Terrible luck with my ram situation seemingly. The computer runs perfeclty until it randomly crashes and tells me i had a parity error in windows once i boot back into it.
The computer will sometimes crash from a windows session then hang on 0d. Very frustrating. Its been 5 to 6 months of fighting with various threadripper systems and im still not stable. Im starting to loose hope here.
All of the ram i have put in the system i have ran at JADEC speeds. I am going to try loading up the gskill zeta ram i have into the system and running it with an xmp profile enabled at 4800 mhz just to see if maybe the extra voltage will help.
Any thoughts, input , help with this would be appreciated.
I did a search on the web for advice relevant to memory errors like this. A common suggestion is to ensure the CPU is seated and tensioned correctly, and to inspect for any bent pins, dust, or debris in the socket. (See here for example.)
I think the issues are kind of crazy because as opposed to some of the other people on this forum with this board, my board pefectly trains and loads up w.e memory i put in every time.
Its just once i hit windows eventually I am met with system restarts and ocasionally hangs on 0D after the computer has restarted from the crash .
Once power off the computer and power it back on it boots as usual and eventually the same thing happens.
I remember you mentioned that you might swap out the motherboard under the store’s exchange policy. Did you end up doing that, or is this still the original board?
Well I haven’t been able to get to the bottom of whats going on so I am returning this board in exchange for the same board. Hopefully maybe the issues will go away but i have a feeling its probably not the board giving the issues. I still want to rule that out while i still can. I had to request an extension on the return period for this board.
I am thinking i am going to try to get some kingston ram but ill have to wait around for it. The only kit i can see on the qvl list is the Kingston Fury Renegade Pro so ill probalby get a 256 gig kit at 32 gb a dim for the board. That may take some time to get here.
I could try getting a power supply but i am not sure if thats necessary. Currently I have the Evga T2 Titanium Powersuppply .
The cpu i am still getting things set with is the Threadripper 7965.
I agree, however It seems to be a bit of a one off and not exactly correlated with the microwave specifically. The microwave is in another room so i dont necessarily think EMI is the issue. That said , i do think this house likely has power issues that could be contributing to my problems.
if we get the same behavior with this board well know for sure something else is going on , god willing this board has no issues. One thing i haven’t swapped once in my system is the psu.
i’m going to see if things run fine with the evga t2 1600… if not we can go from there. Meanwhile looking into my power situation.
fwiw I too will be headed to mc tomorrow to get another board
another board mailed in here is behaving strangely and I’m not sure what to make of it. asus agreed to an rma but I’m 10 days in and getting an email every other day “thanks for your patience, we don’t have any spares, looking into it” which is not encouraging.
Of course…well if thats the response YOUR getting…lord knows my experience wouldn’t fair much better. Im going to be keeping you posted on everything. I just want this board to at the very least work as well as the other one did.
Everytime i go to microcenter its a 2 and a half hour drive there and back. This process … lol .
We press on!
What kind of weird behavior are you getting and do you have one that is just working ?
A bit messy atm but things are coming together…as of right now I have everything back up and running as it was before with the new board and the board is performing as nicely as it was before, barring the random restarts / 0d stalls after restart.
As of typing this message i had one restart and upon the computer restarting it did get stuck on 0D again so thats a sign to me that the issue is still here. It happened when I was dragging photoshop across my 8 dispalys while having many things running. Tried to replicate the issue but it wouldnt.
Strongly Considering replacing the power supply with the seasonic i grabbed.
Still waiting to receive my Rma’d 4090 Suprim in the mail.
