovery algorithm
Nov 25 21:12:52 kernel: [drm] {1920x1080, [email protected]}
Nov 25 21:12:52 kernel: clocksource: Switched to clocksource tsc
Nov 25 21:12:52 kernel: tsc: Refined TSC clocksource calibration: 4581.983 MHz
Nov 25 21:12:52 kernel: [drm] Initialized amdgpu 3.23.0 20150101 for 0000:03:00.0 on minor 0
Nov 25 21:12:52 kernel: amdgpu 0000:03:00.0: kfd not supported on this ASIC
Nov 25 21:12:52 kernel: Console: switching to colour frame buffer device 240x67
Nov 25 21:12:52 kernel: fbcon: amdgpudrmfb (fb0) is primary device
Nov 25 21:12:52 kernel: [drm] pitch is 7680
Nov 25 21:12:52 kernel: sd 3:0:0:0: [sdd] Attached SCSI disk
Nov 25 21:12:52 kernel: sdd: sdd1 sdd2
Nov 25 21:12:52 kernel: sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
Nov 25 21:12:52 kernel: scsi 3:0:0:0: Direct-Access ATA ST2000DX001-1NS1 CC41 PQ: 0 ANSI: 5
Nov 25 21:12:52 kernel: ata4.00: configured for UDMA/133
Nov 25 21:12:52 kernel: sd 2:0:0:0: [sdc] Attached SCSI disk
Nov 25 21:12:52 kernel: sdc: sdc1
Nov 25 21:12:52 kernel: ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Nov 25 21:12:52 kernel: [drm] UVD and UVD ENC initialized successfully.
Nov 25 21:12:52 kernel: sd 1:0:0:0: [sdb] Attached SCSI disk
Nov 25 21:12:52 kernel: sdb: sdb1 sdb2 sdb3 sdb4 sdb5
Nov 25 21:12:52 kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Nov 25 21:12:52 kernel: sda: sda1 sda2
Nov 25 21:12:52 kernel: sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
Nov 25 21:12:52 kernel: scsi 2:0:0:0: Direct-Access ATA ST2000DM001-1ER1 CC25 PQ: 0 ANSI: 5
Nov 25 21:12:52 kernel: sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
Nov 25 21:12:52 kernel: scsi 1:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
Nov 25 21:12:52 kernel: ata2.00: configured for UDMA/133
Nov 25 21:12:52 kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
Nov 25 21:12:52 kernel: ata2.00: NCQ Send/Recv Log not supported

19:58:41 systemd: Started Hostname Service.
19:58:41 dbus-daemon: [system] Successfully activated service ‘org.freedesktop.hostname1’
19:58:41 systemd: Starting Hostname Service…
19:58:41 dbus-daemon: [system] Activating via systemd: service name=‘org.freedesktop.hostname1’ unit=‘dbus-org.freedesktop.hostname1.service’ requested by ‘:1.79’ (uid=1000 pid=2578 comm="gnome-logs " label=“unconfined”)
19:56:54 anacron: Job cron.daily’ terminated 19:56:52 rsyslogd: [origin software=“rsyslogd” swVersion=“8.32.0” x-pid=“929” x-info=“http://www.rsyslog.com”] rsyslogd was HUPed 19:56:52 systemd: Started Make remote CUPS printers available locally. 19:56:51 logger: no dictionary update necessary. 19:56:51 anacron: Updated timestamp for jobcron.daily’ to 2018-12-01
19:55:54 udisksd: Mounted /dev/sdc1 at /media/kmj/2TB Hard Drive on behalf of uid 1000
19:55:54 systemd: Started Clean the /media/kmj/2TB Hard Drive mount point.
19:55:54 mount.ntfs: Global ownership and permissions enforced, configuration type 7
19:55:35 systemd: Started Hostname Service.
19:55:35 dbus-daemon: [system] Successfully activated service ‘org.freedesktop.hostname1’
19:55:35 systemd: Starting Hostname Service…
19:55:35 dbus-daemon: [system] Activating via systemd: service name=‘org.freedesktop.hostname1’ unit=‘dbus-org.freedesktop.hostname1.service’ requested by ‘:1.73’ (uid=1000 pid=2578 comm=“gnome-logs " label=“unconfined”)
19:54:40 sudo: pam_unix(sudo:auth): auth could not identify password for [kmj]
19:54:22 systemd: Started Hostname Service.
19:54:22 dbus-daemon: [system] Successfully activated service ‘org.freedesktop.hostname1’
19:54:22 systemd: Starting Hostname Service…
19:54:22 dbus-daemon: [system] Activating via systemd: service name=‘org.freedesktop.hostname1’ unit=‘dbus-org.freedesktop.hostname1.service’ requested by ‘:1.69’ (uid=1000 pid=2248 comm=“xfce4-terminal --preferences " label=“unconfined”)
19:53:03 ntpd: Soliciting pool server 2a02:a18:7510:200::
19:52:37 systemd: Started Stop ureadahead data collection.
19:52:26 pulseaudio: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
19:52:26 dbus-daemon: [system] Failed to activate service ‘org.bluez’: timed out (service_start_timeout=25000ms)
19:52:22 systemd: Removed slice User Slice of lightdm.
19:52:22 (sd-pam): pam_unix(systemd-user:session): session closed for user lightdm
19:52:22 systemd: Received SIGRTMIN+24 from PID 2062 (kill).
19:52:22 systemd-logind: Removed session c3.
19:52:22 systemd: Stopped Session c3 of user lightdm.
19:52:21 systemd-timesyn: Synchronized to time server 91.189.89.198:123 (ntp.ubuntu.com).
20:52:17 lightdm: pam_succeed_if(lightdm:auth): requirement “user ingroup nopasswdlogin” not met by user “kmj”
20:52:16 systemd: Started Virtual filesystem service.
20:52:16 dbus-daemon: [session uid=110 pid=1999] Successfully activated service ‘org.gtk.vfs.Daemon’
20:52:16 systemd: Starting Virtual filesystem service…
20:52:16 dbus-daemon: [session uid=110 pid=1999] Activating via systemd: service name=‘org.gtk.vfs.Daemon’ unit=‘gvfs-daemon.service’ requested by ‘:1.1’ (uid=110 pid=1995 comm=”/usr/sbin/slick-greeter " label=“unconfined”)
20:52:16 systemd: Started Accessibility services bus.
20:52:16 dbus-daemon: [session uid=110 pid=1999] Successfully activated service ‘org.a11y.Bus’
20:52:16 systemd: Starting Accessibility services bus…
20:52:16 dbus-daemon: [session uid=110 pid=1999] Activating via systemd: service name=‘org.a11y.Bus’ unit=‘at-spi-dbus-bus.service’ requested by ‘:1.4’ (uid=110 pid=1995 comm=”/usr/sbin/slick-greeter " label=“unconfined”)
20:52:16 slick-greeter-s: New keyboard configuration: rules: evdev
model: pc105
layout: no
20:52:16 slick-greeter-c: Window scale: 1
20:52:16 dbus-daemon: [session uid=110 pid=1999] Successfully activated service ‘ca.desrt.dconf’
20:52:16 systemd: Started D-Bus User Message Bus.
20:52:16 (systemd): pam_unix(systemd-user:session): session opened for user lightdm by (uid=0)
20:52:16 systemd: Started Session c3 of user lightdm.
20:52:16 systemd-logind: New session c3 of user lightdm.
20:52:16 systemd: Starting User Manager for UID 110…
20:52:16 lightdm: pam_unix(lightdm-greeter:session): session opened for user lightdm by (uid=0)
20:52:13 nm-dispatcher: req:1 ‘connectivity-change’: start running ordered scripts…
20:52:13 systemd: Started Network Manager Script Dispatcher Service.

20:11:07 pulseaudio: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
20:11:07 dbus-daemon: [system] Failed to activate service ‘org.bluez’: timed out (service_start_timeout=25000ms)
20:11:02 systemd-timesyn: Synchronized to time server 91.189.91.157:123 (ntp.ubuntu.com).
21:11:01 wpa_supplicant: wlp7s6: CTRL-EVENT-SIGNAL-CHANGE above=1 signal=-36 noise=-86 txrate=240000
21:10:54 nm-dispatcher: req:1 ‘connectivity-change’: start running ordered scripts…
21:10:54 systemd: Started Network Manager Script Dispatcher Service.
21:10:54 dbus-daemon: [system] Successfully activated service ‘org.freedesktop.nm_dispatcher’
21:10:54 systemd: Starting Network Manager Script Dispatcher Service…
21:10:54 dbus-daemon: [system] Activating via systemd: service name=‘org.freedesktop.nm_dispatcher’ unit=‘dbus-org.freedesktop.nm-dispatcher.service’ requested by ‘:1.11’ (uid=0 pid=914 comm="/usr/sbin/NetworkManager --no-daemon " label=“unconfined”)
21:10:54 NetworkManager: [1543695054.2295] manager: NetworkManager state is now CONNECTED_GLOBAL
21:10:45 ntpd: new interface(s) found: waking up resolver
21:10:43 avahi-daemon: Registering new address record for fe80::6ec6:356b:3462:3861 on wlp7s6.*.
21:10:43 ntpd: new interface(s) found: waking up resolver
21:10:42 ntpdate: the NTP socket is in use, exiting
21:10:41 pulseaudio: [pulseaudio] pid.c: Daemon already running.
21:10:41 rtkit-daemon: Supervising 7 threads of 2 processes of 1 users.
21:10:41 pulseaudio: [pulseaudio] pid.c: Daemon already running.
21:10:41 rtkit-daemon: Supervising 7 threads of 2 processes of 1 users.
21:10:41 dbus-daemon: [system] Activating via systemd: service name=‘org.bluez’ unit=‘dbus-org.bluez.service’ requested by ‘:1.53’ (uid=1000 pid=1380 comm="/usr/bin/pulseaudio --start --log-target=syslog " label=“unconfined”)
21:10:41 rtkit-daemon: Supervising 6 threads of 1 processes of 1 users.
21:10:41 systemd-resolve: Using degraded feature set (UDP) for DNS server 192.168.38.1.
21:10:41 nm-dispatcher: req:2 ‘up’ [wlp7s6]: start running ordered scripts…
21:10:41 NetworkManager: [1543695041.8739] device (wlp7s6): Activation: successful, device activated.
21:10:41 dhclient: bound to 192.168.38.113 – renewal in 65401 seconds.
21:10:41 NetworkManager: [1543695041.8686] manager: NetworkManager state is now CONNECTED_LOCAL
21:10:41 avahi-daemon: Registering new address record for 192.168.38.113 on wlp7s6.IPv4.
21:10:41 NetworkManager: [1543695041.8637] dhcp4 (wlp7s6): state changed unknown -> bound
21:10:41 dhclient: DHCPACK of 192.168.38.113 from 192.168.38.1
21:10:41 wpa_supplicant: wlp7s6: CTRL-EVENT-SIGNAL-CHANGE above=1 signal=-48 noise=-86 txrate=1000
21:10:41 NetworkManager: [1543695041.7301] dhcp4 (wlp7s6): dhclient started with pid 1534
21:10:41 kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s6: link becomes ready
21:10:41 wpa_supplicant: wlp7s6: CTRL-EVENT-CONNECTED - Connection to 34:21:09:2f:f0:c0 completed [id=0 id_str=]
21:10:41 systemd: Started Portal service.
21:10:41 dbus-daemon: [session uid=1000 pid=1246] Successfully activated service ‘org.freedesktop.portal.Desktop’
21:10:41 systemd: Started Portal service (GTK+/GNOME implementation).
21:10:41 dbus-daemon: [session uid=1000 pid=1246] Successfully activated service ‘org.freedesktop.impl.portal.desktop.gtk’
21:10:41 systemd: Started Virtual filesystem service - Apple File Conduit monitor.
21:10:41 dbus-daemon: [session uid=1000 pid=1246] Successfully activated service ‘org.gtk.vfs.AfcVolumeMonitor’
21:10:41 gvfs-afc-volume: Volume monitor alive
21:10:41 systemd: Starting Virtual filesystem service - Apple File Conduit monitor…
21:10:41 dbus-daemon: [session uid=1000 pid=1246] Activating via systemd: service name=‘org.gtk.vfs.AfcVolumeMonitor’ unit=‘gvfs-afc-volume-monitor.service’ requested by ‘:1.28’ (uid=1000 pid=1422 comm="/usr/lib/x86_64-linux-gnu/tumbler-1/tumblerd " label=“unconfined”)
21:10:41 systemd: Started Virtual filesystem service - Media Transfer Protocol monitor.
21:10:41 dbus-daemon: [session uid=1000 pid=1246] Successfully activated service ‘org.gtk.vfs.MTPVolumeMonitor’
21:10:41 systemd: Starting Portal service (GTK+/GNOME implementation)…
21:10:41 dbus-daemon: [session uid=1000 pid=1246] Activating via systemd: service name=‘org.freedesktop.impl.portal.desktop.gtk’ unit=‘xdg-desktop-portal-gtk.service’ requested by ‘:1.40’ (uid=1000 pid=1454 comm="/usr/lib/xdg-desktop-portal/xdg-desktop-portal " label=“unconfined”)
21:10:41 systemd: Started Bluetooth OBEX service.
21:10:41 dbus-daemon: [session uid=1000 pid=1246] Successfully activated service ‘org.bluez.obex’
21:10:41 obexd: OBEX daemon 5.48
21:10:41 dbus-daemon: [session uid=1000 pid=1246] Activating via systemd: service name=‘org.gtk.vfs.MTPVolumeMonitor’ unit=‘gvfs-mtp-volume-monitor.service’ requested by ‘:1.28’ (uid=1000 pid=1422 comm="/usr/lib/x86_64-linux-gnu/tumbler-1/tumblerd " label=“unconfined”)
21:10:41 systemd: Started Virtual filesystem service - digital camera monitor.
21:10:41 dbus-daemon: [session uid=1000 pid=1246] Successfully activated service ‘org.gtk.vfs.GPhoto2VolumeMonitor’


#70

Does Mint use the plugdev group?


#71

unless you are connecting to a router or your system auto-negotiates your network cabling you will need a crossover cable if just connecting between 2 machines.

usb ports being disabled in bios by your linux os? something doesn’t sound right here!
can you post a screenshots of the bios displays relating to the usb and hdd modes?

also a distro that is not mac, linux, or windows based!
there is only two that i know of
unix, and minix
minix is a derivitive of unix and linux was designed as an alternative to minix


#72

Is that still a thing? o_0


#73

yes have 6 of them in my network tool bag (different lengths)
best way to isolate from a network when doing net-install and forensic work


#74

Yeah although its a lot less mainstream these days since it’s no longer needed for the uplink connection on routers.


#75

Why do I need the cable? I am using the wifi-card. O3O


#76

1000BASE-T spec requires Auto MDI/MDI-X, so you probably don’t need it if you’re working with anything built over the last decade; unless you’re doing hardware hacking or some other weird thing.


#77

Well theres your problem.


#78

Ohhhh so close! I’m sorry Sebastian, but that’s INCORRECT.

The correct answer was: “No, we don’t shit on other people’s hardware choices.”

So close, so close! But you do leave home today with this car door, toilet brush, and a smile.

Better luck next time. Okay folks that about WRAPS it up today for The Internet Game Show. Tune in tomorrow, where we ssh to a Linux server, on PowerShell, ON A MAC.


#79

That is a issue why? It worked fine with 14.04 do the fucktards at canonical not support it with 16.04 and up or something?


#80

Someone on the LTT forum told me to try:
Nevermind, just found on the internet the issue. Linux does not like IOMMU from that motherboard, causing all sort of weird issues, and it is a never solved bug. It’s a shame…

However there is a workaround… as listed in

https://bugs.launchpad.net/ubuntu/+source/external-storage-manager/+bug/1447267

From what I understand, you could:

Disable IOMMU completely from the bios, overclocking settings (I’ve got an msi Mobo and that option is there, don’t ask why)

Or/Also edit /etc/default/grub

and add to where … are the other option present in there (normally splash and quiet)

GRUB_CMDLINE_LINUX_DEFAULT="… iommu=soft"

then do update-grub command, and reboot. if you want to test it this workaround “works”, just press E on a GRUB entry from the USB live bootloader and add after the quiet and splash parameters iommu=soft